sr-users December 2010

sr-users@lists.kamailio.org

63 participants
114 discussions

[OpenSER-Users] uaCSTA support in openser

by Hugo Koblmueller

high.all! i'm wondering if there is any support of uaCSTA in openser (planned)? i'm just working on the integration of asterisk (*) environment to OCS 2007 environment, having openSER in the middle (mainly for TCP/UDP translation and smoothing out the protocol deficienes on both sides). in this setup the * having the openSER in front is talking to the OCS (and vice versa) via the OCS mediation server, which is moreorless sending standard SIP messages, which enables normal softphone (integration to *) of the office communicator. this configuration is already working... now i'm planning to go for the CTI integration, where there is no OCS mediation server in between OCS and openSER, doing the translation of SIP/CSTA to SIP. i'm thinking about using openSER for this task, that's why i'm looking for a CSTA module or perl programm, which is capable of this functionality. afaik for the CTI communication there isn't the full complexity of CSTA needed, just a subset mainly for call setup and call clearing. anyone having experience on this topic? thx & cheers -hugo Great Ideas for Small Devices Hugo Koblmueller Senior Staff Engineer Software Development COMNEON electronic technology GmbH & Co. OHG Freistaedter Strasse 400 4040 Linz Austria hugo.koblmueller(a)comneon.com tel: fax: mobile: Skype ID: +43 (5) 1777 - 15730 <http://www.plaxo.com/click_to_call?lang=en&src=jj_signature&To=%2B43+%285%2 9+1777+%2D+15730&Email=hugo(a)koblmueller.com> +43 (5) 1777 - 15810 +43 (676) 82051280 <http://www.plaxo.com/click_to_call?lang=en&src=jj_signature&To=%2B43+%28676 %29+82051280&Email=hugo(a)koblmueller.com> drhookson Want to always have my latest info? <https://www.plaxo.com/add_me?u=21475050628&src=client_sig_212_1_banner_join &invite=1&lang=en> Want a signature like <http://www.plaxo.com/signature?src=client_sig_212_1_banner_sig&lang=en> this?

13 years, 2 months

503 Server error response for REGISTER request (Asterisk v1.6.0.5)

by Vikram Ragukumar

Hello, I had posted this question earlier on asterisk-users, but didn't receive any reply, so I'm posting on sr-users in the hope that someone can provide guidance on how to debug this problem. Our setup involves a Sip softphone registering with a fresh install of Asterisk v1.6.0.5 through an outbound proxy (Kamailio v3.1.1). We observe that about 80% of the time, immediately after startup of the softphone, when the softphone sends a REGISTER message, Asterisk replies with a "503 Server error". However, subsequent REGISTER messages are replied to appropriately (with a 401 Unauthorized). There are very few devices (under 5) registered with Asterisk, so this is not an overload issue. Please find attached a SIP trace for device registration. - What might cause this behavior in Asterisk ? - Are there any config file parameters that require to be changed ? - Would it help to see any other specific logs, if so which ones ? Thanks and Regards, Vikram.

13 years, 2 months

SIP Router 3.03 topoh

by dotnetdub

Hi All, Kamailio had just started to get SIP attacked and it looked like they were sending a bad header and Kamailio died.. Nov 20 19:48:51 sipproxy sip[3383]: INFO: <script>: [R-MAIN =>] Request method OPTIONS is to our domain (212.124.123.170) Nov 20 19:48:51 sipproxy sip[3378]: INFO: <script>: [ROUTE-1] Received registration from sip:1368250498@sipproxy (212.124.123.170) Nov 20 19:48:51 sipproxy sip[3378]: INFO: <script>: [ROUTE-1 !] Credentials invalid; issuing challenge Nov 20 19:48:51 sipproxy sip[3381]: INFO: <script>: [ROUTE-1] Received registration from sip:100@sipproxy (212.124.123.170) Nov 20 19:48:51 sipproxy sip[3381]: INFO: <script>: [ROUTE-1 !] Credentials invalid; issuing challenge Nov 20 19:48:51 sipproxy sip[3374]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.401446] kamailio[3374]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3373]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.636774] kamailio[3373]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3388]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.680305] kamailio[3388]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3390]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.710444] kamailio[3390]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3383]: INFO: <script>: [ROUTE-1] Received registration from sip:2478223614@sipproxy (212.124.123.170) Nov 20 19:48:51 sipproxy sip[3383]: INFO: <script>: [ROUTE-1 !] Credentials invalid; issuing challenge Nov 20 19:48:51 sipproxy sip[3378]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.753334] kamailio[3378]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3379]: INFO: <script>: [ROUTE-1] Received registration from sip:noauth@sipproxy (212.124.123.170) Nov 20 19:48:51 sipproxy sip[3379]: INFO: <script>: [ROUTE-1 !] Credentials invalid; issuing challenge Nov 20 19:48:51 sipproxy sip[3375]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.768137] kamailio[3375]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3383]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.775628] kamailio[3383]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3386]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.790925] kamailio[3386]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3379]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.798926] kamailio[3379]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:51 sipproxy sip[3381]: INFO: <core> [parser/msg_parser.c:339]: ERROR: bad header field [CSeq: 1 REGISTER ACK] Nov 20 19:48:51 sipproxy kernel: [1033573.815493] kamailio[3381]: segfault at 18 ip b70070d9 sp bf916118 error 4 in topoh.so[b7004000+c000] Nov 20 19:48:54 sipproxy sip[3344]: INFO: <core> [main.c:737]: INFO: terminating due to SIGCHLD Nov 20 19:48:54 sipproxy sip[3399]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3396]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3400]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3392]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3401]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3394]: INFO: <core> [main.c:788]: INFO: signal 15 received Nov 20 19:48:54 sipproxy sip[3402]: INFO: <core> [main.c:788]: INFO: signal 15 received Thanks Brian

