sr-users October 2014

sr-users@lists.kamailio.org

101 participants
188 discussions

Fwd: ACK not forwarding properly
by Sadique Ali 22 Oct '14

22 Oct '14

---------- Forwarded message ---------- From: Sadique Ali <spalikklpd(a)gmail.com> Date: 21 October 2014 18:55 Subject: ACK not forwarding properly To: sr-users-es(a)lists.sip-router.org hi, i want to forward call from VITELITY to sip TWILIO , by using config file (attached one) call gets connected but end automatically after 33 seconds. i could find some miss configurations in sip packet flow with routing ACK ( attached .pcap ) . Please suggest a solution . -regards

1 0

One sided or no voice issue with websockets
by Kamrul Khan 21 Oct '14

21 Oct '14

Hi, We have a setup with sipml5 to kamailio. It works perfectly within local network. In public network the signaling establishes perfectly, but most of the time we hear no voice, sometimes we hear one sided voice and in rare cases we hear voice from both sides. To fix this issue we configured our nathandler like the below: But, still no luck. Any idea how to fix this? Please HELP!!! modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("nathelper", "nortpproxy_str", "a=sdpmangled:yes\r\n") . . . route { . . if (nat_uac_test("115")) { if(nat_uac_test("64")) force_rport(); } if (method=="REGISTER") { fix_nated_register(); add_rcv_param(); } else { fix_nated_contact(); if(nat_uac_test("64")){ if (!add_contact_alias()) { xlog("L_ERR", "Error aliasing contact <$ct>\n"); sl_send_reply("400", "Bad Request"); exit; } } else { add_rcv_param(); } } } . . onreply_route { if (nat_uac_test(64)) { add_contact_alias(); } . . }

1 0

MSILO module not delivering messages
by aawaise 21 Oct '14

21 Oct '14

I have tried to add msilo module to my kamailio.cfg using the link http://sip-router.1086192.n5.nabble.com/Msilo-not-delivering-message-status… Problem is that messages from a user are received on the server. And they can be seen using siremis. But they are not forwarded when the intended receiver gets online. I have added the outboud_proxy in modparameters of MSILO module #!ifdef WITH_MSILO modparam("msilo", "db_url", "mysql://openser:5mil5My5ql@192.168.1.20/openser") modparam("msilo", "from_address", "sip:$rU@mydomain") modparam("msilo", "contact_hdr", "Contact:<sip:$rU@mydomain>\r\n") modparam("msilo", "content_type_hdr", "Content-Type:text/plain\r\n") modparam("msilo", "offline_message", "User $rU is offline!") modparam ("msilo", "outbound_proxy", "sip:mydomain:6524;transport=tcp") modparam ("msilo", "outbound_proxy", "sip:mydomain") modparam("msilo", "expire_time", 604800) #!endif I have added the code available on the link to my kamailio.cfg. -- View this message in context: http://sip-router.1086192.n5.nabble.com/MSILO-module-not-delivering-message… Sent from the Users mailing list archive at Nabble.com.

2 2

SIP Express Router Contact Header Buffer Overflow
by Kay Montag 21 Oct '14

21 Oct '14

Hi Team, my customer gets the following message. Find attached. I checked the provided link: http://www.iptel.org/ser/sercurity/secalert-002-0_8_10.patch But I get the error: "Page not found" Could you assist me with that issue? Regards Kay Mit freundlichen Grüßen Kay Montag -- avodaq AG, Landsberger Str. 290, D-80687 München Tel.: +49.1803.78 63 78, E-Mail: service(a)avodaq.com First European Cisco Master Unified Communications. Cisco Gold Partner. Cisco Learning Partner. Vorstandsvorsitzender: Andreas Kusch Aufsichtsratsvorsitzender: Klaus Genssen Amtsgericht München, Handelsregister 136037

3 4

Hash Table capacity
by Ricardo Martinez 21 Oct '14

21 Oct '14

Hello list. I have a question about the HTABLE module. Suppose that I have a mysql database with 2 million of records. Is possible to load this table as a hash table compatible with Kamailio!? Hope someone can help me. Thanks, Ricardo Martinez.-

6 15

Handle "MESSAGE" packet
by aawaise 21 Oct '14

21 Oct '14

I want to know how kamailio server handles incoming MESSAGE packets of SIP format ? If a sender sends a MESSAGE packet for receiver, and receiver is offline, how will server handle the packet. Can it hold the packet until the receiver is online and then deliver to receiver ?? -- View this message in context: http://sip-router.1086192.n5.nabble.com/Handle-MESSAGE-packet-tp131509.html Sent from the Users mailing list archive at Nabble.com.

