sr-users February 2012

sr-users@lists.kamailio.org

79 participants
139 discussions

OT: Sipwise raises Series A round for Kamailio-based soft-switch

by Andreas Granig

Hey guys, We're thrilled to announce that we closed our Series A financing round for our Kamailio-based soft-switch: http://www.sipwise.com/news/sipwise_series_a/ We're desperately looking for Voip engineers with good skills in SIP, Kamailio and/or Sems, so if you're interested in improving our open-source solution based on Kamailio, Sems, Asterisk etc, please contact me! Best regards, Andreas

12 years, 11 months

Detection of broken TCP connections to clients

by Yufei Tao

Hi When clients register to Kamailio over TCP/TLS, if I set tcp_connection_lifetime to be quite small, like 30 seconds, and let clients send refreshes every 20 seconds, for example. When client crashes or have network problems, the TCP connection with Kamailio will be closed by the server after 30 seconds of being idle. My question is, is there a way of letting Kamailio tell which user the broken TCP connection belongs to, and then remove the user from the location table and update presence information etc? The reason I want this is, if a user publishes its status of being online with expiring time of 1 hour, but then crashed, then the location table entry and presence information of this user would be wrong for the rest of the hour. How do I get around this? I assume server can send periodic OPTION messages but that would be a bit expensive. Thank you very much! Yufei -- Yufei Tao Red Embedded This E-mail and any attachments hereto are strictly confidential and intended solely for the addressee. If you are not the intended addressee please notify the sender by return and delete the message. You must not disclose, forward or copy this E-mail or attachments to any third party without the prior consent of the sender. Red Embedded Design, Company Number 06688253 Registered in England: The Waterfront, Salts Mill Rd, Saltaire, BD17 7EZ

12 years, 11 months

Re: [SR-Users] dialog vars issue

by Daniel-Constantin Mierla

Hello, back on mailing list ... I think I got it -- the acc record is written when 200 ok for invite is sent out, dialog is processing it before. Therefore dialog structure is updated with to-tag from the reply, but the building of acc record is executed using the INVITE request taken from transaction, where is no to-tag (acc internal design). This results in failing getting the dialog, because of to-tag mismatch. I will send a patch soon. Cheers, Daniel On 2/8/12 2:39 PM, Jon Bergli Heier wrote: > Hi, this is a gzipped log from a test call using kamailio 3.2.1. There's some noise in the log from REGISTERs and so on. > The dlg_var I'm setting is pzzid, printed as zid=<value>. > > Thanks, > Jon -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

12 years, 11 months

Howto configure to use SQLITE

by Perazim

I am a new user and am trying to configure kamailio to use SQLITE instead of MYSQL. I see that SQLITE option is rather new and maybe not as documented as MYSQL. I am running on fedora 14 and have installed MYSQL3 from rpms. Kamailio I built from sources because I need the SQLITE support. What kamailio.cfg and kamctlrc parameters do I need to change to do this? I have already set these in kamctlrc: ... ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, DBTEXT, or SQLITE # by default none is loaded # # If you want to setup a database with kamdbctl, you must at least specify # this parameter DBENGINE=SQLITE ## database host DBHOST=localhost ## database name (for ORACLE this is TNS name) # DBNAME=openser ... and ran: kamdbctl create openser and kamctl add user1 password1 successfully. Now, it appears that I need to change kamailio.cfg for SQLITE. Can I simply edit this file substituting SQLITE for MYSQL and loading the SQLITE module? How about this part: ... ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define DBURL "mysql://openser:openserrw@localhost/openser" #!endif ... Will this URL work with SQLITE? Thanks in advance, Perazim

12 years, 11 months

Kamailio Socket

by Reda Aouad

Is this normal on restarting Kamailio ? ERROR: ctl [ctl.c:379]: ERROR: ctl: could not delete unix socket /tmp/kamailio_ctl: Operation not permitted (1) RA

12 years, 11 months

get server parameters from DB when kamailio starts

by Uri Shacked

Hi again... (i do find myself ask many questions these days.... :-)) well, now here is one more: i have 2 kamailio servers that i use in 2 locations. both use the same tables and DBURL. each of my server turns to a number portability (NP) server at its same location. for example, if server 1 has the call, it will turn to NP server 1 with the query, and if the query fails, it will then turn to NP server 2. the kamailio server 2 does the same. but, turns to NP server 2 first and if it fails, to NP server 1. once this is understood.... here is my issue - i want to have 1 generic cfg file for my 2 servers. today, i use the same cfg file, but in server 1 i set it in the cfg to its group, and on server 2 the same but a different group.... i tried to understand how do i get each server to "pull" its group from the DB. something like "what is my group when my IP is X.Y.Z.Q ? i raed the cfg_db module but didn't understand how to set it on my cfg file and on the DB. what is the best way to do what i want? hope i was clear.... BR, thanks to all the guys that help me so far, i appriciate it a lot! Uri

12 years, 11 months

finally, an open alternative to Viber

by Daniel - Lumicall.org

The rise of Viber has, for some people, been a case of `skype, not again!' until now... Lumicall is now in the Android market - and it fully interacts with other SIP products using ENUM and SRV records. Any feedback on this is welcome. Interconnect (Kamailio calling to/from Lumicall users) is based on the idea of federated SIP, it is explained at http://www.lumicall.org for those who want to connect up to it. Please bear in mind: Lumicall supports ICE (RFC 5245) for NAT traversal, it is using the ice4j implementation from the Jitsi community. This makes the SIP packets bigger and often they are too big for the MTU of a UDP packet. When using ICE, it seems essential to use TLS, to avoid the MTU problems and also to avoid routers mangling the SIP headers (ICE doesn't need help from routers, they only confuse the algorithm)

12 years, 11 months

What is the valid values for flags field in dispatcher table?

by Gary Chen

Trying to figure out the values for flags field. where can I find the meaning of flags for each value like: flags 1 = ? flags 2 = ? flags 3 = ? flags 4 = ? flags 5 = ? flags 6 = ? flags 7 = ? flags 8 = ? Gary

12 years, 11 months

Re: [SR-Users] "kamctl cr show" when carrierroute table has another name

by Uri Shacked

OK i got it. on the kamctl, the show is a SQL and the reload is $CTLCMD this is the difference... thanks On Wed, Feb 8, 2012 at 7:45 PM, Henning Westerholt <hw(a)kamailio.org> wrote: > On Wednesday 08 February 2012, Uri Shacked wrote: > > Can u explain why does the reload takes the table name from cfg and > > the show from the kamctlrc ? > > Hi Uri, > > the reload is executed in the server, which already uses the correct table. > The show is executed from the script (its just a database operation, you > could > also use a mysql client), which uses the wrong table. > > Viele Grüße/ best regards, > > Henning Westerholt >

12 years, 11 months

Re: [SR-Users] "kamctl cr show" when carrierroute table has another name

by Uri Shacked

> > > anyone for this? > > Hi, > > after resolving the field type issue :-), i changed the params in kamctlrc > to point to the right DB. > now, i notice that when i use the command "kamctl cr show" iget an error > that it does not find the table "carrierroute". > in the cfg file it is all set and works fine, cr dump is working as > expected as well. > > in the kamctl file i can find the param - CARRIERROUTE_TABLE. but where is > it set from? > anyone knows where do i make tha change in order for the kamctl to "know" > the names of the tables i use? > > thanks, > Uri >

12 years, 11 months

← Newer
1
...
8
9
10
11
12
13
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2012