13 years, 2 months

Re: [SR-Users] SIP between IPv4 and IPv6 agents

by Komáromi Péter

Hello! I went through your letters and start as following: ------------------------------------------------------- root@ubuntu:/home/yeti/rtpproxy# /etc/init.d/kamailio restart Restarting kamailio: kamailioloading modules under /usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/ Listening on udp: 192.168.124.158:5060 udp: FEC0:0:0:0:0:0:0:2:5060 tcp: 192.168.124.158:5060 tcp: FEC0:0:0:0:0:0:0:2:5060 Aliases: tcp: ubuntu:5060 udp: ubuntu:5060 root@ubuntu:/home/yeti/rtpproxy# kamctl restart INFO: Stopping Kamailio : INFO: stopped INFO: Starting Kamailio : INFO: started (pid: 7597) root@ubuntu:/home/yeti/rtpproxy# rtpproxy restart ------------------------------------------------------- So I guess everything is starting fine. The users can register and call each other. Their data are in the mysql database`s location table. I put this into the kamailio.cfg file: -------------------------------------------------------- # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")) { if (af == inet) { if ( $(rU{s.substr,0,1}) == "6") { force_rtp_proxy("ie"); } else { force_rtp_proxy("ee"); } } else { if ( $(rU{s.substr,0,1}) == "4") { force_rtp_proxy("ei"); } else { force_rtp_proxy("ii"); } } } else if (is_method("200OK")) { if (af == inet) { if ( $(rU{s.substr,0,1}) == "6") { force_rtp_proxy("ei"); } else { force_rtp_proxy("ee"); } } else { if ( $(rU{s.substr,0,1}) == "4") { force_rtp_proxy("ie"); } else { force_rtp_proxy("ii"); } } } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } ---------------------------------------------------------- But, unfortunately there is no RTP traffic yet. :( What do you thing guys, what can be the problem? Regards, Peter Am 02.12.2010 13:06, schrieb Komáromi Péter: > Hi! > > So if you say it is possible to solve the problem with the only > location table, the location_inet4 and location_inet6 is not > certainly necessary... do I _have to_ use the 4to6.cfg file from the > source of kamailio, or not? When you call force_rtp_proxy() then you have to provide the i/e flags to tell rtpproxy how it should bridge the call. Therefore you need to know for every call: - is the caller IPv4 or IPv6? - is the callee IPv4 or IPv6? Finding out the protocol version of the caller is rather easy: if (af == inet) { # caller ipv4 ... } else { # caller ipv6 ... } But finding out if the callee is v4 or v6 is difficult. Actually it may even be that the callee is registered with 2 clients at the same time - one using v4 and v6. As far as I know this multi-registration scenario can not be handled currently - only single-registrations or multi-registrations which use the same protocol version are supported. Anyway - there are several approaches how to detect the IP version of the callee. - fixed mapping: for example if you know that all usernames starting with 1 are IPv4 clients, and all usernames starting with 2 are IPv6 clients, then you can detect the callee's protocol version manually, e.g: if ( $(rU{s.substr,0,1}) == "1") { # callee ipv4 ... } else { # callee ipv6 ... } - check destination URI if it contains a IPv4 or IPv6 address, e.g. use http://www.kamailio.org/dokuwiki/doku.php/transformations:devel#resubst_exp… to test if $dd contains '.' which would indicate a ipv4 address. - use dedicated location tables > (Because it uses them, for instance here: if (method == "REGISTER") > { if (af == inet) { save("location-inet4"); } else if (af == inet6) > { save("location-inet6");...) > > If I do not have to use it, I do not need to merge it with my > kamailio.cfg file, the steps I have to do are: install rtpproxy, > start it with the appropriate parameters and set the forcing in the > kamailio.cfg file?! The more I think about it I prefer the approach with separated location tables. It should be rather easy to integrate the 2 location tables into your existing config. regards Klaus

