sr-users August 2013

sr-users@lists.kamailio.org

93 participants
177 discussions

Workings of the kamailio dispatcher module
by Grant Bagdasarian 07 Aug '13

07 Aug '13

Hello, Consider the following Kamailio script: route { .... route(DISPATCH); route(RELAY); } route[DISPATCH] { ds_select_domain("1", "8"); return; } Dispatcher Table SetID Destination 1 192.168.1.10 1 192.168.1.11 Algorithm 8 uses the first destination, but if it's not available, it uses the next one. Does the ds_select_domain function send the SIP request to the first destination or is it the responsibility of the RELAY route to do this? I believe it's the latter, according to the documentation. Assuming the above (message is relayed in the RELAY route). When Kamailio can't reach the first destination, how does it internally handle the failover? Because once the SIP request has been relayed to the host, the script doesn't have any instructions anymore.

2 5

kamailio installation on vps server help
by william anderson 06 Aug '13

06 Aug '13

hi, Someone could help me in setup my kamailio vps server? So as to learn how to install it (i am newbie). *Installation is on a VPS server running debian64, so i need to do it all by commands. Any step-by-step guide, or possible to view how you install it on teamviewer is perfect so as to learn how to do it myself in the future. i could donate by paypal funds for this help.(pay help is ok for your time and help) Please contact me. Regards,

2 2

rtpproxy patch for XMLRPC notifications
by Camille Oudot 06 Aug '13

06 Aug '13

Hi All, do someone know how to apply the rtpproxy patch (modules/rtpproxy/test/rtpproxy.patch) on the rtpproxy server source code? The notifications on media inactivity is done through kamailio's XMLRPC interface, and this patch is needed by the rtpproxy server to do so. I fetched the code from git://sippy.git.sourceforge.net/gitroot/sippy/rtpproxy and the patch doesn't apply out of the box: $ patch -p1 -l < ../kamailio/modules/rtpproxy/test/rtpproxy.patch patching file Makefile.am patching file Makefile.in patching file aclocal.m4 patching file config.h.in patching file configure.ac Hunk #1 succeeded at 54 (offset 1 line). Hunk #2 succeeded at 106 (offset 1 line). patching file rtpp_command.c Hunk #2 succeeded at 324 (offset 52 lines). Hunk #3 FAILED at 472. Hunk #4 FAILED at 482. Hunk #5 FAILED at 969. 3 out of 5 hunks FAILED -- saving rejects to file rtpp_command.c.rej patching file rtpp_notify.c patching file rtpp_session.c Hunk #1 succeeded at 42 (offset 1 line). Was this patch designed for an different version of the rtpproxy source code? Cheers, -- Camille

2 3

Where are the updated documents?
by 刘日新 06 Aug '13

06 Aug '13

Hi, all. I has download the updated kamailio with version 4.0, and I has correctly configure and install it with some default functions. It did well. Thanks kamailio. But when I want customize some features like TLS etc, I got stuck, and I google them and I just found some notes on the older version, and which don`t work with kamailio 4.0. I guess there are some official documents based on kamailio 4.0, Are there someone kindly show me where I can find these types of documents? Thanks a lot. Best Regards. liurixin

2 1

Kamailio CDR issue
by Nandini madhu 06 Aug '13

06 Aug '13

Dear All, Greetings, I am working Kamailio (4.0.1) server with GUI package Siremis (4.0) of it. I was successful in get through Calls and SMS features in our VoIP phones using this kamailio sever. And now i am trying to get GUI for my kamailio server with SIREMIS (4.0.0) package. Installation was good as i am getting subscribers list in GUI which are in MySQL database. As it comes accounting section. i am Failed to get the CDR list when the call session between two clients have been done. I gone through Acc module's documentation and followed the following links to set up the accounting in GUI : http://kb.asipto.com/siremis:install40x:accounting. And i read this is description in accounting module documentation : 'Note that CDR generation does not involve any kind of database storage (yet). In order to persist the CDRs into a database you will have to set up an exterior process (i.e., a script living outside of Kamailio) and implement the storage task yourself'. So what does it mean ? should i have to install external process like CDR tool and Freeradius? Or is there any other way to get the CDR related information in GUI using database backend. Please find below my kamailio configuration file. By the way CDR data is logged to syslog fine, but i dont know where is wrong for database backend. Any help will greatly appreciate. Regards, Nandini

