sr-users March 2011

sr-users@lists.kamailio.org

83 participants
123 discussions

by Pang, Gary (Liguang)

Dear Sir, I have a difficulty to register a CISCO SPA 303 IP phone. I can register a Soft phone to the SER server by setting the Hold IP address, Proxy, account number.. But it is not working with the CISCO phone. Can you advice? Thanks, Gary

13 years, 9 months

decimal fraction problem

by 侯旭光

Hello I need to add q value while using function append_branch(),but the function only takes decimal fraction as the parameter. What if I want to use pv to add q value? The $var and $avp just have string and integer type. Thanks a lot!

13 years, 9 months

OPENSER MIB

by Stefan Tiedje

Hi, In the Kamailio OPENSER-MIB there is the counter "openserTotalNumFailedDialogSetups". This is a Counter32. The description is: "The total number of calls that failed with an error. The following codes define a failed call:" Question: * I'm looking for the corresponding counter to "openserTotalNumFailedDialogSetups" who counts successful Dialog setups of Counter32 type. Does it exist? * If not, does it exist a work around? * Where in the code can the new suggested counter be added? * Something else???? Suggestion for the new counter is a name like: "openserTotalNumSucceededDialogSetups". It has a counter32. Description: "The total number of calls that succeeded" I know that there are the counters openserCurNumDialogs, openserCurNumDialogsInProgress and openserCurNumDialogsInSetup but these are of Gauge type who only reflects the current situation. These Gauge counters can't be used together with a Counter32 counter. That don't mix. The calculation done for the counter "openserCurNumDialogsInProgress" should be used where every new dialog setup is added to the new suggested counter. A counter of 32 should cover a great deal of connections. These counters are usually read, if used, every 15 minutes or 1 hour. Rationale: The reason for the new counter is that a calculation between succeeded and failed dialog setups can be done and be used for SLA agreements. Without this, its hard to make any customer versus provider agreements. /Stefan PS. Ask if anything is unclear and I need an answer rapidly.

13 years, 9 months

acc failed_transaction_flag and t_newtran()

by Juha Heinanen

in order to get invite requests accounted, it seems that accounting flags need to be set before t_newtran() is called. is there any way to unset the accounting flags after calling t_newtran()? for example, i would not like to account invites that result to 407 proxy authentication required. -- juha

13 years, 9 months

pseudo variables available in on_reply route

by Asgaroth

Hi All, I have a requirement to perform some processing based on the source and destination addresses on a message in on_reply route. I can get source ip address using $si pseudo variable, but I cant seem to access the destination ($dd). Is there any way I can access destination ip/domain of message in on_reply route? Thanks for any tips.

13 years, 9 months

Call subscriber online

by Stefano Larosa

Hi, I'm new on Kamailio 3.0 This is the scenario I would like to build: 1 Subscriber A -> 2 kamailio -> 3 asterisk -> 4 Kamailio -> 5 Subscriber B Everything is working fine until the last step This is the code that manage the call from asterisk to kamailio if(is_method("INVITE") && (src_ip==80.169.xx.xx) ) { route(TOPROXYUSER); } And this is the code that should end the call the the subscriber route[TOPROXYUSER] { xlog("L_NOTICE", "$mi route[$rm][0] $fu -> $ru START PROCESSING MESSAGE\n"); rewritehostport("127.0.0.1:5060"); if (is_method("BYE|CANCEL")) { route(FAIL_ONE); } else if (is_method("INVITE")){ route(RELAY); }; exit; } Thank you, Stivu.

13 years, 9 months

kamailio setup

by roman＠dmytriv.com

Hello there! I'm in the process of setting my first kamailio server and run into dead end. I was following your instructions very closely at http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-git I'm using Centos 5.5 i386. Everything vent pretty much fine until step 7 were I had to create MySQL database. When I run /usr/local/kamailio-3.1/etc/kamailio/kamctlrc it gives me "Permission denied" error. I was able to access kamctlrc with a text editor and uncommented DBENGINE=MYSQL. Now when I run /usr/local/kamailio-3.1/sbin/kamdbctl create I have ERROR 2002. Please take a look at the attachment. Please help. Roman

13 years, 9 months

Question about LCR

by Geoffrey Mina

Hello, I have a question about LCR which I have been unable to solve. I have 4 upstream carrier gateways owned by 2 carriers. Each carrier provides a primary and secondary gateway for load balancing purposes. On a 5XX error I am trying to send the same call to the other carrier. If both carriers reject the call with 5XX, I allow the response to go downstream to my asterisk server. The issue I am running into is that in a scenario where both my carriers respond with a 5XX, I end up presenting the same call to all 4 gateways. I would like to present the call to one gateway on each carrier and not try the same carriers second gateway for the same call. Here is what is happening now: ASTERISK --> INVITE --> KAMAILIO INVITE --> CARRIER A/GATEWAY 1 <-- 5XX Error INVITE --> CARRIER A/GATEWAY 2 <-- 5XX Error INVITE --> CARRIER B/GATEWAY 1 <-- 5XX Error INVITE --> CARRIER B/GATEWAY 2 <-- 5XX Error KAMAILIO --> 5XX Error --> ASTERISK OR any combination of the above... i.e. ASTERISK --> INVITE --> KAMAILIO INVITE --> CARRIER A/GATEWAY 1 <-- 5XX Error INVITE --> CARRIER B/GATEWAY 2 <-- 5XX Error INVITE --> CARRIER B/GATEWAY 1 <-- 5XX Error INVITE --> CARRIER A/GATEWAY 2 <-- 5XX Error KAMAILIO --> 5XX Error --> ASTERISK What I want to happen is: ASTERISK --> INVITE --> KAMAILIO INVITE --> CARRIER A/GATEWAY 1 or 2 <-- 5XX Error INVITE --> CARRIER B/GATEWAY 1 or 2 <-- 5XX Error KAMAILIO --> 5XX Error --> ASTERISK I tried dealing with the issue using some flags on the gateway, but i couldn't get the logic to work properly. Here is the path I was heading down, but my plan fell apart after some testing. CARRIER A has a gateway flag of "1" CARRIER B has a gateway flag of "2" failure_route[1]{ $var(gw_flag) = $avp(i:712); while(next_gw()){ if($var(gw_flag) != $avp(i:712)){ xlog("L_INFO","Found an LCR destination which is different than current, routing. ($ci)"); t_on_reply("1"); t_on_failure("1"); t_relay(); exit; }else{ xlog("L_INFO","The next destination in LCR has the same AVP flag, skipping. ($ci)"); } } # let the reply go upstram - it is the default action xlog("L_ERR", "No Next Gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; } Any help would be greatly appreciated. Thanks, Geoff

13 years, 9 months

kamailio setup

by roman＠dmytriv.com

13 years, 9 months

Does Kamailio support RFC5626 as Edge Proxy(or outbound proxy)

by Derrick Ding

Dear All, I wonder if Kamailio supports RFC5626 as edge proxy or outbound proxy. That is, Edge Proxy adds a Path header with a flow token and includes the "ob" parameter when Processing Register Requests. Eg: Path: <sip:VskztcQ/S8p4WPbOnHbuyh5iJvJIW3ib@ep1.example.com;lr;ob> If does, how can I config it in kamailio.cfg. At present, Kamailio can only forward register msg to sip server and reply 200 OK to SIP UA with "require: outbound" when register accepted. No "Path" and "ob" added in the msg forwarded to SIP server. You answer is appreciated!! Sincerely, Derrick

13 years, 9 months

← Newer
1
...
7
8
9
10
11
12
13
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2011