sr-users April 2015

sr-users@lists.kamailio.org

89 participants
144 discussions

Inconsistent dlg timer data warning at dialog timeout
by Mickael Marrache 15 Apr '15

15 Apr '15

Hi, I get the following warning when a dialog timeout occurs: kamailio[18889]: WARNING: dialog [dlg_req_within.c:214]: bye_reply_cb(): inconsitent dlg timer data on dlg 0x7f422986e448 [3547:6673] with clid 'mycvJWgmbmOSD5XQrcStKAKoTfW12XeR' and tags 'C5mlsaZCdTmybNSYgvWr75MBxWa5hVyA' 'L1ZzszpZ1MYO6qlQQ3FYYRWQYtF4F75r' Am I doing something wrong? Thanks, Mickael

3 6

Re: [SR-Users] No CDR is written when dialog timeouts
by Mickael Marrache 15 Apr '15

15 Apr '15

I also confirm the cdr_on_create() [acc_cdr.c:718] function is called since I can see the debug statement "dialog '%p' created!". From: Mickael Marrache [mailto:mickaelmarrache@gmail.com] Sent: Wednesday, April 15, 2015 3:48 PM To: sr-users(a)lists.sip-router.org Subject: No CDR is written when dialog timeouts Hi, I'm testing the dialog timeout scenario and I see that no CDR is written. This is my configuration: modparam("acc", "cdr_enable", 1) modparam("acc", "cdr_expired_dlg_enable", 1) modparam("acc", "cdr_start_on_confirmed", 1) modparam("acc", "cdr_log_enable", 0) modparam("acc", "cdr_on_failed", 0) I can confirm the cdr_on_expired() [acc_cdr.c:684] function is not called since I don't see the debug statement "dialog '%p' expired!\n". (I precise that CDR generation works fine for regular hangup scenario.) Any idea what can cause the issue? Thanks, Mickael

1 0

No CDR is written when dialog timeouts
by Mickael Marrache 15 Apr '15

15 Apr '15

Hi, I'm testing the dialog timeout scenario and I see that no CDR is written. This is my configuration: modparam("acc", "cdr_enable", 1) modparam("acc", "cdr_expired_dlg_enable", 1) modparam("acc", "cdr_start_on_confirmed", 1) modparam("acc", "cdr_log_enable", 0) modparam("acc", "cdr_on_failed", 0) I can confirm the cdr_on_expired() [acc_cdr.c:684] function is not called since I don't see the debug statement "dialog '%p' expired!\n". (I precise that CDR generation works fine for regular hangup scenario.) Any idea what can cause the issue? Thanks, Mickael

1 0

Shared location database used by independend kamailios
by Daniel Tryba 15 Apr '15

15 Apr '15

Is there an easy way to figure out on which server a uac is registered when using a shared database (modparam("usrloc", "db_mode", 3)). When uac1 is registered on server1 (dns srv loadbalancing) and uac2 is on server2. A call from uac1 to uac2 with a simple lookup("location") will result in server1 directly trying to connect to uac2. If this device is natted (or behind a stateful firewall) this will fail. In the location table the column socket contains the server which received the request. So if I know this value I can have server2 route the call to this value/server and have the call delivered to uac1 via an "existing connection". The idea was to use reg_fetch_contacts to fetch this/these socket values in $ulc and in case they are not local redirect/branch to those servers. But if the value of socket isn't local the $ulc for socket is null. I could use sqlops to fetch this manually, but is there an easier way I am missing?

4 9

DNS resolution and logical domain
by Mickael Marrache 15 Apr '15

15 Apr '15

Hi, I sometimes get the following errors: kamailio[16098]: ERROR: <core> [resolve.c:1693]: sip_hostport2su(): could not resolve hostname: "mycompany.com" kamailio[16098]: ERROR: tm [ut.h:319]: uri2dst2(): failed to resolve "mycompany.com" mycompany.com cannot be resolved using DNS (there is no corresponding DNS entry). I use this as a logical domain and I don't expect Kamailio to resolve it. Also, I set use_domain (usrloc module) to 0 so only the RURI username is used when searching locations. The flow is as follows: -the proxy receives the INVITE with sip: <sip:%3cuser%3e@myloadbalancerip:5060> <user>@myloadbalancerip:5060 which then forwards the INVITE to a proxy -the proxy looks for <user> internally and finds that this user has multiple subscribers (endpoints) -for each subscriber, a branch is appended using append_branch (or the RURI is replaced for the first subscriber) - the new RURI for each branch is sip: <sip:%3csubscriber%3e@mycompany.com> <subscriber>@mycompany.com -finally, lookup_branches is called to look for locations for every subscriber lookup_branches only uses the subscriber (RURI username) for searching locations since use_domain is set to 0. However, I sometimes get the errors I mentioned. Any idea why Kamailio sometimes tries to resolve the domain name? Thanks, Mickael

2 1

Error protoaddr2proxy
by Igor Potjevlesch 15 Apr '15

15 Apr '15

Hello, I got many errors like this one: ERROR: tm [tm.c:1192]: t_protoaddr2proxy(): tm: protoaddr2proxy: host name is empty It looks to be while I'm doing a sl_send_reply but I don't figure out why. Someone know what going wrong? Regards, Igor.