13 years, 3 months

OpenIMSCore and Kamalio Integration

by "Andrés S. García Ruiz"

Hi everybody, I'm trying to deploy an IMS network with OpenIMSCore and Kamailio. Since OpenIMSCore has been already tested along with Mobicents, now I want substitute Mobicents for Kamailio. I've also successfully installed Kamailio. I can run it without any problem, but when SIP Publish messages arrive at Kamalio, it answers with "407 Proxy Authentication Required". The IMS presentity is already registered against the OpenIMSCore. How can I solve that problem? The publish message sent: PUBLISH sip:testuser01@open-ims.test SIP/2.0 Route: <sip:ciervo.inf.um.es:5060;lr>, <sip:iscmark@scscf.open-ims.test:6060;lr;s=1;h=0;d=0;a=7369703a74657374757365723031406f70656e2d696d732e74657374> Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. CSeq: 1 PUBLISH From: "testuser01" <sip:testuser01@open-ims.test>;tag=ff123bda To: "testuser01" <sip:testuser01@open-ims.test> Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 Via: SIP/2.0/UDP 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 Via: SIP/2.0/TCP 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- Max-Forwards: 15 Content-Type: application/pidf+xml Expires: 30000 Event: presence Contact: <sip:testuser01@155.54.190.166:8060> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO User-Agent: X-Lite IMS-OSGi-Client 0.1 CVS-Mon_Nov_29_10-14-33_CET_2010 Content-Length: 451 P-Asserted-Identity: <sip:testuser01@open-ims.test> P-Charging-Vector: icid-value="P-CSCFabcd000000004cf3708400000002";icid-generated-at=155.54.210.134;orig-ioi="open-ims.test" <?xml version='1.0' encoding='UTF-8'?><presence xmlns='urn:ietf:params:xml:ns:pidf' xmlns:c='urn:ietf:params:xml:ns:pidf:cipid' xmlns:dm='urn:ietf:params:xml:ns:pidf:data-model' xmlns:rpid='urn:ietf:params:xml:ns:pidf:rpid' entity='sip:testuser01@open-ims.test'><tuple id='t6b9a6ab3'><status><basic>open</basic></status></tuple><dm:person id='p34b126e5'><rpid:activities><rpid:Online/></rpid:activities><dm:note>Online</dm:note></dm:person></presence> Kamailio answer: SIP/2.0 407 Proxy Authentication Required Call-ID: K28QO9PYAE5vn3RNdYOkIEddMEd6yDiqeAW7DwSt6XV. CSeq: 1 PUBLISH From: "testuser01" <sip:testuser01@open-ims.test>;tag=ff123bda To: "testuser01" <sip:testuser01@open-ims.test>;tag=b27e1a1d33761e85846fc98f5f3a7e58.3d3a Via: SIP/2.0/UDP 155.54.210.135:6060;branch=z9hG4bKa31a.6cba1cd2.0 Via: SIP/2.0/UDP 155.54.210.134:4060;branch=z9hG4bKa31a.71481d13.0;i=1 Via: SIP/2.0/TCP 155.54.190.166:8060;rport=41624;branch=z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z- Proxy-Authenticate: Digest realm="open-ims.test", nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" Server: kamailio (3.1.0 (i386/linux)) Content-Length: 0 Kamailio log: 5(15391) DEBUG: <core> [parser/msg_parser.c:628]: SIP Request: 5(15391) DEBUG: <core> [parser/msg_parser.c:630]: method: <PUBLISH> 5(15391) DEBUG: <core> [parser/msg_parser.c:632]: uri: <sip:testuser01@open-ims.test> 5(15391) DEBUG: <core> [parser/msg_parser.c:634]: version: <SIP/2.0> 5(15391) DEBUG: <core> [parser/msg_parser.c:165]: get_hdr_field: cseq <CSeq>: <1> <PUBLISH> 5(15391) DEBUG: <core> [parser/parse_to.c:803]: end of header reached, state=10 5(15391) DEBUG: <core> [parser/msg_parser.c:185]: DEBUG: get_hdr_field: <To> [45]; uri=[sip:testuser01@open-ims.test] 5(15391) DEBUG: <core> [parser/msg_parser.c:187]: DEBUG: to body ["testuser01" <sip:testuser01@open-ims.test> ] 5(15391) DEBUG: <core> [parser/parse_via.c:1287]: Found param type 232, <branch> = <z9hG4bKa31a.6cba1cd2.0>; state=16 5(15391) DEBUG: <core> [parser/parse_via.c:2300]: end of header reached, state=5 5(15391) DEBUG: <core> [parser/msg_parser.c:513]: parse_headers: Via found, flags=2 5(15391) DEBUG: <core> [parser/msg_parser.c:515]: parse_headers: this is the first via 5(15391) DEBUG: <core> [receive.c:145]: After parse_msg... 5(15391) DEBUG: <core> [receive.c:186]: preparing to run routing scripts... 