sr-users June 2016

sr-users@lists.kamailio.org

85 participants
125 discussions

How to make OutBound calls with kamailio
by sharad tyagi 23 May '17

23 May '17

Hi I am novice to kamailio , I have installed kamailio-4.2.0 and SIREMIS. I have add and registered two IP phones with kamailio these phone able to call each other. How can i make outbound call with that I am using a asterisk server as PSTN Gateway. i am not famalier with kamailio script. Regards Sharad Tyagi SparkTG info Pvt Ltd

4 3

Cannot hear voice with symmetric NAT and STUN
by Khoa Pham 08 Feb '17

08 Feb '17

Hi, I have Kamailio as SIP server and RTP server. Client is PJSIP. I read that STUN is for non-symmetric NAT, and RTP server is for symmetric NAT. Supposed A calls B. If A, B both use symmetric NAT and STUN, they cannot hear each other If A or B use non-symmetric NAT and NOT using STUN, they cannot hear each other. Why is that? I read http://tools.ietf.org/id/draft-takeda-symmetric-nat-traversal-00.txt for Prediction Failure, is that related to this problem ? -- Khoa Pham HCMC University of Science Faculty of Information Technology

8 18

(no subject)
by jay binks 24 Jan '17

24 Jan '17

Hi Guys, Im using a keepalived solution between 2 kamailio boxes, with net.ipv4.ip_nonlocal_bind =1 . On the "non master" I pretty much constantly get these logs in syslog. What Im looking for is a way to suppress these because they are expected in my configuration. is there any way to tell kamailio to not log this... ( or at least, not at CRIT and ERROR ) *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: tm [../../forward.h:208]: msg_send(): udp_send failed* *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: <core> [udp_server.c:576]: udp_send(): sendto(sock,0x7fc0732d5ab0,380,0,xxx.xxx.xxx.xxx:5060,16): Invalid argument(22)* *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: CRITICAL: <core> [udp_server.c:581]: udp_send(): invalid sendtoparameters#012one possible reason is the server is bound to localhost and#012attempts to send to the net* -- Sincerely Jay

4 9

Using the auth_ephemeral module
by Hemanshu Vadehra 17 Jan '17

17 Jan '17

I'm involved in setting up a Kamailio instance and was hoping to make use of the auth_ephemeral module for authentication. But the module documentation doesn't quite make clear how exactly the module is to be employed or the web service set up. Does anyone have a working example? Regards, Hemanshu Vadehra hemanshu.v(a)directi.com

5 8

Siremis installation with postgresql.
by José Seabra 16 Dec '16

16 Dec '16

Hi there, I'm facing some issues trying to install siremis with postgresql. The file Config.xml has the correct configuration for postgresql driver but It seems that during installation phase siremis can't create database structure for postgresql. Anyone have installed siremis with postgresql, if yes can you share the steps needed for this installation. -- Cumprimentos José Seabra

4 6

kamailio TLS mod_register failed
by wanmon wanmon 15 Aug '16

15 Aug '16

4 14

Kamailio on Mac
by Carlos Ruiz Díaz 04 Aug '16

04 Aug '16

Hi all, I'm switching my development environment from Linux to Mac. Is there any tutorial on how to setup Kamailio on this OS? It may be an Unix flavor, but it's still quite different from Linux :). Thanks, -- Carlos http://caruizdiaz.com http://ngvoice.com +52 55 3048 3303

6 9

A: Upgrading kamailio.org os
by Daniel-Constantin Mierla 02 Aug '16

02 Aug '16

Hello, a short note to announce that the os on kamailio.org server will be upgraded in the near future, likely next week, exact date still to be decided. Hopefully there will be only very short downtime intervals. Main affected services: website (including the wiki) and mailing lists. I will send a notification once the procedure starts, but I wanted to allow enough time for this information to propagate properly within the community. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com - http://www.kamailio.org http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

12 24

4.4.1: Only first UDP Listener is producing log messages
by Sebastian Damm 08 Jul '16

08 Jul '16

Hi, I upgraded one of our systems today to 4.4.1. And when checking whether everything is okay, I noticed, that only the first UDP listener (from kamcmd core.ps) is actually sending lines to the log. The only other logs I see are from usrloc timer worker. kamcmd> core.ps 10737 main process - attendant 10740 udp receiver child=0 sock=172.20.40.5:5060 10741 udp receiver child=1 sock=172.20.40.5:5060 10742 udp receiver child=2 sock=172.20.40.5:5060 10743 udp receiver child=3 sock=172.20.40.5:5060 We are sending quite a lot of information via xlog("L_NOTICE", "foo"); to syslog, but the only lines I see are from PID 10740. Kamailio works fine otherwise, handling all requests, the usrloc entries didn't drop, and customers don't complain. So I think it's only a logging issue. There are about 50k registrations on the machine and more than 10 Mbit of traffic. When I downgrade to 4.3.5, I get output from all listeners again. Has there been any change between 4.3 and 4.4 regarding logging? The upgrade document says nothing about this. Best Regards, Sebastian

2 4

Issue loading ims_dialog module
by Vikram Chhibber 01 Jul '16

01 Jul '16

Hi All, I am trying to bring-up PCSCF on releae 4.4 and I am getting errors related to loading of ims_dialog module. The mpath is set correctly in kamailio.cfg and ims_dialog.so is present in that path. Interestingly, it is able to load rest of the modules from the same locaiton. ls -lrt /usr/local/lib64/kamailio/modules/ims_dialog.so -rwxr-xr-x 1 root root 953760 Jun 29 16:37 /usr/local/lib64/kamailio/modules/ims_dialog.so Any pointers will be appreciated. -- Unit kamailio.service has begun starting up. Jun 29 17:08:17 kamailio1 kamctl[2914]: ** INFO: Starting Kamailio : Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [sr_module.c:582]: load_module(): could not open module </usr/local/lib64/kamailio/modules/ims_dialog.so Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3365]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 169, colum Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <ims_dialog> found Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 313, colum Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <ims_dialog> found Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 314, colum Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <ims_dialog> found Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 315, colum Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <ims_dialog> found Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 316, colum Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [cfg.y:3228]: yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1) Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 1009, colu Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [cfg.y:3228]: yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1) Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio//kamailio.cfg, line 1077, colu Jun 29 17:08:17 kamailio1 kamailio[2939]: INFO: <core> [sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized Jun 29 17:08:20 kamailio1 kamctl[2914]: ** ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed Jun 29 17:08:20 kamailio1 systemd[1]: kamailio.service: Control process exited, code=exited status=1 Jun 29 17:08:20 kamailio1 systemd[1]: Failed to start Kamailio SIP Server. -- Subject: Unit kamailio.service has failed Thanks

2 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2016