3 4

Re: [SR-Users] kamailio 4.2 ，have some problems when use mysql db
by Daniel-Constantin Mierla 21 Oct '14

21 Oct '14

Are you using 4.1 or 4.2? Because the subject mentioned 4.2 but the version of kamailio is 4.1 Daniel On 20/10/14 11:39, 张顺通 wrote: > -M 12 can not help. all config is same. > > see ka.log in attachment, kamailio version is 4.1.6 > > version: kamailio 4.1.6 (x86_64/linux) 010d57 > > flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, > DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, > DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, > USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES > > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, > MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB > > poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. > > id: 010d57 > > compiled on 16:48:03 Oct 20 2014 with gcc 4.1.2 > > -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

3 13

send remote command to kamailio
by Vik Killa 20 Oct '14

20 Oct '14

Hello, I've installed kamailio from debian repo: deb http://deb.kamailio.org/kamailio wheezy main deb-src http://deb.kamailio.org/kamailio wheezy main I am unable to use any RPC related module though... apt-cache search doesn't show them...I installed every kamailio-* package just to make sure but still no luck. Basically, i just want to reload a hash remotely Locally I can do this with: kamcmd htable.dump freeswitch_ips Do I need to compile/install kamailio from source in order to use an RPC package? Thanks. /V

2 3

parallel forking
by Yuriy Gorlichenko 20 Oct '14

20 Oct '14

Hello. I try to do parallel fork calls to endpoints that have same username and different destination URI. Logic of my script: checking location table for rows with needed account get info from contact at loop for every step check technology (sip or ws) append_branch with existing destination for this account rewrite packet with rtpengine to needed technology forward packets via t_relay sql_query("ca", "select contact from location where username='$tU'", "ra"); xlog("rows: $dbr(ra=>rows) cols: $dbr(ra=>cols)\n"); if($dbr(ra=>rows)>0){ $var(i)=0; while($var(i)<$dbr(ra=>rows)){ xlog("L_INFO","SQL query return contact {$dbr(ra=>[$var(i),0])} for {$tU} at step {$var(i)}\n"); if ($dbr(ra=>[$var(i),0])=~"transport=ws"){ xlog("L_INFO", "This is a Websocket call to endpoint"); sql_pvquery("ca", "select received from location where contact='$dbr(ra=>[$var(i),0])'","$var(recieved)"); xlog("L_INFO","SQL query return recieved {$var(recieved)} for {$tU}\n"); $du=$var(recieved); xlog("L_INFO", "Request going FROM ASTERISK to WS. Destination is {$du}\n"); xlog("L_INFO","Websocket Destination URI is {$var(recieved)} for {$tU}\n"); rtpproxy_manage("froc+SP"); t_on_reply("REPLY_FROM_WS"); append_branch("sip:$tU@$du"); $var(i) = $var(i) + 1; } else { xlog("L_INFO", "This is a classic UDP call to endpoint"); $du="sip:"+$(dbr(ra=>[$var(i),0]){s.select,1,@}); xlog("L_INFO","Classic Destination URI is {$dbr(ra=>[$var(i),0])} for {$tU}\n"); rtpproxy_manage("co"); t_on_reply("MANAGE_CLASSIC_REPLY"); append_branch("sip:$tU@$du"); $var(i) = $var(i) + 1; } #append_branch("sip:$tU@$du"); } } return 1; So it customised schema of standart example seturi("sip:a@example.com"); append_branch("sip:b@example.com"); append_branch("sip:c@example.com"); append_branch("sip:d@example.com"); t_relay(); At my test I have 2 endpoints with WS and UDP phones (at fist step ir WS and 2 step it UDP). when I do these steps (at my script) I see packet at TCP dump and saw that sended only one packet to UDP but body of packet is WS. Then I saw log of kamailio. I see that at second step packet changed body to WS body (so strange because other steps before and after goes for UDP (as at logic of script)) What I need to do for send parallel INVITES to multiple endpoints correctly? Thanks

2 3

回复：Re: kamailio 4.2 ，have some problems when use mysql db
by shuntongzhang 20 Oct '14

20 Oct '14

3 5

← Newer
1
...
7
8
9
10
11
12
13
...
19
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2014