sr-users September 2011

sr-users@lists.kamailio.org

69 participants
109 discussions

by Pete Ashdown

I have been trying to accomplish a couple tasks with Kamailio over the past month with no luck. What I need is a bit of one-on-one training with someone who knows the lay of the land. If you do this kind of consulting and can use Skype with possibly a shared-screen terminal, please drop me an email with your rate.

12 years, 5 months

[Kamailio-Users] Converting rtpproxy recorded .rtp file to .wav file

by Vikram Ragukumar

Hello, I used Kamailio+rtpproxy to record a session and rtpproxy outputs the following files long_file_name.a.rtp, long_file_name.a.rtcp, long_file_name.o.rtp, long_file_name.o.rtcp http://www.rtpproxy.org/wiki/RTPproxy/FAQ From the Rtpproxy FAQ above, i tried to extract the audio using rtpbreak and sox. rtpbreak -W -r long_file_name.a.rtp rtpbreak -W -r long_file_name.o.rtp The above commands generate rtp.0.0.raw, rtp.1.0.raw. Then when i run sox using sox --combine merge -r 8k -A rtp.0.0.raw -r 8k -A rtp.1.0.raw -t wavpcm -s out.wav i get the following errors : sox: invalid option -- - sox: -c must be given a number Is there a switch/anything else that i am missing ? Thanks in advance, Regards, Vikram.

12 years, 10 months

Problem with REGISTER retransmissions

by Alejandro Mingo

Hi, Since we installed last version of Kamailio (3.1.4) we have been experiencing a big problem with REGISTER retransmissions. When the server receives a retransmitted REGISTER it removes the binding and the UAC remains unregistered until next refreshing period. I include a PCAP capture that shows this behaviour. I am not 100% sure that this problem never happened with older versions. Has anybody experienced the same problem? Thanks in advanced. Alejandro.

