sr-users May 2012

sr-users@lists.kamailio.org

84 participants
140 discussions

domain kaobona.com
by Thulani Ngwenya 05 May '12

05 May '12

Hi, I registered my SIP domain kaobona.com to be hosted on iptel.org, how do I get users to register accounts using my domain? Kind regards, Thulani

1 0

pua_reginfo: no Username in PUBLISH message
by Gnaneshwar Gatla 04 May '12

04 May '12

Hello, I was looking at the pua_reginfo to make multiple instances of Kamailio be aware of registered users on the network. I'm experimenting with pua_reginfo with Kamailio 3.2.2. I've used the configuration as described in http://kamailio.org/docs/modules/3.2.x/modules_k/pua_reginfo.html#id2551427 I tried an trial run of the Kamailio instance and it gives the following output PUBLISH sip:@64.64.203.108 SIP/2.0 Via: SIP/2.0/UDP 64.64.203.108;branch=z9hG4bKb62c.b8e3d5b5.0 To: sip:@64.64.203.108 From: sip:@64.64.203.108;tag=533cb9e91f4b999cf76861cbb9ed54ed-e085 CSeq: 10 PUBLISH Call-ID: 17dedfff-14418(a)127.0.0.1 Content-Length: 320 Max-Forwards: 70 Event: reg Expires: 3601 Content-Type: application/reginfo+xml <reginfo xmlns="urn:ietf:params:xml:ns:reginfo" version="0" state="full"> <registration aor="sip:@64.64.203.108" id="0xb6ef7740" state="active"> <contact id="0xb4d1f820" state="active" event="registered" expires="60" callid="ZmRjZDg3MmIxMjI5NmU1OWU0YjJlYWUzYzhjZDViM2I." cseq="2"> <uri>sip:ggatla01@192.168.128.108:23840;rinstance=27b18eed9568795e;transport=udp</uri> </contact> </registration> </reginfo> The PUA module does not insert username in the Request, To and From headers while publishing for Event: reg. The xml payload is right but the "aor" does not have the username. Is there anything missing that I need to configure? Lastly, the presence module in the same Kamailio instance is generating "478 Unresolvable destination" for this message. Regards Gnaneshwar Gatla | InTouch Health | Software Developer 6330 Hollister Ave. Goleta CA, 93117 | P: 805.562.8686 ext: 199

2 2

Kamailio LDAP integration
by Saul Waizer 04 May '12

04 May '12

Hello List, I am trying to incorporate an existing LDAP directory with our Kamailio installation for SIP authentication. A good friend suggested to checkout this tutorial and adapt it to fit my needs (and current version) http://www.kamailio.org/dokuwiki/doku.php/tutorials:openser-auth-ldap It seems like the AUTH module does not contain the function username_spec (which I believe is not used anymore) but the username_avp_spec which is not part of the AUTH module but the H350 module http://kamailio.org/docs/modules/3.2.x/modules_k/h350.html I enabled the h350 module and tried setting the params as described in the documentation: modparam("auth", "username_spec", "$avp(s:username)") modparam("auth", "password_spec", "$avp(s:password)") modparam("auth", "calculate_ha1", 1) I got the following error after checking the configuration: ERROR: <core> [modparam.c:151]: set_mod_param_regex: parameter <username_spec> not found in module <auth> I am running kamailio 3.2.3 (i386/linux) Ubuntu Thank you in advance!

2 3

sdp parsing error
by RUSHI NAYAK 04 May '12

04 May '12

for the following sdp content i'm getting error. v=0 o=rushi 602301 603670 IN IP4 192.168.1.125 s=- c=IN IPV4 192.168.1.125 t=0 0 m=audio 8192 RTP/AVP 5 0 3 can you give correction or sample sdp string.

