sr-users December 2015

sr-users@lists.kamailio.org

70 participants
111 discussions

Kamailio radius authentication prolem
by Volkan Oransoy 07 Dec '15

07 Dec '15

Hi all, I try to authenticate my users via mod_radius, but I have problem. FreeRadius server gives this error: Auth: [digest] Cleartext-Password or Digest-HA1 is required for authentication. I think I need to send those attributes from kamailio but I couldn't figure out how to do it. Here is diff of my config with default config. Thanks, /Volkan ===================== diff /etc/kamailio/kamailio.cfg /etc/kamailio/kamailio.cfg.original < #!define WITH_DEBUG 294,297d292 < … [View More]loadmodule "auth_radius.so" < modparam("auth_radius", "radius_config", "/etc/radiusclient/radiusclient.conf") < loadmodule "avpops.so" < 739,783c734,739 < if (is_method("REGISTER")) < { < avp_print(); < if (!radius_www_authorize("example.com")) { < xlog("SCRIPT: www auth return code: $rc\n"); < switch ($rc) { < case -7: < send_reply("500", "Server Internal Error"); < exit; < case -1: < send_reply("400", "Bad Request"); < exit; < default: < }; < if (defined($avp(digest_challenge)) && < ($avp(digest_challenge) != "")) { < append_to_reply("$avp(digest_challenge)"); < }; < send_reply("401", "Unauthorized"); < exit; < }; < } < < if (from_uri==myself) < { < if (!radius_proxy_authorize("example.com", "$pU")) { # Realm and URI user are taken < switch ($rc) { # from P-Preferred-Identity < case -7: # header field < send_reply("500", "Server Internal Error"); < exit; < case -1: < send_reply("400", "Bad Request"); < exit; < default: < }; < if (defined($avp(digest_challenge)) && < ($avp(digest_challenge) != "")) { < append_to_reply("$avp(digest_challenge)"); < }; < send_reply("407", "Proxy Authentication Required"); < exit; < }; < < } < --- > #!ifdef WITH_IPAUTH > if((!is_method("REGISTER")) && allow_source_address()) { > # source IP allowed > return; > } > #!endif 784a741,753 > if (is_method("REGISTER") || from_uri==myself) > { > # authenticate requests > if (!auth_check("$fd", "subscriber", "1")) { > auth_challenge("$fd", "0"); > exit; > } > # user authenticated - remove auth header > if(!is_method("REGISTER|PUBLISH")) > consume_credentials(); > } > # if caller is not local subscriber, then check if it calls > # a local destination, otherwise deny, not an open relay here [View Less]

2 1

No NOTIFY while PUBLISHing new presence status
by Thierry Luo 07 Dec '15

07 Dec '15

Hi All, I'm now using Kamailio as Presence Server for my IM system. All is fine except that, when one user publishes new presence status (in tuples) to the Presence Server, which does not NOTIFY the subscribers of the status. And the more weird is that, when I restart the subscriber UAs and re-subscribe, the Presence Server send out the NOTIFY messages to the subscribers that just re-subscribed. This is not compliant with RFCs. Anybody please help me out. Attached is the … [View More]

2 2

Table 'kamailio.version' doesn't exist
by Annus Fictus 07 Dec '15

07 Dec '15

Hello List, when I try to create Kamailio Database, I receive this error: *kamdbctl create* MySQL password for root: INFO: test server charset INFO: creating database kamailio ... INFO: granting privileges to database kamailio ... INFO: creating standard tables into kamailio ... ERROR 1146 (42S02) at line 1: Table 'kamailio.version' doesn't exist ERROR: Creating core tables failed at standard! Kamailio version 4.3.4 Any hint? Regards

2 3

UAC dynamic reg_contact_addr()
by Yuriy Gorlichenko 07 Dec '15

07 Dec '15

I have multiple ip addresses at my kamailio. I use uac module for registration to sip providers. I have one provider but want to register form different ip addresses used by my server. When register sends it takes ip address form reg_contact_addr(). But if I want to register from another interface with different ip i need to get to this parametr another ip address. So As I understand it imposibleto do with avp. Does kamailio have some methods to do this?

