sr-users April 2016

sr-users@lists.kamailio.org

76 participants
114 discussions

by huseyin kalyoncu

Hello I am trying to implement click 2 call functionality on Kamailio with dlg_bridge. But It seems that Kamailio routes REFER messages to devices according to Contact field of location table instead of Received field. But if the the IP in the Contact field is private REFER messages are failing so does the dlg_bridge. I called dlg_bridge in the config like this: dlg_bridge("sip:$param1", "sip:$param2", "sip:IP_ADDRESS_OF_KAMAILIO:5060"); It rings the device in $param1 but after answering on that device Kamailio fails to send REFER if the Contact field for that device is Private IP. So it fails to initiate a call. How can I force Kamailio to use Received field for REFER messages instead of Contact field? Thanks Huseyin

7 years, 12 months

kamailio stop to print log meesage

by Shiv Patidar

kamailio.log and syslog stop to print log message i have set debug 4 and also try with debug 2 and debug 3 and kamalio.log and syslog not print any log message what i need to do please help me

7 years, 12 months

How to run MySQL queries in Kamailio

by Ahmad Fuad

Dear Support, Kindly find below my Database Table (kamailio.ext). Column names are "ext" and "ip" mysql> select * from ext -> ; +------+----------------+ | ext | ip | +------+----------------+ | 202 | 192.168.55.157 | | 203 | 192.168.55.158 | | 204 | 192.168.55.159 | +------+----------------+ 3 rows in set (0.00 sec) I want to run this type of queries in kamailio. I have tried following command but no luck so far. Although I have added following line in the configuration file as well. Thanks modparam("sqlops", "sqlcon", "cb=>mysql://root:123456@localhost/kamailio") sql_query("cb", "select ip from ext where ext=$rU", "ra"); sl_send_reply("302","$ra"); PLEASE HELP !!! when we see the traces using wireshark it shows internal error. Thanks 275.733635441 192.168.55.144 -> 192.168.55.157 SIP 431 Status: 302 Internal Server Error | -- Best Regards, Ahmad Fuad

7 years, 12 months

kamailio-radius RPM for Centos

by Antonio Reale

Hi all, I see that the kamailio-radius rpm package is available only for Opensuse. Is there a particular reason that it is unavailable for Centos? Thanks. Regards. Antonio

7 years, 12 months

fetch data from Mysql Using Kamailio

by Shahid Mehmood

Dear All, i am getting error when i trying to fetch data from mysql data base using kamailio. i have following code into kamailio.cfg file loadmodule "db_mysql.so" loadmodule "sqlops.so" ................................ modparam("sqlops","sqlcon","ca=>mysql://root:123456@localhost/kamailio") ............................... ............................... sql_query("ca", "select * from ext", "ra"); sql_result_free("ra"); *Apr 24 06:30:31 kamalio /usr/sbin/kamailio[1385]: INFO: rr [rr_mod.c:160]: mod_init(): outbound module not availableApr 24 06:30:31 kamalio /usr/sbin/kamailio[1385]: INFO: usrloc [hslot.c:53]: ul_init_locks(): locks array size 1024Apr 24 06:30:31 kamalio /usr/sbin/kamailio[1385]: ERROR: sqlops [sqlops.c:276]: fixup_sql_query(): invalid connection [ca]Apr 24 06:30:31 kamalio /usr/sbin/kamailio[1385]: ERROR: <core> [route.c:1189]: fix_actions(): fixing failed (code=-1) at cfg://etc/kamailio/kamailio.cfg:514Apr 24 06:30:31 kamalio /usr/sbin/kamailio[1385]: ERROR: <core> [route.c:1189]: fix_actions(): fixing failed (code=-1) at cfg://etc/kamailio/kamailio.cfg:534* -- Shahid Mehmood