12 years, 11 months

Re: [SR-Users] OPENSER MIB

by Daniel-Constantin Mierla

Hello Stefan, On 3/14/11 11:03 AM, Stefan Tiedje wrote: > Thanks for the answer. > Maybe I have some older versions of the OPENSER-MIB and the other > related MIB's since I could not find the counter you pointed at. I'm > using a MIB browser for reading the MIB's. > Is the suggested counter "expired dialogs" added in a specific release > of Kamailio? Which? We use Kamailio 3.0.2. I used Kamailio and recommend using it sine it has the latest commits for stability. However, what I wrote before is pretty much not related to the version. There is a counter that tracks the processed dialogs, but seems it is not exported by default through snmpstats module. The statistics counter is named "processed_dialogs", implemented by dialog module. You can dump all internal statistics through kamctl or via xmlrpc command, but probably to export it through snmpstats you may need to extend the mibs and the code of the module. I just grepped the sources of snmpstats module to see what dialog statistics it is exporting: $ grep -n _dialogs modules_k/snmpstats/* | grep get_statistic modules_k/snmpstats/alarm_checks.c:83: num_dialogs = get_statistic("active_dialogs"); modules_k/snmpstats/snmpObjects.c:404: int result = get_statistic("active_dialogs"); modules_k/snmpstats/snmpObjects.c:424: get_statistic("active_dialogs") - modules_k/snmpstats/snmpObjects.c:425: get_statistic("early_dialogs"); modules_k/snmpstats/snmpObjects.c:443: int result = get_statistic("early_dialogs"); modules_k/snmpstats/snmpObjects.c:459: int result = get_statistic("failed_dialogs"); modules_k/snmpstats/snmpObjects.c:508: int num_dialogs = get_statistic("active_dialogs"); Perhaps when the snmpstats was developed the dialog module didn't export the statistics counter of "processed_dialogs" and then it was not updated. Now, what I tried to say is that if the "processed_dialogs" counter is not available through snmpstats (and it is not now after grepping the sources) you can get its value from another application through "kamctl get_statistics all" or XMLRPC command for all of the existing kamailio releases. Upcoming one we will look to implement the export through snmpstats as well. If you have time to do it and send us a patch, we will gladly commit it to source tree in our GIT repository. Cheers, Daniel > Do you have the MIB name for the "expired dialogs" counter. I will > look for that in my version of OPENSER MIBS. > Important, do you have a link to where MIB files can be downloaded for > Kamailio 3.0.2? > Below follows an excerp from one of the MIB's. Is it old, I don't know? > > -- *********************************************************************** > > -- OPENSER-MIB: OPENSER MIB > > -- > > -- Date of Creation: Januay 2006 > > -- > > -- This MIB provides information related to the OpenSER SIP Router. > > -- > > -- Copyright (c) The Internet Society (2006) > > -- Ammendments (c) Soma Networks, Inc. (2006) > > -- > > -- All rights reserved. > > -- ***************************************************************** > > /Stefan > > ------------------------------------------------------------------------ > *From:* Daniel-Constantin Mierla [mailto:miconda@gmail.com] > *Sent:* den 14 mars 2011 10:16 > *To:* Stefan Tiedje > *Cc:* sr-users(a)lists.sip-router.org > *Subject:* Re: [SR-Users] OPENSER MIB > > Hello, > > On 3/14/11 9:42 AM, Stefan Tiedje wrote: >> Hi, >> In the Kamailio OPENSER-MIB there is the counter >> "openserTotalNumFailedDialogSetups". This is a Counter32. >> The description is: >> "The total number of calls that failed with an error. The >> following codes define a failed call:" >> *Question:* >> >> * I'm looking for the corresponding counter to >> "openserTotalNumFailedDialogSetups" who counts successful >> Dialog setups of Counter32 type. Does it exist? >> * If not, does it exist a work around? >> * Where in the code can the new suggested counter be added? >> * Something else???? >> > > the dialog module counts the number of processed dialogs, see: > http://kamailio.org/docs/modules/stable/modules_k/dialog.html#id2966360 > > There is no counter currently inside dialog module exporting exactly > the number of successfully setup dialogs, it should not be hard to do > it, though. Using the above and the number of failed and expired > dialogs, you can actually get the number of successful dialogs. > > Dialog module being the one that tracks SIP dialogs, therefore being > able to count them, now I don't know if snmpstats module exports all > the counters from dialog module. I setup snmpstats just few weeks ago > and works perfect on Ubuntu/Debian servers, but I had no need to check > dialog module counters. > > Note that you can get the list of all internal statistics via kamctl: > - kamctl fifo get_statistics all > > Or via XMLRPC if you need them remotely in another application. > > Another option is to define your statistics with statistics module. > Knowing that in SIP a successful call dialog means 200ok reply to an > INVITE transaction, you can count it in the onreply_route[abc] that > you arm for relayed transactions with t_on_reply("abc"). > > Hope these help you, > Daniel > >> Suggestion for the new counter is a name like: >> "openserTotalNumSucceededDialogSetups". It has a counter32. >> Description: "The total number of calls that succeeded" >> I know that there are the counters openserCurNumDialogs, >> openserCurNumDialogsInProgress and openserCurNumDialogsInSetup but >> these are of Gauge type who only reflects the current situation. >> These Gauge counters can't be used together with a Counter32 counter. >> That don't mix. The calculation done for the counter >> "openserCurNumDialogsInProgress" should be used where every new >> dialog setup is added to the new suggested counter. A counter of 32 >> should cover a great deal of connections. These counters are usually >> read, if used, every 15 minutes or 1 hour. >> *Rationale:* >> The reason for the new counter is that a calculation between >> succeeded and failed dialog setups can be done and be used for SLA >> agreements. Without this, its hard to make any customer versus >> provider agreements. >> /Stefan >> PS. Ask if anything is unclear and I need an answer rapidly. >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla > http://www.asipto.com -- Daniel-Constantin Mierla http://www.asipto.com

12 years, 11 months

releasing v3.2.0

by Daniel-Constantin Mierla

Hello, it is time to set the time to release v3.2.0. From my point of view, testing went very well, considering also that core and main modules were not touched much during this devel cycle, the most of the efforts were on new modules and application service components such as presence server, Lua ... A convenient date for me will be Tuesday, October 18, 2011, allowing to work a bit on packaging and docs. If there are other preferences, jump in this discussion. Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com Kamailio Advanced Training, Oct 10-13, Berlin: http://asipto.com/u/kat http://linkedin.com/in/miconda -- http://twitter.com/miconda

