Hi all
We do have a strange problem with loosing rtp in case of carrierroute - failureroute.
If we send traffic directly to the failure gateway, we do have rtp without any problem
Situation:
Ua --> Freeswitch --> kamailio 3.3 --> gw 1 Error 404 --> failureroute --> media gateway voiceprompt for error 404
==> this does not work
Ua --> Freeswitch --> kamailio 3.3 rewrite to dest for voiceprompt 404 -->media gateway voiceprompt for error 404
==> this works!!
Any idea?
For me it seems being a problem with branching or so.
Regards,
Oli
Configs below:
Main routing block
request_route {
--- do all the checks
route(CARRIERROUTE);
route(RELAY);
}
route[RELAY] {
xlog(, "L_INFO", "RELAY: Outbound sent via $avp(s:trunk_out)");
# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|SUBSCRIBE")) {
t_on_branch("MANAGE_BRANCH");
t_on_reply("MANAGE_REPLY");
xlog(,"L_INFO", "RELAX - Manage branch ...\n");
}
if (is_method("INVITE")) {
t_on_failure("MANAGE_FAILURE");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# carrierroute
route[CARRIERROUTE] {
xlog(,"L_INFO","Carrierroute module start \n");
$avp(s:tree) = "default";
# lookup from user and from domain
cr_user_carrier("$fU", "$avp(s:trunk_in)", "$avp(s:cr_pref_carr)");
if($avp(s:cr_pref_carr) == 0){
# lookup from domain
cr_user_carrier("", "$avp(s:trunk_in)", "$avp(s:cr_pref_carr)");
}
if(!cr_route("$avp(s:cr_pref_carr)", "$avp(s:tree)", "$rU", "$rU", "call_id", "$avp(s:todirection)" )){
xlog("cr_route 403 no route found $avp(s:cr_pref_carr)");
sl_send_reply("403", "Not allowed");
exit;
}
$avp(s:trunk_out) = $avp(s:todirection);
route(ALTERHEADER);
}
failure_route[MANAGE_FAILURE] {
if (t_grep_status("486")){
xlog("L_INFO", "Status 486 - busy");
t_reply("486", "Busy");
}
#revert_uri();
route(NATMANAGE);
if (t_is_canceled()) {
exit;
}
xlog("L_INFO", "failure_route $rd $T_reply_code $avp(s:trunk_in), $avp(s:tree), $rU, $rd, $T_reply_code, $avp(s:tree) \n");
if(!cr_next_domain("$avp(s:cr_pref_carr)", "$avp(s:tree)", "$rU", "$avp(s:trunk_in)", "$T_reply_code", "$avp(s:tree)" )){
xlog("cr_next_domain failed");
exit;
}
if(!cr_route("$avp(s:cr_pref_carr)", "$avp(s:tree)", "$rU", "$rU", "call_id", "$avp(s:todirection)" )){
xlog("cr_route failed");
exit;
}
$avp(s:trunk_out) = $avp(s:todirection);
if (is_method("INVITE"))
{
setflag(FLT_ACC); # do accounting
setflag(FLT_ACCMISSED); # oro 28.10.13
}
route(ALTERHEADER);
t_on_failure("MANAGE_FAILURE");
if (!t_relay()) {
xlog("failureroute t_relay failed");
exit;
}
}
Hi
I am trying to run the Ubuntu nightlies from
http://deb.kamailio.org/kamailiodev-nightly and loading the p-cscf config
files.
Things were working fine while I was on the 20130110 nightlies, but when I
upgraded to 20130122 I get the following errors. Any have an idea why
sem_post is undefined and how to fix this?