5(15391) DEBUG: <core> [parser/parse_via.c:1287]: Found param type 232, <branch> = <z9hG4bKa31a.71481d13.0>; state=6 5(15391) DEBUG: <core> [parser/parse_via.c:1287]: Found param type 236, <i> = <1>; state=16 5(15391) DEBUG: <core> [parser/parse_via.c:2300]: end of header reached, state=5 5(15391) DEBUG: <core> [parser/msg_parser.c:513]: parse_headers: Via found, flags=100 5(15391) DEBUG: <core> [parser/msg_parser.c:526]: parse_headers: this is the second via 5(15391) DEBUG: <core> [parser/parse_via.c:1287]: Found param type 235, <rport> = <41624>; state=6 5(15391) DEBUG: <core> [parser/parse_via.c:1287]: Found param type 232, <branch> = <z9hG4bK-d8754z-ce7487ff34be55f9-1---d8754z->; state=16 5(15391) DEBUG: <core> [parser/parse_via.c:2300]: end of header reached, state=5 5(15391) DEBUG: <core> [parser/msg_parser.c:513]: parse_headers: Via found, flags=100 5(15391) DEBUG: maxfwd [mf_funcs.c:85]: value = 15 5(15391) DEBUG: <core> [parser/msg_parser.c:199]: DEBUG: get_hdr_body : content_length=451 5(15391) DEBUG: <core> [parser/msg_parser.c:101]: found end of header 5(15391) DEBUG: <core> [parser/parse_to.c:174]: DEBUG: add_param: tag=ff123bda 5(15391) DEBUG: <core> [parser/parse_to.c:803]: end of header reached, state=29 5(15391) DEBUG: sanity [mod_sanity.c:217]: all sanity checks passed 5(15391) DEBUG: siputils [checks.c:73]: no totag 5(15391) DEBUG: tm [t_lookup.c:1081]: DEBUG: t_check_msg: msg id=1 global id=0 T start=0xffffffff 5(15391) DEBUG: tm [t_lookup.c:528]: t_lookup_request: start searching: hash=41274, isACK=0 5(15391) DEBUG: tm [t_lookup.c:485]: DEBUG: RFC3261 transaction matching failed 5(15391) DEBUG: tm [t_lookup.c:711]: DEBUG: t_lookup_request: no transaction found 5(15391) DEBUG: tm [t_lookup.c:1150]: DEBUG: t_check_msg: msg id=1 global id=1 T end=(nil) 5(15391) DEBUG: <core> [socket_info.c:501]: grep_sock_info - checking if host==us: 13==9 && [open-ims.test] == [127.0.0.1] 5(15391) DEBUG: <core> [socket_info.c:504]: grep_sock_info - checking if port 5060 matches port 5060 5(15391) DEBUG: <core> [socket_info.c:501]: grep_sock_info - checking if host==us: 13==14 && [open-ims.test] == [155.54.190.245] 5(15391) DEBUG: <core> [socket_info.c:504]: grep_sock_info - checking if port 5060 matches port 5060 5(15391) DEBUG: <core> [socket_info.c:501]: grep_sock_info - checking if host==us: 13==9 && [open-ims.test] == [127.0.0.1] 5(15391) DEBUG: <core> [socket_info.c:504]: grep_sock_info - checking if port 5060 matches port 5060 5(15391) DEBUG: <core> [socket_info.c:501]: grep_sock_info - checking if host==us: 13==14 && [open-ims.test] == [155.54.190.245] 5(15391) DEBUG: <core> [socket_info.c:504]: grep_sock_info - checking if port 5060 matches port 5060 5(15391) DEBUG: auth_db [authorize.c:239]: realm value [open-ims.test] 5(15391) DEBUG: auth [api.c:85]: auth:pre_auth: Credentials with realm 'open-ims.test' not found 5(15391) DEBUG: auth_db [authorize.c:257]: not authenticated 5(15391) DEBUG: auth [challenge.c:102]: build_challenge_hf: realm='open-ims.test' 5(15391) DEBUG: auth [challenge.c:236]: auth: 'Proxy-Authenticate: Digest realm="open-ims.test", nonce="TPNwMkzzbwZRE1piAM8yHaXGsXvwS16v" ' 5(15391) DEBUG: sl [sl.c:278]: reply in stateless mode (sl) 5(15391) DEBUG: <core> [msg_translator.c:207]: check_via_address(155.54.210.135, 155.54.210.135, 0) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [usr_avp.c:646]: DEBUG:destroy_avp_list: destroying list (nil) 5(15391) DEBUG: <core> [receive.c:289]: receive_msg: cleaning up Thanks in advance, Andrés. -- ----------------------- Andrés S. García Ruiz ----------------------- e-mail: asgarcia(a)um.es Teléfono: (+34) 868 888258 Dpto. de Ingeniería de la Información y las Comunicaciones Facultad de Informática Universidad de Murcia 30100 Campus de Espinardo

