i'm trying to use the example kamailio.cfg to route to voicemail
server on busy or decline.
Only thing I did was adding decline code to t_check_status("486|408"),
enabling the preprocessor variable for voicemail and changing the
voicemail host and port to my voicemail server.
No requests arrive on my voicemail server and the dial tone keeps
ringing even if phone is busy and when I decline on the receiving
phone there's a new INVITE sent to the phone directly afterwards.
Am I doing something wrong here?
Dear All,
I am trying to integrate kamailio 4.0.1 server with Asterisk 11.4.0 in
Ubuntu 12.04 LTS version. I tried it by using the following link :
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb.
But after all, when i tried to start Kmailio server with
/etc/init.d/kamailio start command , i am getting the following errors:
asterisk-kamailio@asterisk-
kamailio:/$ sudo /etc/init.d/kamailio start
[sudo] password for asterisk-kamailio:
/etc/init.d/kamailio: 1: /etc/init.d/kamailio: sed: not found
/etc/init.d/kamailio: 118: /etc/init.d/kamailio: arithmetic expression:
expecting primary: ""
what could be the wrong, and how can i solve it?
Please share your valuable suggestions on this.
Any help will greatly appreciate.
*Thank you and Best regards,*
*R Ravindra **Gowda*
*Engineer - Systems and Products*.
*Thrikasa Technologies*
*| Office: +91 40 23260434
| Mob: +918885284050
*
*| Fax:+91 40 23221045*
*| email: ravindra(a)thrikasa.in*
*| Web: www.thrikasa.in*
'If you don't give up,you cannot fail'.
The information contained in this communication is proprietary to Thrikasa
Technologies., and/or third parties, may contain classified or privileged
information, and is intended only for the use of the intended addressee
thereof. If you are not the intended addressee, please be aware that any
use, disclosure, distribution and/or copying of this communication is
strictly prohibited.If you receive this communication in error, please
notify the sender immediately and delete it from your computer.
Thank you very much for sharing your insights, Barry! I am facing the same
problem that Trevor described:
Things are working just fine on their own, but as soon as FreePBX comes
into play, calling extensions becomes impossible because of the different
tables used. Removing the password from FreePBX (and setting the Kamailio
IP in the ACL field) seems to mitigate the issue somewhat, but even though
the extension shows as registered in FreePBX, it always shows as busy:
chan_sip.c:23237 handle_response_invite: Failed to authenticate on INVITE
to '"xxxxxxxx" <sip:xxxxxxxx@198.23.139.21>;tag=as72a4117a'
-- SIP/1001-00000006 is circuit-busy
I doubt that I can make the necessary modifications even with your hints,
but would be willing to pay for your (or anybody's) time solving the matter
in a way that (a) leaves the FreePBX installation untouched as far as
possible and (b) is easy to apply to subsequent versions. Ideally, it would
be a slight modification of Daniel's excellent tutorial at
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb,
allowing to create extensions in FreePBX. Anybody willing to give it a
shot? Just let me know what you would charge and we can talk about it.
Dear 2.8 users,
this update includes the fixes for kamailio-lb config (multiple
sockets-related):
- added record-route param to store socket; review logic for relaying
in-dialog requests (fallback to default send socket if it's not defined
explicitly); fixed socket selection for ACK after 4xx and replies to
in-dialog requests to callee;
- also file descriptors limit has been lifted for sems.
The upgrade is highly recommended if you run the 2.8 version.
On 06/04/2013 12:16 PM, Sipwise Repository Tracker wrote:
> One or more updates have been released in NGCP release 2.8:
>
> * ngcp-templates-ce-asterisk was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-cdr-exporter was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-check-tools was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-cleanup-tools was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-hylafaxplus was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-hylafaxplus-diva was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-hylafaxplus-iax was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-iaxmodem was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-kamailio was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-lsb was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-mediaproxy-ng was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-mediator was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-mysql was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-nginx was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-odbc was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-reminder was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-sems was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-system was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-ce-vmnotify was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-asterisk was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-callingcard was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-cdr-exporter was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-check-tools was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-cleanup-tools was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-glusterfs was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-ha was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-heartbeat2 was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-hylafaxplus was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-hylafaxplus-diva was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-hylafaxplus-iax was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-iaxmodem was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-kamailio was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-lsb was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-mediaproxy-ng was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-mediator was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-monit was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-monitoring-tools was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-mysql was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-nginx was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-odbc was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-pushd was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-redis was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-reminder was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-sems was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-system was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-vmnotify was updated from version 2.8.6 to version 2.8.7
> * ngcp-templates-pro-voisniff-ng was updated from version 2.8.6 to version 2.8.7
>
> To apply the latest update(s) execute:
>
> apt-get update && apt-get upgrade && \
> ngcp-update-db-schema && ngcp-update-cfg-schema && \
> ngcpcfg apply
>
> If you encounter any problems please report a bug at
> the spce-user(a)lists.sipwise.com mailing list.
>
> Further documentation is available at:
>
> http://www.sipwise.com/products/spce/documentation/
>
> This is an automated mail by the Continuous Delivery platform at Sipwise.com
>
> _______________________________________________
> Spce-user mailing list
> Spce-user(a)lists.sipwise.com
> http://lists.sipwise.com/listinfo/spce-user
>
Hello All,
I'm a bit confused as to how Siremis interacts with Kamailio. From what I understand, the dial-plan is done in the kamailio.cfg with regex statements and requires a restart of the Kamailio process to take effect. How then does Siremis change the dial-plan in Kamailio without writing re-writing the config?
I'm assuming Siremis is merely writing to a MySQL database and some additional code is required in the kamailio.cfg in order to be able to use the dial-plan functionality of Siremis?
What must I change in the kamailio.cfg to be able to use Siremis for dial-plan modification?
Hi,
I am using Kamailio with Postgres and I get this error while using the
load_credentials parameter in the auth_db module. Basically I am loading a
column whose datatype is BIGINT or int8 in postgres. Kamailio shows up with
this error in syslog when authorization is done:
NOTICE: <core> [db_ut.c:485]: unknown field type: 2, setting value to null
And it sets the value of AVP as null.
When I change the datatype to int4 and put a smaller value it works. I
googled a little and figured that kamailio supports bigint, but I still get
this error. I am using Kamailio 4.0.1 to test. Any pointers or directions
that I should look at??
Would really appreciate the response.
Thanks,
--- Jayesh