sr-users September 2014

sr-users@lists.kamailio.org

96 participants
170 discussions

mtree README missing params
by Juha Heinanen 05 Sep '14

05 Sep '14

looks like 4.1 and master mtree README is missing these parameters: {"pv_dstid", STR_PARAM, &dstid_param.s}, {"pv_weight", STR_PARAM, &weight_param.s}, {"pv_count", STR_PARAM, &count_param.s}, i didn'd find in the code any use for the last. -- juha

2 1

has "defined" been documented somewhere?
by Juha Heinanen 05 Sep '14

05 Sep '14

defined($avp(foo)) can be used to test if avp $avp(foo) has been defined. i looked through kamailio wiki, but didn't find defined function documented anywhere. -- juha

2 1

ldap returning attributes list
by Virmantas Variakojis 05 Sep '14

05 Sep '14

Hi, I'm trying to fetch attribute list with kamailio ldap_search: ldap_search("ldap://agents/ou=Xxxxx,dc=xxxx,dc=yyyyyy,dc=zz?memberOf?sub?(sAMAccountName=$fU)"); ldap_result("memberOf/$avp(s:ldapmemberof1)"); xlog("L_INFO", "LDAP $fU memberOf = $avp(s:ldapmemberof1)"); if (ldap_result_next()) { xlog("L_INFO", "if loop ldap_result"); ldap_result("memberOf/$avp(s:ldapmemberof2)"); xlog("L_INFO", "LDAP $fU memberOf = $avp(s:ldapmemberof2)"); } There's must be seven returning attributes list of memberOf, but I can only retrieve only one of them (looks like last of seven). First xlog output log into my log file, but if loop didn't start. What I'm doing wrong?

3 2

create loop for REGISTER SEND in Kamailio.cfg
by ANTHONY HESNAUX 05 Sep '14

05 Sep '14

hello everybody, I would like loop in kamailio.cfg because I want register soft phone on all asterisk system so I have this configuration but also if I want add another asterisk system my Kamailio.cfg #!define WITH_ASTERISK #!define WITH_CLUST_AST #!ifdef WITH_ASTERISK asterisk.bindip = "asterisk.home.fr" desc "Asterisk IP Address" asterisk.bindport = "5080" desc "Asterisk Port" kamailio.bindip = « kamailio.home.fr" desc "kamailio IP Address" kamailio.bindport = "5060" desc "Kamailio Port" #!endif #!ifdef WITH_CLUST_AST #!define HOST 2 asterisk1.bindip = "192.168.0.10" desc « Asterisk - 1 - IP Address" asterisk1.bindport = "5080" desc "Asterisk Port" asterisk2.bindip = "192.168.0.20" desc « Asterisk - 2 - IP Address" asterisk2.bindport = "5080" desc "Asterisk Port" #!endif # Forward REGISTER to Asterisk route[REGFWD] { if(!is_method("REGISTER")) { return; } $var(rip) = $sel(cfg_get.asterisk1.bindip); $uac_req(method)="REGISTER"; $uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk1.bindport); $uac_req(furi)="sip:" + $au + "@" + $var(rip); $uac_req(turi)="sip:" + $au + "@" + $var(rip); $uac_req(hdrs)="Contact: <sip:" + $au + "@" + $sel(cfg_get.kamailio.bindip) + ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n"; if($sel(contact.expires) != $null) $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n"; else $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n"; uac_req_send(); $var(rip) = $sel(cfg_get.asterisk2.bindip); $uac_req(method)="REGISTER"; $uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk2.bindport); $uac_req(furi)="sip:" + $au + "@" + $var(rip); $uac_req(turi)="sip:" + $au + "@" + $var(rip); $uac_req(hdrs)="Contact: <sip:" + $au + "@" + $sel(cfg_get.kamailio.bindip) + ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n"; if($sel(contact.expires) != $null) $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n"; else $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n"; uac_req_send(); } #!endif thank you for your help anthony

2 1

Dispatcher algorithm 9 ignores weight=xx attribute
by Alejandro Recarey 05 Sep '14

05 Sep '14

Hi, I have a kamailio with the dispatcher module setup. I use: ds_select_dst("1", "9"); to load balance between 3 gateways. My database looks like this: id setid destination flags priority attrs 5 1 sip:1.1.1.1 0 0 weight=10 8 1 sip:1.1.1.2 0 0 weight=45 9 1 sip:1.1.1.3 0 0 weight=45 As I understand it, most of the calls should be split evenly between gateways 8 and 9, and some calls (around 10%) going to gateway 5. Well, gateway 8 gets 99% of the calls. I am using kamailio 4.1 and I really cannot understand why this is happening. Running ds_list shows me that all gateays and weights are correctly parsed into kamailio. This is the result of my ds_list: SET:: 1 URI:: sip:1.1.1.1 flags=AP priority=0 attrs=weight=10 URI:: sip:1.1.1.2 flags=AP priority=0 attrs=weight=45 URI:: sip:1.1.1.3 flags=AP priority=0 attrs=weight=45 I have tried changing the priority to 100, or to 1 in every gateway, and the result is still the same. I have tried adding ; after the weight parameter, the colon is gone in the ds_list once kamailio parses it. If, keeping the same database, I use ds_select_dst("1", "0") the calls are split evenly across all 3 gateways. This is great, but not what I want, but it at least proves that something is working. Is there anything else I can try? Thanks a lot for the help! Alex

2 1

OT: RTCP logging
by Daniel Tryba 04 Sep '14

04 Sep '14

Slightly offtopic, but for QA reasons I'm interested in logging RTCP reports from peers that send them. It looks like rtpproxy-ng might be used to do this (I'm already using rtpproxy anyway). Is someone already doing this and willing to share some pointers?

3 4

Looking for some help
by Sharan Harkisoon 04 Sep '14

04 Sep '14

I am in need of a Kamailio expert that has some availability for consulting services (remote is fine). Feel free to contact me for details. Thanks, Sharan Harkisoon

2 1

Redirect server vs CANCEL
by Mihaly Zachar 04 Sep '14

04 Sep '14

Hi Gents, We have created a small redirect server using the Lua API to get the destinations. Lets say that it takes some time while the script generates the answer, during this time we got a CANCEL. How we can handle this properly ? As far as I could see the TM module always sends back the answer (302) and after that I get the "CANCEL" in my script. Here is my config: http://pastebin.com/7PyKBJyD Here is my test Lua script: http://pastebin.com/6VXn5y8m Could you please help me what is the best way to handle the CANCEL ? Is it possible to do it properly ? Thanks, Misi

2 1

nat_traversal vs nathelper for mediaproxy
by Satish Patel 04 Sep '14

04 Sep '14

I am planing to implement mediaproxy so which NAT module will be good for media proxy and why? should i use nat_traversal ro nathelper ? I haven't see any example people using nat_traversa. most of example i found on google are based on nathelper so just want to make sure which one i should use and why?

2 1

Shared memory
by Morten Tryfoss 04 Sep '14

04 Sep '14

Hi, I wonder about the difference between “used” and “real used” shared memory in Kamailio. Best regards, Morten Tryfoss

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2014