2 2

Carrierroute question
by Nelson Migliaro 14 Apr '15

14 Apr '15

Hello everyone, I have a SIP provider that gives me access to different routes over the same IP address but different prefixes. I have to send all calls to the same IP but I need to inlcude a prefix to allow vendor to route calls to different carriers. I will use carrierroute (cr) module and in case prefix 1 fails, I should send the call to prefix 2 and so on. The problem I have is cr module detects that this host (public vendor ip) was already used and I am getting this warning: NOTICE: carrierroute [cr_func.c:324]: cr_uri_already_used(): Candidate destination This machine use public DNS and I tried to set up 3 entries in /etc/hosts public_iP vendor_1 public_iP vendor_2 public_iP vendor_3 and instead of using the IP in rewrite_host I changed to the name: vendor_1, vendor_2. vendor_3 but I got error: ERROR: tm [ut.h:337]: uri2dst2(): failed to resolve "vendor_1" Is there a better war to resolve this Thank you in advance

2 2

Error configuring kamailio with sql.
by Satish Verma 14 Apr '15

14 Apr '15

Respected sir, I want to configure SIP voip server using tutorial ( http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour). i have configured everything on my ubuntu server as given in tutorial. but i am getting error while running start command ( /etc/init.d/kamailio start) the error as given below. root@wifi:/etc/kamailio# /etc/init.d/kamailio start * Not starting Kamailio SIP Server: invalid configuration file! * * 0(32729) INFO: tls [tls_init.c:401]: init_tls_compression(): tls: init_tls: disabling compression... 0(32729) ERROR: <core> [cfg.y:3288]: yyparse(): cfg. parser: failed to find command force_rtp_proxy (params 0) 0(32729) : <core> [cfg.y:3428]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 729, column 19: unknown command, missing loadmodule? 0(32729) ERROR: <core> [cfg.y:3288]: yyparse(): cfg. parser: failed to find command force_rtp_proxy (params 0) 0(32729) : <core> [cfg.y:3428]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 806, column 19: unknown command, missing loadmodule? ERROR: bad config file (2 errors) i have tried running using default kamailio.cfg then it works fine. but i want to configure using script uploaded by u. please do the needful. i will be very thankful to you. With regards, Satish verma, Programming Assistant, UIET, Panjab University, Chandigarh. Mobile no +917307737732

3 2

Re: [SR-Users] CDR fields are all strings
by Mickael Marrache 14 Apr '15

14 Apr '15

I created a pull request that I tested using MongoDB. It works fine. Let me know if I can help more. Mickael From: Mickael Marrache [mailto:mickaelmarrache@gmail.com] Sent: Monday, April 13, 2015 5:13 PM To: miconda(a)gmail.com; 'Kamailio (SER) - Users Mailing List' Subject: RE: [SR-Users] CDR fields are all strings We are using MongoDB and all the values are inserted as strings. I also tried using the time_mode and time_format parameters, but it looks like they are only relevant for transactions accounting. Regarding the duration, it is set as a string for any backend. I think this behavior strongly limits us (and probably others) performing queries on CDRs (especially queries based on start and end time). Mickael From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Daniel-Constantin Mierla Sent: Monday, April 13, 2015 3:03 PM To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] CDR fields are all strings Hello, On 13/04/15 11:48, Mickael Marrache wrote: Hi, Why are all the CDR fields inserted as strings? For extra fields, I can understand it is easier to implement. However, for the built in fields (e.g. duration), we need to perform queries based on duration and time and it is not really possible using strings. Dialog variables hold only strings and those values are stored in variables, iirc -- that was the design behind the concept done by initial developer. Perhaps they can be easily updated to hold integers. Anyhow, iirc, at least with mysql it should work to insert any value enclosed in quotes, not matter the field type. For datetime that is acutually the default -- to use quotes, afaik. So if you change the types of columns, it should just work. We can push a patch if most of the people think is better to use different column types. Cheers, Daniel I see that the time field for failed transactions is inserted as a date. -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, May 27-29, 2015 Berlin, Germany - http://www.kamailioworld.com

2 1

Playing with presence module and offline AoR
by Roberto Fichera 14 Apr '15

14 Apr '15

Hi All, I've started to play with presence module on kamailo 4.1.6, everything seems to work quite well up to now except one thing. I would like to notify the presence status of a NOT currently registered AoR as not online instead of not present. How can I do that? Thanks in advance, Roberto Fichera.

1 0

← Newer
1
...
6
7
8
9
10
11
12
...
15
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2015