Hello
when I compiled rtpengine for kamailio (in Kazoo)? there were no errors while compiling, but when restarting kamailio - I saw:kamailio: ERROR: <core> [modparam.c:150]: set_mod_param_regex(): No module matching <rtpengine> found
[root@ip-192-168-130-136 kamailio]# locate rtpengine.so/usr/lib64/kamailio/modules/rtpengine.so
default.cfg:mpath="/usr/lib64/kamailio/modules/"
Does it mean that something wrong with rtpengine compilation? (I compiled manually)
Appreciate any help.
Hi guys i did the "running skype-like service in less than one hour" and got it running ok.
Kamailio run remotely in a datacenter.
but i am trying to get the communication working locally between two devices behind the same NAT.
I know the #!define WITH_NAT shoud get the call working bidirectionnaly but that is not the case, I've got one way dial every time i'm attempting call !
running a network capture (please find attached to this email )reveal rtp does not flow correctly:
the device A 192.168.3.33 send RTP straight to device B 192.168.3.98 ---> OK
device B does not behave like that, rather to talk to A (192.168.3.33) it sends RTprotocol to the public_ip of my internet box (refered as public_ip red text in my .png capture)
and the WAN leg of my box answers ICMP 242 Destination unreachable (port unreachable)
So comes blind communicatios.
But that is not supposely act like that, right ?
RTP should be relayed by the rtpproxy running on the remote Kamailio and we should have:
device A -----> remote_kamailio_ip ----> device B
device B -----> remote_kamailio_ip ----> device A
thx you for any help
PS: see attached file
Hello,
we are trying to connect our Kamailio SIP to an Oracle database. We tried
both db_oracle and db_unixodbc modules to connect to the DB.
With db_oracle, Kamailio core dumps when trying to access the
active_watchers table (caused by the oracle CLOB?). Here is the kamailio
logs:
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: <core>
[db_query.c:131]: db_do_query_internal(): DB-QUERY: select
presentity_uri,callid,to_tag
,from_tag,event from active_watchers where updated=:1 AND event=:2
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:238]: get_columns(): COLUMN PRESENTITY_URI TYPE 4 SIZE 129
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:238]: get_columns(): COLUMN CALLID TYPE 4 SIZE 256
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:238]: get_columns(): COLUMN TO_TAG TYPE 4 SIZE 65
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:238]: get_columns(): COLUMN FROM_TAG TYPE 4 SIZE 65
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:238]: get_columns(): COLUMN EVENT TYPE 4 SIZE 65
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23665]: INFO: db_oracle
[res.c:378]: get_rows(): OCIStmtFetch2() returned 100
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23667]: CRITICAL: <core>
[pass_fd.c:275]: receive_fd(): EOF on 16
Apr 29 13:54:53 newvm1 /usr/sbin/kamailio[23667]: CRITICAL: <core>
[pass_fd.c:275]: receive_fd(): EOF on 14
What is really strange is that this table is accessed several times before
the crash, without any problem. The other point is that this table is
absolutely empty...
With db_unixodbc, all requests having dates check fail because because the
date format is not understood by oracle. The date should be converted using
the oracle to_date(date, format) funtion to work...
Here are the Kamilio traces:
Apr 29 14:10:38 newvm1 /usr/sbin/kamailio[17021]: ERROR: usrloc
[dlist.c:183]: get_all_db_ucontacts(): query error
Apr 29 14:10:38 newvm1 /usr/sbin/kamailio[17021]: ERROR: nathelper
[nathelper.c:2089]: nh_timer(): failed to fetch contacts
Apr 29 14:10:39 newvm1 /usr/sbin/kamailio[17021]: ERROR: db_unixodbc
[dbase.c:133]: db_unixodbc_submit_query(): rv=-1. Query= select
received,contact,socket,cflags,path,ruid from$
Apr 29 14:10:39 newvm1 /usr/sbin/kamailio[17021]: ERROR: db_unixodbc
[connection.c:220]: db_unixodbc_extract_error():
unixodbc:SQLExecDirect=HY000:1:933:[Oracle][ODBC][Ora]ORA-00$
Apr 29 14:10:39 newvm1 /usr/sbin/kamailio[17021]: ERROR: <core>
[db_query.c:132]: db_do_query_internal(): error while submitting query
I tried the option modparam("db_unixodbc", "use_escape_common", 1), but
without success.
Has anyone been able to make Kamailio 4.4.0 work with Oracle 11g, either
with db_oracle or with db_unixodbc module?
Regards
Giovanni
--
View this message in context: http://sip-router.1086192.n5.nabble.com/Kamailio-and-Oracle-database-tp1479…
Sent from the Users mailing list archive at Nabble.com.
During a re-invite, it looks I get a strange decode error if the Route
header is to long, or is there something else I have missed...