13 years, 3 months

problem in MAKE command during installation Sip Express Router

by city spider

hello i want to install Sip Express Router on CENT OS 5.5. the problem is that after untar the ser-0.9.6.src.tar.gz package my system doesn't operate MAKE command ,and returns 127 errors containing message "the system doesn't find the folder...." is there any solution for this problem... waiting for your response.

13 years, 3 months

Call Routing Not working

by Tim King

Below is my current code and my calls are just getting 100 trying -- your call is important to us even between to locally registered extension. Any guidance as to how to simplify troubleshooting this routing? ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE") ) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } #!ifdef WITH_FREESWITCH # save callee ID $avp(callee) = $rU; route(FSDISPATCH); #!endif # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif #!ifdef WITH_CFGSAMPLES /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } #!endif if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_FREESWITCH if(route(FSINBOUND)) return; #!endif #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } #!ifdef WITH_FREESWITCH # FreeSWITCH routing blocks route[FSINBOUND] { if($si== $sel(cfg_get.freeswitch.bindip) && $sp==$sel(cfg_get.freeswitch.bindport)) return 1; return -1; } route[FSDISPATCH] { if(!is_method("INVITE")) return; if(route(FSINBOUND)) return; # dial number selection switch($rU) { case /"^41$": # 41 - voicebox menu # allow only authenticated users if($au==$null) { sl_send_reply("403", "Not allowed"); exit; } $rU = "vm-" + $au; break; case /"^441[0-9][0-9]$": # starting with 44 folowed by 1XY - direct call to voice box strip(2); route(FSVBOX); break; case /"^433[01][0-9][0-9]$": # starting with 433 folowed by (0|1)XY - conference strip(2); break; case /"^45[0-9]+$": strip(2); break; default: # offline - send to voicebox if (!registered("location")) { route(FSVBOX); exit; } # online - do bridging prefix("kb-"); if(is_method("INVITE")) { # in case of failure - re-route to FreeSWITCH VoiceMail t_on_failure("FAIL_FSVBOX"); } } route(FSRELAY); exit; } route[FSVBOX] { if(!($rU=~"^1[0-9][0-9]+$")) return; prefix("vb-"); route(FSRELAY); } # Send to FreeSWITCH route[FSRELAY] { $du = "sip:" + $sel(cfg_get.freeswitch.bindip) + ":" + $sel(cfg_get.freeswitch.bindport); if($var(newbranch)==1) { append_branch(); $var(newbranch) = 0; } route(RELAY); exit; } #!endif #!ifdef WITH_FREESWITCH failure_route[FAIL_FSVBOX] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } if (t_check_status("486|408")) { # re-route to FreeSWITCH VoiceMail $rU = $avp(callee); $var(newbranch) = 1; route(FSVBOX); } } #!endif # sample config file for dispatcher module #!ifdef WITH_DISPATCHER modparam("dispatcher", "db_url", "mysql://openser:password@localhost /openser") route{ if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); drop(); }; ds_select_dst("1", "0"); forward(); # t_relay(); } #!endif