0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not
open module </usr/lib64/kamailio/modules/ims_registrar_pcscf.so>:
/usr/lib64/kamailio/modules/ims_registrar_pcscf.so: undefined symbol:
sem_post
0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not
open module </usr/lib64/kamailio/modules/cdp.so>:
/usr/lib64/kamailio/modules/cdp.so: undefined symbol: sem_post
0(1980) ERROR: <core> [sr_module.c:572]: ERROR: load_module: could not
open module </usr/lib64/kamailio/modules/ims_qos.so>:
/usr/lib64/kamailio/modules/ims_qos.so: undefined symbol: sem_post
Thanks
-Barry Flanagan
Hello List.
The last weekend our kamailio process crashed with this error :
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10661]: : <core>
[pass_fd.c:293]: ERROR: receive_fd: EOF on 29
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: ALERT: <core>
[main.c:751]: child process 10601 exited by a signal 11
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: ALERT: <core>
[main.c:754]: core was generated
Jun 24 06:55:08 pxh /usr/local/sbin/kamailio[10542]: INFO: <core>
[main.c:766]: INFO: terminating due to SIGCHLD
Can someone tell me what seems to be the problem here?
We’re using :
version: kamailio 3.2.2 (x86_64/linux) 98ba92-dirty
flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC,
DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE,
USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES
ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: 98ba92 -dirty
compiled on 12:45:36 Feb 2 2012 with gcc 4.4.6
And this is the bt full from gdb
Core was generated by `/usr/local/sbin/kamailio -m 1024'.
Program terminated with signal 11, Segmentation fault.
#0 mi_profile_list (cmd_tree=<value optimized out>, param=<value optimized
out>) at dlg_profile.c:789
789 if ( mi_print_dlg( rpl,
ph->dlg, 0)!=0 )
Missing separate debuginfos, use: debuginfo-install
filesystem-2.4.30-2.1.el6.x86_64 glibc-2.12-1.25.el6_1.3.x86_64
keyutils-libs-1.4-1.el6.x86_64 krb5-libs-1.9-9.el6_1.2.x86_64
libcom_err-1.41.12-7.el6.x86_64 libselinux-2.0.94-5.el6.x86_64
mysql-libs-5.1.52-1.el6_0.1.x86_64 nss-softokn-freebl-3.12.7-1.1.el6.x86_64
openssl-1.0.0-20.el6_2.1.x86_64 pcre-7.8-3.1.el6.x86_64
zlib-1.2.3-26.el6.x86_64
(gdb) bt full
#0 mi_profile_list (cmd_tree=<value optimized out>, param=<value optimized
out>) at dlg_profile.c:789
node = <value optimized out>
rpl_tree = 0x20a6790
rpl = 0x20a67b0
profile = 0x7fe99a2dda00
ph = 0x0
profile_name = <value optimized out>
value = <value optimized out>
i = <value optimized out>
#1 0x00007fe9dce287b1 in run_mi_cmd (fifo_stream=<value optimized out>) at
../../lib/kmi/mi.h:77
No locals.
#2 mi_fifo_server (fifo_stream=<value optimized out>) at fifo_fnc.c:509
mi_cmd = 0x208f8f0
mi_rpl = <value optimized out>
hdl = 0x0
line_len = 41
file_sep = 0x2039017 ""
command = 0x7fe9dfdbdef9 "profile_list_dlgs"
file = 0x7fe9dfd98d78 "/tmp/openser_receiver_27809"
f = 0x2039018
reply_stream = 0x20b0980
#3 0x00007fe9dce2a640 in fifo_process (rank=<value optimized out>) at
mi_fifo.c:247
fifo_stream = 0x209a0b0
#4 0x00007fe9dce2a9de in mi_child_init (rank=0) at mi_fifo.c:211
pid = <value optimized out>
#5 0x00000000004dba41 in init_mod_child (m=0x7fe9dfc6ba10, rank=0) at
sr_module.c:886
No locals.
#6 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6bd08, rank=0) at
sr_module.c:883
No locals.
#7 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6c248, rank=0) at
sr_module.c:883
No locals.
#8 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6c748, rank=0) at
sr_module.c:883
No locals.
