sr-users October 2016

sr-users@lists.kamailio.org

61 participants
99 discussions

Serial Forking and t_suspend
by Kelvin Chua 06 Oct '16

06 Oct '16

we have serial forking already setup properly but need to t_suspend(). found out that it completely breaks the destination set. other than manually rebuilding the destination set after t_continue(), are there any other solution out there? Kelvin Chua

2 1

Re: [SR-Users] Identical Kamailio setup on 2 hosts
by Daniel Tryba 05 Oct '16

05 Oct '16

On Fri, Sep 30, 2016 at 10:29:16PM +0530, Infinicalls Infinicalls wrote: > Hi Daniel, > This seems to be ideal setup for my requirement. Would you mind > sharing the kamailio.cfg file with me (with all the important data > masked) ? Not much important stuff to censor. LBIPADDR is the ipadress of the machine itself. REGISTRARNET/30 is the net of the backend machines. The dispatcher.list contains the backend registrars The backend is essentially the default config (with an always on rtpengine) with the following additions: You need to enable path.so and set modparam("path", "use_received", 1) Tell the registrar module to use path (path_mode 1 fixes you 420 problem): modparam("registrar", "use_path", 1) modparam("registrar", "path_mode", 1) modparam("registrar", "path_use_received", 1) If you want to send keepalives from the registrar to the enduser: modparam("nathelper", "ping_nated_only", 0) modparam("nathelper", "udpping_from_path", 1) the loadbalancer config has a little blurb about relaying the sipping from the backend manually using the path header. But I'd advice to ping from the an external process to have better control (eg sipsak)

2 3

Addressing a distinct PSI result is: 555 AS Contacting Failed - iFC terminated dialog
by Valentin Christoph 05 Oct '16

05 Oct '16

Hi all, I'm trying to send a call to an AS via a kamailio S-CSCF (release 4.4.3). I'm addressing the AS by a distinct PSI: sip:04325432101@domain.net;user=gsmr. At the first try the S-CSCF sends a SAR to HSS and receives a successful SAA (tshark traces attached), but the S-CSCF rejects the call with 555 AS Contacting Failed - iFC terminated dialog. At the second try (a few seconds later), the S-CSCF doesn't exchange SAR/SAA with the HSS, and now the call is successfully forwarded to the AS. This problem is permanent, it is not the result of a temporary loss of connectivity between S-CSCF and AS. I checked the iFCs that I had configured at the HSS and I think, they are OK. I attached - tshark traces from the node, where the S-CSCF resides: 2016_09_19_error_555_17_scscf_filtered.pcap - WITH_DEBUG logs from kamailio: 2016_09_19_error_555_17_kamailio_1st_try.log - A tarball of /usr/local/etc/kamailio: 2016_09_19_error_555_17_kamailio.tar.gz Can anybody help? Is it a bug in kamailio or is the problem on my side? Thanks, Christoph The information contained in this e-mail message is privileged and confidential and is for the exclusive use of the addressee. The person who receives this message and who is not the addressee, one of his employees or an agent entitled to hand it over to the addressee, is informed that he may not use, disclose or reproduce the contents thereof, and is kindly asked to notify the sender and delete the e-mail immediately.

2 4

484 Address Incomplete error
by Infinicalls Infinicalls 05 Oct '16

05 Oct '16

Hi all, I am trying a simple proxy (with dispatcher) and a registrar. However, I have this issue U 2016/10/05 08:22:44.057195 10.0.0.4:5060 -> 52.233.25.164:5060 SIP/2.0 484 Address Incomplete. Via: SIP/2.0/UDP 10.1.0.4;branch=z9hG4bK8653.a9c65320000000000000000000000000.0;received=52.233.25.164. To: <sip:51.140.187.167:5060>;tag=b27e1a1d33761e85846fc98f5f3a7e58.b79c. From: <sip:calls@infinicalls.com>;tag=533cb9e91f4b999cf76861cbb9ed54ed-d3d8. CSeq: 10 OPTIONS. Call-ID: 28fcdbee608363cf-5442(a)127.0.0.1. Server: kamailio (4.4.3 (x86_64/linux)). Content-Length: 0. I have set modparam("dispatcher", "flags", 2) Any idea? Thanks. regards Ganesh Kumar

2 1

NatHelper - Received adding on Contact header
by Yasin CANER 04 Oct '16

04 Oct '16

3 4

Sip Proxy server_kamailio Features
by Surender Singh 03 Oct '16

03 Oct '16

Hello, Thanks to all to develop the such type Sip Proxy server. Please suggest whether SIP proxy server is open source ,If yes than it can fulfil the my below requirement . 1) I having some sip clients which are registered on IMS .Can I use the kamailio Sip proxy sever between sip client and IMS. Sip client ------------------Kamailio Sip Proxy ---------------IMS 2) Second things, can I use Kamailio Sip Proxy to interconnect two IMS nodes . Can I create the SIP trunk without registration mode (username and password) between IMS nodes using Kamailio. Because the my IMS node doesn't support sip trunk in registration mode. Its support one normal trunk (SIP-T) My current IMS set up like below. IMS-1 (IBCF)---------------IMS2(IBCF). Regards Surender Singh ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

2 1

Kamailio number of concurrent calls
by Gholamreza Sabery 03 Oct '16

03 Oct '16

I used SIPp to stress test different scenarios in Kamailio, but how can I simulate a real call with media? SIPp has media sending capabilities but in not enough for example to simulate 1000 calls persecond! How can I test this?

5 7

How to check in Kamailio if a current sip message 200 OK is a response to the BYE.
by AFRICALLSHOP 01 Oct '16

01 Oct '16

Hello, I try to check in Kamailio if a current sip message "200 OK" is a response to a "BYE" request. Could you confirm the following code please? IF (IS_METHOD("BYE") && STATUS == 200) { } Regards Abdoul.

2 3

Proxy unable to connect - 420 Bad Extension error
by Infinicalls Infinicalls 01 Oct '16

01 Oct '16

Hi, I have setup a proxy and able to connect to the registrar. However, after a few attempts, it throws the "420:Bad Extension" error, saying "Unsupported: path. Path: <sip:10.1.0.4;lr>. Supported: outbound. P-Registrar-Error: No support for found Path indicated." Any idea, how to overcome this ? 10.1.0.4 is not my IP anywhere. I don;t know where it takes that value from. Thanks. regards Ganesh Kumar

2 2

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2016