13 years, 3 months

Routing error

by Tim King

My calls are not making it to the dispatcher and I am not sure what I am doing wrong. Can anyone see what I need to modify so that my calls can be distributed to my free switch boxes via the dispatcher module? cat /usr/local/etc/kamailio/kamailio.cfg #!KAMAILIO #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_USRLOCDB #!define WITH_FREESWITCH #!define WITH_ANTIFLOOD #!define WITH_DISPATCHER #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define DBURL "mysql://openser:password@localhost/openser" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif #!ifdef WITH_FREESWITCH freeswitch.bindip = "127.0.0.1" desc "FreeSWITCH IP Address" freeswitch.bindport = "5090" desc "FreeSWITCH Port" #!endif ####### Modules Section ######## # set paths to location of modules #!ifdef LOCAL_TEST_RUN mpath="modules_k:modules" #!else mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "dispatcher.so" # loadmodule "modules/tm/tm.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # use caching modparam("domain", "db_mode", 1) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org<sip%3Apinger(a)kamailio.org> ") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } #!ifdef WITH_FREESWITCH # save callee ID $avp(callee) = $rU; route(FSDISPATCH); #!endif # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif #!ifdef WITH_CFGSAMPLES /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } #!endif if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_FREESWITCH if(route(FSINBOUND)) return; #!endif #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } #!ifdef WITH_FREESWITCH # FreeSWITCH routing blocks route[FSINBOUND] { if($si== $sel(cfg_get.freeswitch.bindip) && $sp==$sel(cfg_get.freeswitch.bindport)) return 1; return -1; } route[FSDISPATCH] { if(!is_method("INVITE")) return; if(route(FSINBOUND)) return; # dial number selection switch($rU) { case /"^41$": # 41 - voicebox menu # allow only authenticated users if($au==$null) { sl_send_reply("403", "Not allowed"); exit; } $rU = "vm-" + $au; break; case /"^441[0-9][0-9]$": # starting with 44 folowed by 1XY - direct call to voice box strip(2); route(FSVBOX); break; case /"^433[01][0-9][0-9]$": # starting with 433 folowed by (0|1)XY - conference strip(2); break; case /"^45[0-9]+$": strip(2); break; default: # offline - send to voicebox if (!registered("location")) { route(FSVBOX); exit; } # online - do bridging prefix("kb-"); if(is_method("INVITE")) { # in case of failure - re-route to FreeSWITCH VoiceMail t_on_failure("FAIL_FSVBOX"); } } route(FSRELAY); exit; } route[FSVBOX] { if(!($rU=~"^1[0-9][0-9]+$")) return; prefix("vb-"); route(FSRELAY); } # Send to FreeSWITCH route[FSRELAY] { $du = "sip:" + $sel(cfg_get.freeswitch.bindip) + ":" + $sel(cfg_get.freeswitch.bindport); if($var(newbranch)==1) { append_branch(); $var(newbranch) = 0; } route(RELAY); exit; } #!endif #!ifdef WITH_FREESWITCH failure_route[FAIL_FSVBOX] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } if (t_check_status("486|408")) { # re-route to FreeSWITCH VoiceMail $rU = $avp(callee); $var(newbranch) = 1; route(FSVBOX); } } #!endif # sample config file for dispatcher module #!ifdef WITH_DISPATCHER modparam("dispatcher", "db_url", "mysql://openser:password@localhost /openser") route{ if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); drop(); }; ds_select_dst("1", "0"); forward(); # t_relay(); } #!endif

13 years, 3 months

Re: [SR-Users] avp_db_query returning wrong data

by Alex Balashov

On 11/23/2010 06:41 PM, Jijo wrote: > Yes it work with many UDP children. There were some concurrency issues with the Postgres module a while back, discovered after the 3.1.0 release. I remember something about it because we are extremely heavy users of the Postgres module as well. Unfortunately, I can't find the thread. Try the latest git master HEAD: git clone git://git.sip-router.org/sip-router cd sip-router make FLAVOUR=kamailio cfg make all And see if it changes. -- Alex Balashov - Principal Evariste Systems LLC 1170 Peachtree Street NE 12th Floor, Suite 1200 Atlanta, GA 30309 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/