23(23945) DEBUG: rr [rr_cb.c:95]: run_rr_callbacks(): callback id 0
entered with
<transport=tls;r2=on;lr=on;ftag=as03d8c4db;vsf=AAAAAEFVRVNSRxtbXFhFITUbBwcLEQBaQAFVDkVFUXI9cGhvbmU->
23(23945) DEBUG: uac [replace.c:527]: restore_uri(): getting 'vsf' Route
param
23(23945) DEBUG: uac [replace.c:535]: restore_uri(): route param is
'AAAAAEFVRVNSRxtbXFhFITUbBwcLEQBaQAFVDkVFUXI9cGhvbmU-' (len=52)
23(23945) DEBUG: uac [replace.c:609]: restore_uri(): decoded uris are:
new=[sip:xxxxxxxxxx@u*5?%"9tu3{6dB
@hone]
old=[sip:xxxx.xxxx@10.0.0.1:5060]
Kamailio 4.3.4 is used.
--
Best regards
Glenn Larsen
Hello,
I am a newbie in Kamailio configuration. I would be very grateful if you
can provide me with a simple Kamailio.cfg file that achieves the below
scenario:
1. Machines A and B are able to register on Kamailio Sip Server.
2. Machine A is able to call Machine B through Kamailio SIP
server using x-lite.
Noting that Machines A and B are on the same network.
Thanks in advance.
Regards,
Ali
Kamailio receives a fairly arbitrary out of dialog NOTIFY on an interface with a private IP address (eth1). It runs it through the following code which relays it to an IP/port combo pulled from a hash table.
The IP that it is relaying to is a public address and should be addressed out of the interface with a public IP address (eth0). It is, however, sent on the private interface (eth1) and thus never reaches its target.
route[PHONEREBOOT] {
# Only handle check-sync (Polycom) NOTIFY
if (!is_method("NOTIFY") || $hdr(Event)!="check-sync")
return;
# Look up ip:port combo in the agentloc hash table
if ($sht(agentloc=>$rU)==$null)
return;
# Set SIP URI to point to the agent
$ru = "sip:" + $rU + "@" + $sht(agentloc=>$rU);
route(RELAY);
exit;
}
Is there a way to explicitly set the source interface to relay on?
Thanks
Phil Lavin
Telecoms Systems Manager
CloudCall by SYNETY
www.cloudcall.com<http://www.cloudcall.com/>
T: +44 (0) 330 335 0000 / +1 617 982 1600
D: +44 (0) 116 424 4790 / +1 716 242 6604
SM: LinkedIn<https://uk.linkedin.com/pub/phil-lavin/25/422/750>
READ OUR BLOG FOR SMARTER COMMUNICATIONS<http://t.sidekickopen03.com/e1t/c/5/f18dQhb0S7lC8dDMPbW2n0x6l2B9nMJW7t5XX43…>
Confidentiality: This e-mail transmission, including any attachments, is intended only for the named recipient(s) and may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this transmission in error, or are not the named recipient(s), please notify the sender immediately by return e-mail and permanently delete this transmission, including any attachments.
Security: This e-mail and any attachments are believed to be free from any virus but it is the responsibility of the recipient to ensure this is so. E-mail is not a 100% secure communication.
Hello,
Kamailio SIP Server v4.4.1 stable release is out.
This is a maintenance release of the latest stable branch, 4.4, that
includes fixes since release of v4.4.1. There is no change to database
schema or configuration language structure that you have to do on
previous installations of v4.4.x. Deployments running previous v4.x.x
versions are strongly recommended to be upgraded to v4.4.1.
For more details about version 4.4.1 (including links and guidelines to
download the tarball or from GIT repository), visit:
* https://www.kamailio.org/w/2016/05/kamailio-v4-4-1-released/
RPM, Debian/Ubuntu packages will be available soon as well.
Many thanks to all contributing and using Kamailio! Looking forward to
meeting many of them at Kamailio World Conference 2016 next week in Berlin!
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Hello,
We would like to use some functionalities provided in ims_auth. But our
deployment uses auth/auth_db (we have another server with credentials and we
would like to avoid adding a diameter interface to it)
In particular, we want to add an Authentication-Info header to the response
Do we have to patch the auth module to achieve this, or is there some other
way ?
If we patch it, would you merge it to the master ? its important to us, so
we can easily upgrade to the next versions of kamailio.
--
View this message in context: http://sip-router.1086192.n5.nabble.com/extension-of-auth-module-tp148332.h…
Sent from the Users mailing list archive at Nabble.com.
Hello,
I am considering to do a minor release from branch 4.4 next week, likely
on Tue or Wed, May 10 or 11, 2016.
If there are issues you are aware of and not reported yet to the
tracker, do it as soon as possible to try to fix what we can by the date.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com
