sr-users October 2015

sr-users@lists.kamailio.org

77 participants
126 discussions

Siremis debug window
by Infinicalls Infinicalls 08 Oct '15

08 Oct '15

Hi, I have installed Siremis and modified it for public user registration. I have added a new user. When I try to log in it opens up a new (debug) window and prints "1". It doesn't allow me to log in. But I can log in as admin;admin. And siremis/user/register doesn't load properly. It redirects to the login page again. Kindly let me know how do I solve this. regards Ganesh Kumar

2 8

MySQL Connect Errors
by John Billings 08 Oct '15

08 Oct '15

We are using kamailio 4.2.0 with auth_db enabled and connected to a MySQL server. Occasionally, in the middle of the night when there is no activity we get the following errors out of the blue (the last three lines are repeated indefinitely). According to the MySQL site <http://dev.mysql.com/doc/refman/5.0/en/error-lost-connection.html>, this can be caused by a connect timeout that is too short (We verified that Aborted_connects is steadily rising). The kamailio server is right next to the database server so there is no network latency. We increased the db_mysql timeout_interval parameter, but we still see MySQL’s Aborted_connects counter incrementing. So it’s like kamailio is still timing out on connection attempts. Ideas? Thanks. Oct 1 02:34:49 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:34:49 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:34:55 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Lost connection to MySQL server at 'reading authorization packet', system error: 11 Oct 1 02:34:55 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:34:55 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Lost connection to MySQL server at 'reading authorization packet', system error: 11 Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Lost connection to MySQL server at 'reading authorization packet', system error: 11 Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:35:01 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Lost connection to MySQL server at 'reading authorization packet', system error: 11 Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Lost connection to MySQL server at 'reading authorization packet', system error: 11 Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:35:07 sip-proxy1 /usr/sbin/kamailio[9260]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:11 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Host ‘X.X.X.X' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' Oct 1 02:35:11 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: <core> [db_query.c:132]: db_do_query_internal(): error while submitting query Oct 1 02:35:11 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: auth_db [authorize.c:175]: get_ha1(): failed to query database Oct 1 02:35:11 sip-proxy1 /usr/sbin/kamailio[9264]: ERROR: db_mysql [km_dbase.c:123]: db_mysql_submit_query(): driver error on query: Host 'X.X.X.X' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' ...

2 1

TM not ending transactions
by Daniel Tryba 08 Oct '15

08 Oct '15

Running 4.3.x (both .1 and .2) I have seen it happening twice sofar that dialogs (the module) will not end, resulting in to calls failing due to call limits based on active dialogs. Accounting logged a BYE for all these calls. kamcmd tm.stats shows an increasing number of current/waiting transactions (as grphed in attachment). Has anyone seen this problem?

3 7

Questions about LCR
by Scott C. Fertig 08 Oct '15

08 Oct '15

Hello, Sorry to bother and if I sound like a newb thats because I am kind of new (but im trying =) ) I am having some issues getting started using LCR and was wondering if anyone could point me in the right direction and/or let me know what I am doing wrong. I began setting up the other day using kamailio (4.4.0-dev5) from git (maybe I picked the wrong version?) and am struggling to get lcr to work properly. So far I have been able to get the module to load, added the route to the config and have added some LCR values. Inbound calling is working perfectly to a registered device which is great so far. This is my config for the LCR: http://pastebin.com/LUF0Pgr1 I have the following values in my database for LCR: http://pastebin.com/bDpQug0J I was not sure if dumping all the text in the email would be appropriate if needed please let me know to resend with the configs in the email. Whats strange to me is that even with the xlog I do not get any messages to syslog at all, I have defined WITH_DEBUG, debug level at 3, and log facility set to LOG_LOCAL0 (Sorry if I'm bringing up multiple issues) Anyways back on point, I'm wondering if this is related to the avp's listed, I am not sure what the avps referenced are supposed to represent, when I try to dump all the avps I get a empty list, and it is querying the usr_preference table for these. Is there something I need to add within this table, or is there perhaps something wrong with my configuration? [root@localhost kamailio]# kamctl avp list database engine 'MYSQL' loaded Control engine 'FIFO' loaded Query: SELECT uuid,username,domain,attribute,type,value FROM usr_preferences ; Dumping AVPs Thank you!