13 years, 3 months

Re: [SR-Users] RLS issue

by Klaus Darilion

1. Kamailio will send the request to the address of the list member (normal DNS lookups). 2. If there is a problem with OpenIMS then you should ask the OpenIMS guys, we are not familiar with OpenIMS. regards klaus Am 22.12.2010 12:57, schrieb "Andrés S. García Ruiz": > > Thanks a lot for your response! > > I've been thinking about it and there's something abnormal. Firs, the > RLS is suppose to send the initial SUBSCRIBE to the S-CSCF instead of > sending it to the I-CSCF. Then, I don't know why the S-CSCF translates > the SUBSCRIBE URI (sip:testuser02@open-ims.test) to > "sip:testuser01@155.54.190.245:8060;rinstance=9b7761b4bcaa4bd0". All the > routing is the default configuration of both cscfs and rls. > > How can I change the routing of the RLS in order it to send the > SUBSCRIBE messages to the S-CSCF? > > Here's the configuration file: > / > #!KAMAILIO > > #!ifdef ACCDB_COMMENT > ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL > DEFAULT ''; > #!endif > > ####### Defined Values ######### > > #!define WITH_DEBUG > #!define WITH_AUTH > #!define WITH_MYSQL > #!define WITH_USRLOCDB > #!define WITH_PRESENCE > #!define WITH_XCAPSRV > > > # *** Value defines - IDs used later in config > #!ifdef WITH_MYSQL > # - database URL - used to connect to database server by modules such > # as: auth_db, acc, usrloc, a.s.o. > #!define DBURL "mysql://openser:openserrw@localhost/openser" > #!endif > #!ifdef WITH_MULTIDOMAIN > # - the value for 'use_domain' parameters > #!define MULTIDOMAIN 1 > #!else > #!define MULTIDOMAIN 0 > #!endif > > # - flags > # FLT_ - per transaction (message) flags > # FLB_ - per branch flags > #!define FLT_ACC 1 > #!define FLT_ACCMISSED 2 > #!define FLT_ACCFAILED 3 > #!define FLT_NATS 5 > > #!define FLB_NATB 6 > #!define FLB_NATSIPPING 7 > > ####### Global Parameters ######### > > #!ifdef WITH_DEBUG > debug=4 > log_stderror=yes > #!else > debug=2 > log_stderror=no > #!endif > > memdbg=5 > memlog=5 > > log_facility=LOG_LOCAL0 > > fork=yes > children=4 > > /* uncomment the next line to disable TCP (default on) */ > #disable_tcp=yes > > > /* uncomment the next line to disable the auto discovery of local aliases > based on reverse DNS on IPs (default on) */ > #auto_aliases=no > > /* add local domain aliases */ > alias="open-ims.test" > > /* uncomment and configure the following line if you want Kamailio to > bind on a specific interface/port/proto (default bind on all available) */ > #listen=udp:10.0.0.10:5060 > > /* port to listen to > * - can be specified more than once if needed to listen on many ports */ > port=5060 > > #!ifdef WITH_TLS > enable_tls=yes > #!endif > > #!ifdef WITH_XCAPSRV > tcp_accept_no_cl=yes > #!endif > > ####### Custom Parameters ######### > > # These parameters can be modified runtime via RPC interface > # - see the documentation of 'cfg_rpc' module. > # > # Format: group.id = value 'desc' description > # Access: $sel(cfg_get.group.id) or @cfg_get.group.id > # > > #!ifdef WITH_PSTN > # PSTN GW Routing > # > # - pstn.gw_ip: valid IP or hostname as string value, example: > # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" > # > # - by default is empty to avoid misrouting > pstn.gw_ip = "" desc "PSTN GW Address" > #!endif > > > ####### Modules Section ######## > > # set paths to location of modules > #!ifdef LOCAL_TEST_RUN > mpath="modules_k:modules" > #!else > mpath="/usr/local/kamailio-3.1-xcap-rls/lib/kamailio/modules_k/:/usr/local/kamailio-3.1-xcap-rls/lib/kamailio/modules/" > #!endif > > #!ifdef WITH_MYSQL > loadmodule "db_mysql.so" > #!endif > > loadmodule "mi_fifo.so" > loadmodule "kex.so" > loadmodule "tm.so" > loadmodule "tmx.so" > loadmodule "sl.so" > loadmodule "rr.so" > loadmodule "pv.so" > loadmodule "maxfwd.so" > loadmodule "usrloc.so" > loadmodule "registrar.so" > loadmodule "textops.so" > loadmodule "siputils.so" > loadmodule "xlog.so" > loadmodule "sanity.so" > loadmodule "ctl.so" > loadmodule "mi_rpc.so" > loadmodule "acc.so" > # loadmodule "pua_mi.so" > # loadmodule "pua_usrloc.so" > > > #!ifdef WITH_AUTH > loadmodule "auth.so" > loadmodule "auth_db.so" > #!ifdef WITH_IPAUTH > loadmodule "permissions.so" > #!endif > #!endif > > #!ifdef WITH_ALIASDB > loadmodule "alias_db.so" > #!endif > > #!ifdef WITH_MULTIDOMAIN > loadmodule "domain.so" > #!endif > > #!ifdef WITH_PRESENCE > loadmodule "presence.so" > loadmodule "presence_xml.so" > loadmodule "pua.so" > loadmodule "rls.so" > #!endif > > #!ifdef WITH_NAT > loadmodule "nathelper.so" > loadmodule "rtpproxy.so" > #!endif > > #!ifdef WITH_TLS > loadmodule "tls.so" > #!endif > > #!ifdef WITH_ANTIFLOOD > loadmodule "htable.so" > loadmodule "pike.so" > #!endif > > #!ifdef WITH_XMLRPC > loadmodule "xmlrpc.so" > #!endif > > #!ifdef WITH_XCAPSRV > loadmodule "xhttp.so" > loadmodule "xcap_server.so" > #!endif > > # ----------------- setting module-specific parameters --------------- > > > # ----- mi_fifo params ----- > modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") > > > # ----- tm params ----- > # auto-discard branches