#9 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6d288, rank=0) at
sr_module.c:883
No locals.
#10 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6d928, rank=0) at
sr_module.c:883
No locals.
#11 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6dee0, rank=0) at
sr_module.c:883
No locals.
#12 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e1f0, rank=0) at
sr_module.c:883
No locals.
#13 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e5d0, rank=0) at
sr_module.c:883
No locals.
#14 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6e830, rank=0) at
sr_module.c:883
No locals.
#15 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6ebd0, rank=0) at
sr_module.c:883
No locals.
#16 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6f220, rank=0) at
sr_module.c:883
No locals.
#17 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6f648, rank=0) at
sr_module.c:883
No locals.
#18 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6fa60, rank=0) at
sr_module.c:883
No locals.
#19 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc6fe40, rank=0) at
sr_module.c:883
No locals.
#20 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc702c0, rank=0) at
sr_module.c:883
No locals.
#21 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc70ae8, rank=0) at
sr_module.c:883
No locals.
---Type <return> to continue, or q <return> to quit---
#22 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc70e18, rank=0) at
sr_module.c:883
No locals.
#23 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc71100, rank=0) at
sr_module.c:883
No locals.
#24 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc716c0, rank=0) at
sr_module.c:883
No locals.
#25 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc71df0, rank=0) at
sr_module.c:883
No locals.
#26 0x00000000004db9c4 in init_mod_child (m=0x7fe9dfc723c0, rank=0) at
sr_module.c:883
No locals.
#27 0x000000000046077d in main_loop () at main.c:1661
i = <value optimized out>
pid = <value optimized out>
si = 0x0
si_desc = "udp receiver child=15 sock=64.76.154.35:5060", '\000'
<repeats 20 times>, "\003", '\000' <repeats 15 times>,
"\030\325\a\232\351\177\000\000\001\000\000\000\002", '\000' <repeats 11
times>,
"\001\000\000\000\000\000\000\000\003\000\000\000\000\000\000\000)\000\000\000\000\000\000"
#28 0x0000000000461f13 in main (argc=<value optimized out>,
argv=0x7fff2f2b2848) at main.c:2475
cfg_stream = <value optimized out>
c = <value optimized out>
r = <value optimized out>
tmp = 0x7fff2f2b3f76 ""
tmp_len = 0
options = 0x5a3178
":f:cm:M:dVhEb:l:L:n:vrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:"
ret = -1
seed = 1850310455
rfd = <value optimized out>
debug_save = <value optimized out>
debug_flag = <value optimized out>
dont_fork_cnt = <value optimized out>
n_lst = <value optimized out>
p = <value optimized out>
(gdb)
Regards,
Ricardo.-
Hi, please help me out with these questions:
Is it possible to configure kamailio to use different certificates, one per peer? Do we just add them to the same "calist.pem" file?
Is is possible to configure kamailio to accept a certificate from another device? I mean instead of Kamailio creating the certificate/key and give it to customer/provider. If that is the case, do we also add it to the "calist.pem" file as well?
If all the above is true, what happens when the certificates have different expiration dates?
thank you very much
Hi, all
This is related to the previous tls.reload not safe email chain. Now we
have a detailed gdb output that shows the stack trace of the core dump.
Please take a look. This looks like a bug. Please let me know if you have
any insights on how to fix this. Thanks,
Ding
Hello,
we are preparing for a new VUC session to give an update about Kamailio
project - a perfect timing as we are just about to release a new major
version.
We will like to get many developers involved to be able to highlight
properly what is new, especially those that did new development for v4.1
- new modules or enhancement to existing modules. However, any developer
and community member is welcome to join, we will appreciate it very
much, in support of the project.
Those that have a google hangout account can participate with video,
otherwise there are options to join via sip or pstn audio calls - you
can see more details at:
- http://vuc.me
The number of participants with video is limited, therefore if you plan
to do it, let me know to be able to coordinate and send you the invite
link when the session starts.