2 1

Sending NOTIFY using t_uac_dlg over xmlrpc
by Krishna Kurapati 04 May '12

04 May '12

Hi, I was able to send MESSAGE using xmlrpc (mi and t_uac_dlg) I got the 200 OK response to the message. However, when I try to send NOTIFY, I receive HTTP response but with empty methodResponse. Is NOTIFY not suppored by t_uac_dlg? Thanks Krish Kura POST /RPC2 HTTP/1.0 User-Agent: ruby-sip-client Host: 10.1.0.6 Content-Type: text/xml Connection: keep-alive Content-Length: 650 <?xml version="1.0" ?><methodCall><methodName>mi</methodName><params><param><value><string>t_uac_dlg</string></value></param><param><value><string>NOTIFY</string></value></param><param><value><string> sip:kkurapati_staff_test@10.1.0.6</string></value></param><param><value><string>.</string></value></param><param><value><string>.</string></value></param><param><value><string>From: <sip:kkurapati_provider_test@10.1.0.6> To: <sip:kkurapati_staff_test@10.1.0.6> Max-Forwards: 70 Call-ID: e3f15b5dc200234cff2c7b648d79c49f(a)10.1.0.3 </string></value></param><param><value><string>User added</string></value></param></params></methodCall> ## T 2012/04/27 14:39:11.579281 10.1.0.6:5060 -> 10.1.0.3:44817 [AP] HTTP/1.0 200 OK. Via: SIP/2.0/TCP 10.1.0.3:44817. Server: kamailio (3.3.0-dev7 (x86_64/linux)). Content-Length: 137. . <?xml version="1.0"?> <methodResponse> <params> <param> <value><array><data> </data></array></value> </param> </params> </methodResponse>

2 3

sdpops kamailio ans Siremis
by Grégoire Vandendeurpel 04 May '12

04 May '12

Hi, I'm using Siremis 3.2 ans Kamailio 3.2.3 for my final project of my bachloor degree I would like to know how Siremis and Kamailio work together? Like: If I decide to set a protocol in the acl trusted in Siremis like TLS, ok, it works well !! But I need to know the different links between siremis and kamailio to working well.. Why? Cause I need to implement in Siremis a filter form on the sdpops module, and it has to work well of course with the database of ser! So.. What are the different steps to do this? - Create new table sdpops in ser - create the form in siremis and view .. - what in kamailio.cfg?? I found this: http://kb.asipto.com/siremis:install32x:new-views OK, but in my case, I need to do that for SDPOPS, which is a module of kamailio, whithout any table and components about! I mean, there is no openser.sdpops in the database of kamailio, so create the table ok.. but what are the columns, datas, to set in ?? cause I tried php gen_meta.php Serdb sdpops ser.acl.sdpops of course it does not work --> no openser.sdpops ...... thx in advance for your help Best regards -- *Grégoire Vandendeurpel, * * * *IT Sector*

2 2

SEMS 1.4.3 released
by Stefan Sayer 04 May '12

04 May '12

Hello, the SIP Express Media Server project happily announces the availability of the SEMS 1.4.3 release. This is a SEMS 1.4 series bugfix release and should be a drop-in replacement to 1.4 installations. For details of the changes see the changelog at http://ftp.iptel.org/pub/sems/1.4/1.4.3/CHANGELOG Please find sources at http://ftp.iptel.org/pub/sems/sems-1.4.3.tar.gz binary packages in the usual locations soon, and all documentation and links at http://iptel.org/sems If you are using custom applications which create outbound calls, please specifically test the behavior with the commit 26fdaa8e b/f: stopping failed outbound calls Many thanks to everyone who contributed with issue reports and patches! Best Regards Stefan Sayer SEMS - E stands for Express!

1 0

Need Help please
by Rudi Kusnaka 04 May '12

04 May '12

Hello there, I've installing the Siremis 3.2 on a linux that installed Kamailio 3.2. When i'll try to access everything in SER Menu, i'm getting a error messages that tell me about the table in OPENSER database is missing or can't located. But this is a fresh installed Siremis system. Where i can found the openser database stucture so i can build them again? Best Regards, Rudi Kusnaka

