Hello
Im trying to get xcap service working to be able to download my subscriber
list form the subscriber table. I hope that you could help me with this in
anyway possible
Thank you
--
Kethzer Docteur
Hello,
I would like to relay an INVITE to more than 50 contacts that registered
this AOR. But in my kamailio 4.0.2 it is only possible to fork to 12
branches otherwise it results in the error "Maximum number of branches
exceeded".
Is there any possibility to achieve this from script (e.g. multiple
t_relay)?
I've already looked in TM module but it is using an integer bitset, so I
will have to change the whole module in order to obtain more than 32
branches.
Kind regards
--
*Jan **Gaida*
Ingeniero Desarrollo Software C/ Marconi 3 (PTM)
28760 Tres Cantos
Spain
jan.gaida(a)grupoamper.com | www.grupoamper.com
--
This message and any attachments are intended only for the use of the
individual to whom they are addressed and it may contain information that
is privileged or confidential. If you have received this communication by
mistake, please notify us immediately by e-mail or telephone.The storage,
recording, use or disclosure of this e-mail and its attachments by anyone
other than the intended recipient is strictly prohibited. This message has
been verified using antivirus software; however, the sender is not
responsible for any damage to hardware or software resulting from the
presence of any virus.
Este mensaje y cualquier anexo son exclusivamente para la persona a quien
van dirigidos y pueden contener información privilegiada o confidencial. Si
usted ha recibido esta comunicación por error, le agradecemos notificarlo
de inmediato por esta misma vía o por teléfono. Está prohibida su
retención, grabación, utilización o divulgación con cualquier propósito.
Este mensaje ha sido verificado con software antivirus; sin embargo, el
remitente no se hace responsable en caso de que en éste o en los archivos
adjuntos haya presencia de algún virus que pueda generar daños en los
equipos o programas del destinatario.
Hello,
anyone here having any experience with makeann tool from rtpproxy? If
yes, can you share details of the input audio file (e.g., its format,
sampling, etc.)?
Also, anyone knowing the dependencies to be able to make g729 encodings?
>From the source file is not clear what external lib it depends on.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Hello ... What you are trying todo ... Could only be done un two ways...
Way one : the easier and better... Lets kamailio do their work ... And put it un front of the asterisk servers
Way two: the hardest one
Correctly setup your DNS server. The setup you need for sending out different answers depending con the orig ip its calles 'split hirizont'.
Also you will need a good dns-srv Support on your IP phones ... And Support for failback setup ... Not all models Support that ... I know snom terminals Support that.
Forget about h323 ... Its a dead cat
Best regards
--
Raúl Alexis Betancor Santana
Dimensión Virtual S.L.
Rafael Carvallo <shaoranrch(a)gmail.com> wrote:
>_______________________________________________
>SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>sr-users(a)lists.sip-router.org
>http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
I'm upgrading a 1.5 install to 4.0 and encounter a problem with registrations
from a phone. The phone lost power and after rebooting it starts a new
registration while the old registration hasn't expired yet. The phone uses the
same aor and contact but a different call-id (and cseq) which all seems ok and
used to work with 1.5.x.
Problem 1) When receiving this new registration, kamailio is trying to update
the old registration even though the new registration doesn't match the old
one. The database responds with 0 rows updated because the call-id is
different.
Problem 2) To try to circumvent problem 1, i have usrloc configured to try an
insert instead when the update fails. That insert fails because kamailio is
trying to insert with the same ruid as the old registration.
Combining those, the real problem seems to be that kamailio is assigning the
same ruid to both registrations. How could that be prevented?
The config parameters are set so that it matches my old 1.5 config as much as
possible. No need for outbound, gruu, etc.
(Phone does send an +sip.instance, which happens to be identical in both
registrations. I have gruu_enabled set to 0, so i would expect kamailio to
ignore it as it did in 1.5. The outbound module is not loaded).
modparam("registrar", "min_expires", 60)
modparam("registrar", "default_expires", 1800)
modparam("registrar", "default_q", 0)
modparam("registrar", "path_mode", 0)
modparam("registrar", "use_path", 1)
modparam("registrar", "path_use_received", 1)
modparam("registrar", "gruu_enabled", 0)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "timer_interval", 20)
#modparam("usrloc", "db_obs_ruid", 0) # param does not really exist
modparam("usrloc", "db_check_update", 1)
modparam("usrloc", "timer_procs", 2)
modparam("usrloc", "hash_size", 14)
modparam("usrloc", "matching_mode", 0)
--
Greetings,
Alex Hermann
Hello, I am trying to activate the check blacklist function but I keep getting an error. The script I run is this;
if(!check_blacklist("global_blacklist")){
sl_send_reply("403","Forbidden");
exit;
}
When I restart kamailio I get the following error;
failed to find command check_blacklist
Is there any module I will need to activate to make this work?
Regards,
Arun
After installing Siremis as per the instructions, i get the following error.
Anyone know how to solve this?
"Not able to get the right data table of given form
help.form.HelpWidgetListForm"
After clicking OK I get this:
"Unable to create object from class Openbiz.TableForm. TypeError: table is
undefined"
Every page click invokes this error.