No matter you participate with audio/video, you can join the IRC channel
#vuc on freenode.net for text chatting during the event.
I made quickly a news about the event:
- http://www.kamailio.org/w/2013/10/kamailio-update-on-vuc-nov-15-2013/
I will add names of other participants as I get confirmations. Do
suggest topics to highlight/discuss there as well.
Cheers,
Daniel
--
Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
Which variables I can use in
event_route[sl:local-response] route to xlog
proto:ip:port to which the response will be
sent?
event_route[sl:local-response] {
xlog("L_INFO","Local response to
*$??*\n$mb\n");
}
Hi,
Following this issue, and the issue "BYE dialog timeout bad syntax" from
Julia.
I have 2 kamailio servers. srv1 creates a dlg_timeout BYE and sends it to
srv2 that forwards the BYE to the next sip server (some other server...).
I can definitely see that the BYE that is being forward is malformed. The
TO header info is not complete (the port section for example).
When a "normal" bye is received from srv1 (not dlg_timeout) all works fine.
One thing that i do in this scenario, on srv2 i use uac_replace() on the TO
header. So, it is OK that the final destination is different (i do
translations).
I attached the BYE from both servers.
Any ideas?
Thanks,
Uri
You probably meant the To and From headers, I'm guessing. Yeah, as long as
there is no display name component, URIs in headers like that don't have to
go in <>s. The way Kamailio sends it is grammatically valid, per RFC 3261.
The user agents are at fault for not understanding it correctly. Alex
Balashov <abalashov at
evaristesys.com<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
wrote: >*"BYE headers"? Which headers? *>* *>*Uri Shacked <ushacked at
gmail.com <http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>>
wrote: *>* *>>*Hi, *>>* *>>*I think there is a bug with the BYE that is
sent to the caller and *>>*callee *>>*when dialog timeout happends. *>>* *>>
*The BYE headers are sent with no "<" or ">". *>>*So, some sip singaling
points decline the BYE. *>>* *>>*BR, *>>*Uri *>>* *>>*
*>>*------------------------------------------------------------------------
*>>* *>>*_______________________________________________ *>>*SIP Express
Router (SER) and Kamailio (OpenSER) - sr-users mailing *>*list *>>*sr-users
at lists.sip-router.org<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
*>>*http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users *>* *>*--
*>*Sent from my mobile, and thus lacking in the refinement one might *>*expect
from a fully-fledged keyboard. *>* *>*Alex Balashov - Principal *>*Evariste
Systems LLC *>*235 E Ponce de Leon Ave *>*Suite 106 *>*Decatur, GA
30030 *>*United
States *>*Tel: +1-678-954-0670 *>*Web: http://www.evaristesys.com/,
http://www.alexbalashov.com/ *>*
*>*_______________________________________________
*>*SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list *
>*sr-users at lists.sip-router.org<http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>
*>*http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users * -- Sent
from my Nexus 10, with all the figments of autocorrect that might imply.
Alex Balashov - Principal Evariste Systems LLC 235 E Ponce de Leon Ave
Suite 106 Decatur, GA 30030 United States Tel: +1-678-954-0670 Web:
http://www.evaristesys.com/, http://www.alexbalashov.com/ --------------
next part -------------- An HTML attachment was scrubbed... URL: <
http://lists.sip-router.org/pipermail/sr-users/attachments/20130422/0c75272…>
Hi,
I have kamailio server and a freeswitch server during a call the kamailio
passes the call to freeswitch to play a media and back to kamailio for
routing to the destination, this works fine however for samsung devices
(any ROM using linphone). On other device brands, it does not work it
always returns USER_BUSY or NUMBER_NOT_FOUND. After investigation, I found
out that if the transport is UDP then it works on all phones, the problem
happens if I use TCP as the transport. Anyone had experienced on this?
Thanks,
Jason