3 2

Re: [SR-Users] Siremis showing incorrect expires and received time
by Daniel-Constantin Mierla 06 Aug '13

06 Aug '13

Hello, can you look directly in the database table presentity and see the values there? Are they correct? Cheers, Daniel On 8/5/13 2:44 PM, Premchandiran wrote: > > Hi All, > > In /siremis/ser/presentity_list Expires column and Received Time > column shows incorrect value as (1969-12-31 16:33:33, 1969-12-31 16:33:33) > > though the softphone sent publish request today (05-08-2013) . > > Regards, > > *Prem Chandiran M*** > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

2 2

Siremis showing incorrect expires and received time
by Premchandiran 05 Aug '13

05 Aug '13

Hi All, In /siremis/ser/presentity_list Expires column and Received Time column shows incorrect value as (1969-12-31 16:33:33, 1969-12-31 16:33:33) though the softphone sent publish request today (05-08-2013) . Regards, Prem Chandiran M

1 0

romao.pt Registration
by Francisco Romão 05 Aug '13

05 Aug '13

I apologize, but deleted the account and now I can not access. Could delete the registration of domain, or re-create the account in order to proceed? Thank you Francisco Romão -----Mensagem original----- De: registrar(a)iptel.org [mailto:registrar@iptel.org] Enviada: sexta-feira, 2 de Agosto de 2013 20:01 Para: francisco(a)romao.pt Assunto: Your romao.pt Registration Thank you for registering your domain romao.pt to be hosted on our server. We are reserving the following SIP address for you: sip:fromao@romao.pt To finalize your registration please check the following URL within 24 hours: <http://serweb.iptel.org/user/reg/confirmation.php?nr=69e6316b44829e49560867 13165cbcb2> http://serweb.iptel.org/user/reg/confirmation.php?nr=69e6316b44829e495608671 3165cbcb2 (If you confirm later you will have to re-register.) After confirmation your registration you can login at following addresses: user interface: <http://serweb.iptel.org/user/> http://serweb.iptel.org/user/ administration interface: <http://serweb.iptel.org/admin/> http://serweb.iptel.org/admin/ Here are the details of your account: --------------------------------------------------------------------- Username: fromao(a)romao.pt Password: ******* Email: francisco(a)romao.pt Full Name: Francisco Romão Sip address: sip:fromao@romao.pt (You can always retrieve these via the "Forgot Password" link on the signup page) -- This message is automatically generated by SerWeb.

2 1

Force busy reply
by Jason Sia 04 Aug '13

04 Aug '13

Is it possible to force a busy response to the sip client on failure route?

2 1

Cannot write to file (/var/www/siremis-4.0.0/siremis/Config.xml)
by J Handal M 02 Aug '13

02 Aug '13

Hi All, I am following this tutorial http://127.0.0.1/siremis/install/index.php?step=2 This file is located at /etc/apache2/sites-available/default Not sure about this lineRedirectMatch ^/$ /apache2-default/ <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all # This directive allows us to have apache2's default start page # in /apache2-default/, but still have / go to the right place RedirectMatch ^/$ /apache2-default/ </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> Alias /siremis "/var/www/siremis-4.0.0/siremis" <Directory "/var/www/siremis-4.0.0/siremis"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from all <FilesMatch "\.xml$"> Order deny,allow Deny from all </FilesMatch> <FilesMatch "\.inc$"> Order deny,allow Deny from all </FilesMatch> </Directory> </VirtualHost>

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2013