2 1

Siremis on Mysql and Kamailio on Postgresql
by Jonny Klompas 04 May '12

04 May '12

I've setup a siremis installation using Mysql for the siremis tables. Kamailio is installed with postgresql on another machine. I selected Postgresql in seremis setup under SIP DB and correctly inserted the right username/password/host. Connection was successful. I can login to Siremis (ver 3.2.0) and access the Admin menu successfully. However when I access the Ser Menu, all the options give errors: For example, trying to to select Server Services, Domain List gives the following errors: [2012-04-05 18:11:36 (GMT)] An exception occurred while executing this script: Error message: #256, Unable to location template file system_internal_error.tpl. Script name and line number of error: /usr/local/siremis-3.2.0/openbiz/bin/Resource.php:283 *function:* errorHandler ( 256, "Unable to location template file system_internal_error.tpl.", "/usr/local/siremis-3.2.0/openbiz/bin/Resource.php", 283, Array(11) ) @ /usr/local/siremis-3.2.0/openbiz/bin/sysheader.inc 117 *function:* userErrorHandler ( 256, "Unable to location template file system_internal_error.tpl.", "/usr/local/siremis-3.2.0/openbiz/bin/Resource.php", 283, Array(11) ) @ *function:* trigger_error ( "Unable to location template file system_internal_error.tpl.", 256 ) @ /usr/local/siremis-3.2.0/openbiz/bin/Resource.php 283 *function:* getTplFileWithPath ( "system_internal_error.tpl", "email" ) @ /usr/local/siremis-3.2.0/openbiz/bin/BizSystem.php 544 *function:* getTplFileWithPath ( "system_internal_error.tpl", "email" ) @ /usr/local/siremis-3.2.0/siremis/modules/service/userEmailService.php 108 *function:* SystemInternalErrorEmail ( Array(2), Null ) @ /usr/local/siremis-3.2.0/siremis/modules/common/form/ErrorForm.php 34 *function:* Report ( ) @ /usr/local/siremis-3.2.0/openbiz/bin/BizController.php 310 *function:* invoke ( ) @ /usr/local/siremis-3.2.0/openbiz/bin/BizController.php 110 *function:* dispatchRequest ( ) @ /usr/local/siremis-3.2.0/openbiz/bin/BizController.php 32 *function:* include_once ( "/usr/local/siremis-3.2.0/openbiz/bin/BizController.php" ) @ /usr/local/siremis-3.2.0/siremis/bin/controller.php 6 ------------------------------ * * Similarly. the all the other optiones under the Ser Menu give errors. My Config.xml (passwords and IPs modified) follows: <?xml version="1.0" standalone="no"?> <Config> <DataSource> <Database Name="Default" Driver="Pdo_Mysql" Server="localhost" Port="3306" DB Name="siremis" User="siremis" Password="siremisrw" Charset="utf8"/> <Database Name="Serdb" Driver="Pdo_Pgsql" Server="x.x.x.x" Port="5432" DBName="dbname" User="dbuser" Password="123456" Charset="utf8"/> </DataSource> </Config> Please advise. Many thanks Jonny * *

4 11

Siremis upload file
by Jesús Pérez Rubio 03 May '12

03 May '12

Hi, I have a problem making some changes on siremis front-end everything was ok except when I try to add a field to upload a file I got this error: #2, fopen(ejemplo.csv): failed to open stream: No such file or directory could anybody help me please? :) Mi configuration: DO: <BizField Name="batch_file" Column="batch_file" Length="64" Required="N" Type="Blob"/> Insert: <Element Name="fld_batch_file" Class="File" FieldName="batch_file" Label="File (.csv)" AllowURLParam="N"/> .php: public function InsertRecord($recArr) { return parent::InsertRecord($recArr); } SQL: mysql> desc batch_provision; +------------+---------+------+-----+---------+----------------+ | Field | Type | Null | Key | Default | Extra | +------------+---------+------+-----+---------+----------------+ | id | int(11) | NO | PRI | NULL | auto_increment | | batch_file | blob | YES | | NULL | | +------------+---------+------+-----+---------+----------------+ 2 rows in set (0.02 sec) Thanks in advance. -- Jesús Pérez VoIP Engineer at Quobis Fixed: +34 902 999 465 Site: http://www.quobis.com

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2012