sr-users March 2015

sr-users@lists.kamailio.org

88 participants
149 discussions

Regarding multi user chat in Kamailio IMS server

by MadhuManjushaAripirala

Hello all, I have RCS based client. I would like to implement MUC(multi chat user) in existing Kamailio IMS Server. Please help me to input the procedure.Is it really possible to do it ? Please share me URL for any existing "C" source code which I can directly imbibe into Kamailio IMS serve -- View this message in context: http://sip-router.1086192.n5.nabble.com/Regarding-multi-user-chat-in-Kamail… Sent from the Users mailing list archive at Nabble.com.

9 years

Regarding IMS/RCS complaint clients for Kamailio IMS/RCS server

by MadhuManjushaAripirala

Hello, Please let me know 1.What are the IMS and RCS based clients available to test on Kamailio IMS/RCS server? 2.On browsing for Kamailio Installation,I found below 3 different links,please suggest me which one to be followed. https://loadmultiplier.com/node/76 http://www.kamailio.org/wiki/tutorials/ims/installation-howto http://kamailio.org/wiki/install/4.2.x/git 3.From the first link above,I see there are separate steps mentioned to install CSCF nodes and HSS but where I find no information for setting up RCS AS(application server) module.Please let me know on this. Thanks & Regards, Manjusha. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Regarding-IMS-RCS-complaint-clients… Sent from the Users mailing list archive at Nabble.com.

9 years

Kamailio coredump when "INVITE" enter in failure route

by José Seabra

Hi there, I have noticed that my kamailio proxy, version 4.2.2 is originating core dumps. This happens when Kamailio receives an INVITE in failure route, then execute the function async_sleep(3), after that changes request uri, then it stops with following error message shown below: <core> [mem/f_malloc.c:586]: fm_free(): BUG: fm_free: bad pointer 0x7f8d26605ed8 (out of memory block!), called from <core>: parser/msg_parser.c: set_path_vector(822) - aborting Please see the attachment that contains the " gdb bt full" from core.dump originated Thank you for your attention Best Regards -- Cumprimentos José Seabra

9 years

Planning to release Kamailio v4.2.4

by Daniel-Constantin Mierla

Hello, I am considering to release a new maintenance version from latest stable branch - to be v4.2.4 - next week, most likely on Thursday, April 2. If there is anything important to get in and not discussed yet, bring the topic on development mailing list. Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio World Conference, May 27-29, 2015 Berlin, Germany - http://www.kamailioworld.com

9 years

Recommendation for toggling MSILO m_store auto-notification reply on/off

by Anthony Messina

Using Kamailio 4.2-dev and MSILO, is it possible to "toggle" the auto- notification reply MESSAGE using something similar to the following where "$var(msilo_reply)" is emtpy at startup (or are there suggestions for a better method): modparam("msilo", "from_address", "$var(msilo_reply)") ... if(CONDITION WHERE I WANT THE AUTO-REPLY RETURNS POSITIVE) { $var(msilo_reply)="$rU(a)example.net"; } m_store($rU) ... My use case is that I would like the auto-notification reply to occur in some instances, but not others. I also do not want to create a loop where the auto-notification replies are also stored. I was originally using a simple test: if(src_ip!=myself), but I have begun to use the IMC module as well as the EXEC module and these MESSAGEs appear to originate from "myself." Looking at the MSILO documentation I see there is "extra_hdrs(string)," but this appears to be designed to add headers to dumped MESSAGEs. I was hoping there would be a way to add a custom header to the auto-notification, on which I could filter/drop generated replies earlier in the route, but it doesn't appear that this exists. My preference for the best-case scenario would be to control the generation of the auto-notification reply in the first place rather than having to add a control to detect the reply and drop it. Thanks in advance for any recommendations. -- Anthony - https://messinet.com/ - https://messinet.com/~amessina/gallery 8F89 5E72 8DF0 BCF0 10BE 9967 92DC 35DC B001 4A4E

9 years

Nonce lifetime in RADIUS auth module

by Måns Nilsson

Hi, I have a problem with stale nonces being reused by a UA. I'd like to do two things; * Set the nonce lifetime to a lower value * Handle stale nonces in my authentication route For the first, I'm interpreting the RADIUS module documentation so that it gets such parameters from the generic auth module and, therefore, I should be good with something like: ... modparam("auth", "nonce_expire", 60) # Set nonce_expire to 60s ... For the second, I'd appreciate pointers on how to set stale=true in the 401 reply, if special handling is required. I have incomplete packet traces to work from right now, so can't tell if it is being set already. Thanks, -- Måns Nilsson primary/secondary/besserwisser/machina MN-1334-RIPE +46 705 989668 I'm wearing PAMPERS!!

9 years

htable persistation question

by Attila Megyeri

Hi, We are having problem with persisting htable. There are 4 hashtables defined in kamailio config, like: modparam("htable", "db_url", DBURL) modparam("htable", "htable", "vtp=>size=10;autoexpire=120;dbtable=htable;dbmode=1;") modparam("htable", "htable", "a=>size=6;") modparam("htable", "htable", "rpn=>size=10;autoexpire=0;dbtable=htable;dbmode=1;"); modparam("htable", "htable", "rpnn=>size=10;autoexpire=0;dbtable=htable;dbmode=1;"); The strange behavior is that if I restart kamailio, the hash table is not persisted into the database. If I change e.g. rpn's dbtable to e.g. htable_1 (which should be created in the kamailio mysql database schema upfront, then the rpn hashtable will be presisted successfully at every stop and will be reload at every start. What is wrong in my config? Kamailio version is 4.2.3 Thanks, Attila

9 years

Share location table 3.x 4.x

by Jon Bonilla (Manwe)

Hi all I'm sharing a location table between two kamailio 3.3 and kamailio 4.2 servers. Table versions are 5 and 6 but I don't know how to skip table version checking to prevent one of them from running. Any tips? thanks, Jon

9 years

keep Kamailio running

by Mihaly Zachar

Hi All, As far as I can see if a child dies due to segmentation fault Kamailio stops all the childs and it exits. Is there a possibility to change this behaviour to a kind of "respawn the child" way ? What do you think is the best way to keep Kamailio running on Ubuntu ? On RHEL ? Thanks, Misi

9 years

please help

by mail＠sathees.co.uk

Hi, I’m trying to setup kamailio as proxy to asterisk. Asterisk server running on public IP. I want to hide the asterisk behind kamailio. UAC à Kamailio à Asterisk media services à PSTN PSTN à Asterisk media services à Kamailio à UAC I like to use dispatcher or load balancer modules. I have tried Kamailio 4.0.x and Asterisk 11.3.0 Real time Integration no luck. Can some mail me working scripts or some sort of idea? Appreciate. Sathees

9 years

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2015