12 years, 12 months

Multiple INVITEs and discarded call_control

by Mino Haluz

Hi, my kamailio server is receiving from some customers 3 identical INVITEs when call is initiated (separated by 200ms). Those 3 INVITEs are making a big problem with call_control: WARNING: call_control [call_control.c:1156]: dialog to trace controlled call was not created. discarding callcontrol. That is why, the prepaid limit is not working at all in this case. This way the user can hack the prepaid protection of the account. Otherwise the call_control is fuilly functional. Anybody experienced the similar problem? If so, how to resolve it? Thanks, Mino Haluz

13 years

Balancing incoming traffic (DID)

by Anto

Hello It presents a problem because I do not know how to assimilate the implementation. Until now we had a design of a proxy to balance out between several gateway, but it will add another proxy for another service (other users) and use the same gateway output or perhaps different (although not that be better if divide or unify the gateway). The problem as I have with the routing entry, which is not very well how to implement it. Now we have the design like this: -GW ----\ / - CARRIER1 USER ------ KAMAILIO ----- GW ---- + \ - CARRIER2 -GW ----/ And becomes like this: -GW ----\ / - CARRIER1 USER ------ KAMAILIOSERVICE1 ----- GW ---- + \ - CARRIER2 -GW ----/ -GW ----\ / - CARRIER1 USER ------ KAMAILIOSERVICE2 ----- GW ---- + \ - CARRIER2 -GW ----/ Or maybe using the same gateway. The problem is that each carrier provides DID number (I use the same for both services). Kamailio had thought to put a gateway between the carriers and that they did check the service and send it to the corresponding gateway (in the case of the gateway separately), or put it in the proxy gateway and making checking for routing to proxy (in the case of using the same gateway). What would be better? Any recommendations on how to put this into practice?. The biggest question that I believe is the routing table, as if this new proxy routes the traffic into and leaves her in the field via ip, also pass through the output data (I have doubts whether SIP level, following standard, you can not pass through the exit) and want it to be direct (USER -> Proxy -> GW -> CARRIER), just past the entrance. Anyone could advise me where I could find more information to set up this scenario?. thanks and sorry for bothering you with this question ;-). best regards

13 years

New to Kamailio - make problem

by Peter Schrock

I can't seem to get kamailio to "*make*". I am following the directions on the wiki on how to install. I have downloaded, compiled, and installed mysql server and every time I run to "*make all*" with kamailio, I get this error message. At first, I was thinking that *km_db_mysql.c* couldn't find the file. The header seems to be looking for *mysql.h* (at *#include <mysql/mysql.h>*). I found the file from installing mysql server and I thought I'd help * km_db_mysql.c* to find the file, but it still gives me this error. I am using a power pc running OS X.5.1. CC (gcc) [M db_mysql.so] km_db_mysql.o km_db_mysql.c:49:19: error: mysql/mysql.h: No such file or directory km_db_mysql.c: In function ‘kam_mysql_mod_init’: km_db_mysql.c:92: warning: implicit declaration of function ‘mysql_get_client_info’ km_db_mysql.c:92: warning: format ‘%s’ expects type ‘char *’, but argument 7 has type ‘int’ km_db_mysql.c:92: warning: format ‘%s’ expects type ‘char *’, but argument 6 has type ‘int’ make[1]: *** [km_db_mysql.o] Error 1 make: *** [modules] Error 1 Peter Schrock

13 years

Kamailio as dispatcher fails due to from domain on extension.

by Henrik Aagaard Sørensen

I'm using Kamailio as dispatcher to a FreeSwitch setup. Currently it "almost" work. I have 2 extensions connected to my FreeSwitch via Kamailio. However, I can only send calls one way because Kamailio seems to change the domain on the extension. One extension is registered with ID(a)sip.my-domain.com. This I can send calls to. The other extension is registered with ID@local-ip. This I cannot send calls to. Isn't it possible to have Kamailio register the extension on my FreeSwitch with @sip.my-domain.com? If I register both extension directly to my FreeSwitch everything works.

13 years

SNMPStats and multiple proxies

by Antanas Masevicius

Hello, been trying to run two sip-router proxies in parallel and to feed data from them to snmpd via agentx. But it looks like snmpd deamon directly routes snmp request just to one (probably first connected) proxy. What ways this can be solved? Currenly i am thinking like running two concurrent snmpd daemons binded to specific IP addresses. Is there a better way to do it? best regards, -- Antanas Masevicius

13 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2011