2 3

why is rtpenengine-delete deleting the whole call?
by Juha Heinanen 05 Dec '15

05 Dec '15

in my test sip proxy parallel forks the invite to two contacts and two rtpengine-offers are made with these kind of call-id and via-branch params: "call-id": "f33a7e21c57edbf3", "via-branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.0" "call-id": "f33a7e21c57edbf3", "via-branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.1", then the via-branch .0 callee answers and rtpengine-answer is sent to with this kind of call-id and via-branch params: "call-id": "f33a7e21c57edbf3", "via-… [View More]branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.0", after that sip proxy deletes the other branch by sending rtpengine-delete with this kind of params: Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] Received command 'delete' from 127.0.0.1:40700 Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] Dump for 'delete' from 127.0.0.1:40700: { "call-id": "f33a7e21c57edbf3", "via-branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.1", "received-from": [ "IP4", "127.0.0.1" ], "from-tag": "3322319973f3909e", "command": "delete" } and rtpengine responds: Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] Response dump for 'delete' to 127.0.0.1:40700: { "created": 1448583951, "last signal": 1448583955, "tags": { "3322319973f3909e": { "tag": "3322319973f3909e", "created": 1448583951, "in dialogue with": "0f6759297b8f1711", "medias": [ { "index": 1, "type": "audio", "protocol": "RTP/AVP", "streams": [ { "local port": 53864, "endpoint": { "family": "IPv4", "address": "192.98.102.10", "port": 10458 }, "advertised endpoint": { "family": "IPv4", "address": "192.98.102.10", "port": 10458 }, "last packet ... Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] ... ": 1448583951, "flags": [ "RTP", "filled" ], "stats": { "packets": 0, "bytes": 0, "errors": 0 } }, { "local port": 53865, "endpoint": { "family": "IPv4", "address": "192.98.102.10", "port": 10459 }, "advertised endpoint": { "family": "IPv4", "address": "192.98.102.10", "port": 10459 }, "last packet": 1448583951, "flags": [ "RTCP", "filled" ], "stats": { "packets": 0, "bytes": 0, "errors": 0 } } ], "flags": [ "initialized", "send", "recv" ] } ] }, "0f6759297b8f1711": { "tag": "0f6759297b8f1711", ... Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] ... "via-branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.0", "created": 1448583951, "in dialogue with": "3322319973f3909e", "medias": [ { "index": 1, "type": "audio", "protocol": "RTP/AVP", "streams": [ { "local port": 53844, "endpoint": { "family": "IPv4", "address": "10.0.2.15", "port": 10144 }, "advertised endpoint": { "family": "IPv4", "address": "10.0.2.15", "port": 10144 }, "last packet": 1448583951, "flags": [ "RTP", "RTCP", "filled" ], "stats": { "packets": 0, "bytes": 0, "errors": 0 ... Nov 27 02:25:55 lohi rtpengine[3792]: [f33a7e21c57edbf3] ... } }, { "local port": 53845, "endpoint": { "family": "IPv6", "address": "::", "port": 0 }, "advertised endpoint": { "family": "IPv6", "address": "::", "port": 0 }, "last packet": 1448583951, "flags": [ "RTCP", "fallback RTCP", "filled" ], "stats": { "packets": 0, "bytes": 0, "errors": 0 } } ], "flags": [ "initialized", "send", "recv", "rtcp-mux" ] } ] } }, "totals": { "RTP": { "packets": 0, "bytes": 0, "errors": 0 }, "RTCP": { "packets": 0, "bytes": 0, "errors": 0 } }, "result": "ok" } which then results in deletion of the whole call, i.e., also the branch that answered. question: why does rtpengine not do what it is asked to do in rtpengine-delete, i,e. delete the offer corresponding to "call-id": "f33a7e21c57edbf3", "via-branch": "z9hG4bK79d6.d19587ffadd9f72bca61d9578eb12bd9.1"? -- juha [View Less]

3 11

Kamailio + Asterisk, same machine, same public IP.
by Douglas Adami 04 Dec '15

04 Dec '15

Hello everyone, I have Kamailio and Asterisk on the same machine with the same public IP. When I try to forward calls to the asterisk (PSTN GW on port 5080), returns the error 401, but does not reach the Asterisk any information. When I switch to an IP out, it works. Any idea? Regards, Doug

2 6

If we print out $fu, $fU & $fd on onsend_route, it prints out incorrect values.
by Jurijs Ivolga 04 Dec '15

04 Dec '15

Hi all, I opened a bug here: https://github.com/kamailio/kamailio/issues/430 But then I was advised to write to mailing list. In nutshell: I'm running Kamailio 4.3.3. When I'm trying to update $ru, $fu & $fd in Kamailio conf: $rU = "1000"; $fu = "sip:something@mydomain.com"; $fd = "newdomain.com"; And later I'm trying to print out $rU, $fu, $fU & $fd in onsend_route: xlog("ALERT: From URI $fu \n"); xlog("ALERT: From domain $fd \n"); xlog("ALERT: From user $fU \n"); … [View More]

2 1

[permissions] allow_source_address_group() always return -1
by Iñaki Baz Castillo 04 Dec '15

04 Dec '15

Hi all, Kamailio 4.3 (Debian Wheezy package) with db_mysql and permissions modules enabled. Once started, this is the cached content of the "address" table: ~# kamctl mi "address_dump" 22 <20, 99.23.86.78, 0> [TEST SERVER] Within the script: ----------------------------- xlog("L_INFO", "request_route() [method:$rm, si:$si, sp:$sp]\n"); $var(group) = allow_source_address_group(); if ($var(group) != -1) { // ALWAYS HERE :( xlog("L_WARN", "invalid source IP [si:$si]\n"); } -------… [View More]

1 2

Re: [SR-Users] About Siremis Login Page Problem
by Daniel-Constantin Mierla 04 Dec '15

04 Dec '15

Hello, do you have the mod_redirect enabled for apache? Can you look at the logs of apache and see if there is any error message? Also, you can look at the logs of siremis in the folder siremis/logs/. Cheers, Daniel On 03/12/15 12:49, Morshed wrote: > > Dear Concern, > > I have installed kamailo and siremis installed properly. But I cannot > login to the siremis, the login page is not loaded successfully. > Please have a look on the attached image and any suggestion from … [View More]

1 0

LCR module : re load_gws uri errors
by Yasin CANER 04 Dec '15

04 Dec '15

3 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2015