2 2

Lost 180 Ringing Response
by John Billings 07 Oct '15

07 Oct '15

Hi Everyone, We are using Kamailio 4.2.0 with TLS. It’s setup so multiple phones can register to the same account and they all ring together. It always works great unless one of the phones is on a slower Internet connection. Occasionally that phone will start ringing after another phone has already picked up the call. The problem is that the INVITE to the slow phone is not followed by a CANCEL. So the phone keeps on ringing for a long time. When there is no problem, the logs on the phone show: Receive: INVITE Send: 180 Ringing Received: CANCEL Send: 200 Ok When the phone keeps ringing: Delay: up to several seconds Receive: INVITE Send: 180 Ringing The problem never seems to happen if I wait until all of the phones have received the INVITE. So is the late 180 response not getting handled by the right session? Any ideas on how to track this down?

2 1

Re: [SR-Users] uac_req_send and reply timeout
by Paweł Sternal 07 Oct '15

07 Oct '15

On 07.10.2015 16:41, Daniel-Constantin Mierla wrote: > Hello, > > in the event route for uac_req_send() is practically during handling the > reply for what was sent before. Also, the uac_req_send() sends something > out of the processed sip message, so typically functions won't work > because they will be applied to the processed sip message. > > Maybe try setting the avp with the timeout value (see tm parameters), > might work, I haven't checked -- report the results, would be good to know. Unfortunately solution with fr_timer_avp also doesn't work. Only set globally fr_timer works. Well... there is always a solution. Thanks anyway. > Cheers, > Daniel Regards, Paweł

2 1

uac_req_send and reply timeout
by Paweł Sternal 07 Oct '15

07 Oct '15

Hi, It is posibility to set timeout for uac_req_send with setting "evroute" to 1. Yes, I found a solution without this set when using event_route[tm:local-request] [1] but with "evroute" option this don't work ofcorse. regards Pawel [1] http://lists.sip-router.org/pipermail/sr-users/2011-October/070695.html

2 1

SIREMIS Help
by Vojimir Raovic 07 Oct '15

07 Oct '15

Hi, Just wanted to see how to get SIREMIS user manaual? Regards, Voyimir [image: me]*Vojimir Raovic*, Principal Engineer & Co-founder *Office:* +61 8 9200 3500 | *Web:* www.norwoodsystems.com | *Twitter: * @norwoodsystems <http://twitter.com/norwoodsystems> *Direct:* +61 8 9200 3503 | *Mobile:* +61 450 019 775 [image: me][image: me] [image: me] NOTICE: If you are not an authorised recipient of this e-mail, please contact Norwood Systems immediately by return e-mail or by telephone on +61 8 9200 3500. In this case, you should not read, print, re-transmit, store or act in reliance on this e-mail or any attachments, and should destroy all copies of them. This e-mail and any attachments are confidential and may contain legally privileged information and/or copyright material of Norwood Systems or third parties. You should only re-transmit, distribute or commercialise the material if you are authorised to do so. Any legal privilege attaching to the contents of this e-mail or any attachments is expressly reserved and is not waived by any transmission to an unauthorised recipient. This notice should not be removed. *Please consider the environment before printing this e-mail.*

2 1

Recall: Kamailio B2BUA or Dual router ?
by Mark Henriksen 07 Oct '15

07 Oct '15

Mark Henriksen would like to recall the message, "[SR-Users] Kamailio B2BUA or Dual router ?".

1 0

Kamailio B2BUA or Dual router ?
by Mark Henriksen 07 Oct '15

07 Oct '15

Hello All I have been looking for answers and trying really hard to figure out if I can use Kamailio as a Dual Router (Inbound and Outbound using 2 IPs on 1 Eth "Amazon AWS") I can not seem to find information is this is possible using Kamailio or if am just plain "stupid" and can not read the Wiki well enough J Hope you can help //Mark

2 2

← Newer
1
...
7
8
9
10
11
12
13
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2015