7 years, 12 months

fetch data from Mysql Using Kamailio

by Shahid Mehmood

7 years, 12 months

Kamailio IMS_QOS

by José Seabra

Hello There, I'm trying using the ims_qos module with PCRF for QOS, but I'm facing some issues. When kamailio receives an initial invite (originator), it will execute the function - "Rx_AAR("ORIG_SESSION_AAR","orig","",-1)", but the PCRF is not contacted and i see the following messages: 5(12153) DEBUG: <script>: Diameter: Orig authorizing media via Rx 5(12153) DEBUG: ims_qos [mod.c:609]: w_rx_aar(): Looking for route block [ORIG_SESSION_AAR] 5(12153) DEBUG: ims_qos [mod.c:621]: w_rx_aar(): Rx AAR called 5(12153) DEBUG: ims_qos [mod.c:1345]: create_return_code(): Creating return code of [-2] for aar_return_code 5(12153) DEBUG: ims_qos [mod.c:1354]: create_return_code(): created AVP successfully : [aar_return_code] 5(12153) DEBUG: ims_qos [mod.c:627]: w_rx_aar(): Can't do AAR for call session in request. Why kamailio says that I Can't do AAR for call session in request? I have looked into source code and I found that the condition that is blocking the communication with PCRF is: //We don't ever do AAR on request for calling scenario... if (msg->first_line.type != SIP_REPLY) { LM_DBG("Can't do AAR for call session in request\n"); return result; } Anyone can help me understand why it is happening? why it can't proceed if isn't a reply? Thank you for your support BR -- José Seabra

7 years, 12 months

Call http service inside config , Push notification TSILO

by Sirvan Paraste

Hello All, I am new to kamailio, but I have setup a server that is ok for call functionalities, I have write an android app it I wnat to add push notification ability to the app when it is clised or unregisterd to the sip server. I have done all push notification part using GCM service and a third party server name Uniqush-push that is connected to GCM to handle push notification, anyway the app and push server part all work well now, The problem is this: kamilio send a http request like this : curl http://127.0.0.1:9898/push -d service=myserviceName -d subscriber=6000 -d msg="Hello World" *given 6000 as a kamilio user,* I ask a nice guy and he replied me by using the TSILO as following link: http://www.kamailio.org/events/2015-KamailioWorld/Day2/20-Federico.Cabiddu-… thanks to him it made the process more easier I think. But I dont know how I can congigured kamailio to call my server as I said above in order to send push. please help me by example because I am new, I searched a lot but I get confused, I will make a tutorial for other people to help them. thanks all

7 years, 12 months

A: Ongoing process of selecting a new website theme

by Daniel-Constantin Mierla

Hello, following the last developers' meeting on IRC, we are going to update the website at kamailio.org to use a responsive theme, in order to make it more friendly for mobile browsing. Until one is selected, you may see various forms of website design for short time, as variants are enabled to see how it looks with the real content. All this should not take too long, in 1-2 days the new theme should be in place. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, Berlin, May 18-20, 2016 - http://www.kamailioworld.com

7 years, 12 months

force_send_socket

by Nagorny, Dimitry

Hi all, I've configured Kamailio to use TLS and it has two NICs, 192.x.x.x extern to a PSTN and 10.250.5.74 intern to FreeSWITCH. Kamailio has "listen=tls:10.250.5.74:5071" and later on in the config I fire "force_send_socket(tls:10.250.5.74:5071)". For some reason on calls from FreeSWITCH via Kamailkio to PSTN the TLS works but the other way around if Kamailio should do TLS to FreeSWITCH it throws this warning: "/kamailio[3308]: WARNING: <core> [forward.c:231]: get_send_socket2(): protocol/port mismatch (forced tls:10.250.5.74:5071, to udp:10.250.5.72:5071)" As a result of this Kamailio tries to send the PSTN INVITE via UDP and also tries to use the external IP (192.x.x.x) and of course this can't work. Why is it throwing this warning and how to understand it? Best regards Dimitry Nagorny Trainee

7 years, 12 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2016