from previous serial forking leg > modparam("tm", "failure_reply_mode", 3) > # default retransmission timeout: 30sec > modparam("tm", "fr_timer", 30000) > # default invite retransmission timeout after 1xx: 120sec > modparam("tm", "fr_inv_timer", 120000) > > > # ----- rr params ----- > # add value to ;lr param to cope with most of the UAs > modparam("rr", "enable_full_lr", 1) > # do not append from tag to the RR (no need for this script) > modparam("rr", "append_fromtag", 0) > > > # ----- registrar params ----- > modparam("registrar", "method_filtering", 1) > /* uncomment the next line to disable parallel forking via location */ > # modparam("registrar", "append_branches", 0) > /* uncomment the next line not to allow more than 10 contacts per AOR */ > #modparam("registrar", "max_contacts", 10) > > > # ----- acc params ----- > /* what special events should be accounted ? */ > modparam("acc", "early_media", 0) > modparam("acc", "report_ack", 0) > modparam("acc", "report_cancels", 0) > /* by default ww do not adjust the direct of the sequential requests. > if you enable this parameter, be sure the enable "append_fromtag" > in "rr" module */ > modparam("acc", "detect_direction", 0) > /* account triggers (flags) */ > modparam("acc", "log_flag", FLT_ACC) > modparam("acc", "log_missed_flag", FLT_ACCMISSED) > modparam("acc", "log_extra", > "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") > modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) > /* enhanced DB accounting */ > #!ifdef WITH_ACCDB > modparam("acc", "db_flag", FLT_ACC) > modparam("acc", "db_missed_flag", FLT_ACCMISSED) > modparam("acc", "db_url", DBURL) > modparam("acc", "db_extra", > "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") > #!endif > > > # ----- usrloc params ----- > /* enable DB persistency for location entries */ > #!ifdef WITH_USRLOCDB > modparam("usrloc", "db_url", DBURL) > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "use_domain", MULTIDOMAIN) > #!endif > > > # ----- auth_db params ----- > #!ifdef WITH_AUTH > modparam("auth_db", "db_url", DBURL) > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > modparam("auth_db", "load_credentials", "") > modparam("auth_db", "use_domain", MULTIDOMAIN) > > # ----- permissions params ----- > #!ifdef WITH_IPAUTH > modparam("permissions", "db_url", DBURL) > modparam("permissions", "db_mode", 1) > #!endif > > #!endif > > > # ----- alias_db params ----- > #!ifdef WITH_ALIASDB > modparam("alias_db", "db_url", DBURL) > modparam("alias_db", "use_domain", MULTIDOMAIN) > #!endif > > > # ----- domain params ----- > #!ifdef WITH_MULTIDOMAIN > modparam("domain", "db_url", DBURL) > # use caching > modparam("domain", "db_mode", 1) > # register callback to match myself condition with domains list > modparam("domain", "register_myself", 1) > #!endif > > > #!ifdef WITH_PRESENCE > # ----- presence params ----- > modparam("presence", "db_url", DBURL) > > # ----- presence_xml params ----- > modparam("presence_xml", "db_url", DBURL) > modparam("presence_xml", "force_active", 1) > modparam("presence_xml", "integrated_xcap_server", 1) > modparam("rls", "db_url", DBURL) > modparam("rls", "xcap_table", "xcap") > modparam("rls", "rlsubs_table", "rls_watchers") > modparam("rls", "rlpres_table", "rls_presentity") > modparam("rls", "clean_period", 100) > modparam("rls", "waitn_time", 50) > modparam("rls", "max_expires", 10800) > modparam("rls", "hash_size", 9) > modparam("rls", "xcap_root", "http://ciervo.inf.um.es/xcap-root:5060") > modparam("rls", "integrated_xcap_server", 1) > modparam("rls", "to_presence_code", 10) > modparam("rls", "rls_event", "presence") > #!endif > > > #!ifdef WITH_NAT > # ----- rtpproxy params ----- > modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") > > # ----- nathelper params ----- > modparam("nathelper", "natping_interval", 30) > modparam("nathelper", "ping_nated_only", 1) > modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) > modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") > > # params needed for NAT traversal in other modules > modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") > modparam("usrloc", "nat_bflag", FLB_NATB) > #!endif > > > #!ifdef WITH_TLS > # ----- tls params ----- > modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") > #!endif > > #!ifdef WITH_ANTIFLOOD > # ----- pike params ----- > modparam("pike", "sampling_time_unit", 2) > modparam("pike", "reqs_density_per_unit", 16) > modparam("pike", "remove_latency", 4) > > # ----- htable params ----- > # ip ban htable with autoexpire after 5 minutes > modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") > #!endif > > #!ifdef WITH_XMLRPC > # ----- xmlrpc params ----- > modparam("xmlrpc", "route", "XMLRPC"); > modparam("xmlrpc", "url_match", "^/RPC") > #!endif > > #!ifdef WITH_XCAPSRV > # ----- xcap_server params ----- > modparam("xcap_server", "db_url", DBURL) > # modparam("rls", "integrated_xcap_server", 1) > #!endif > > ####### Routing Logic ######## > > > # Main SIP request routing logic > # - processing of any incoming SIP request starts with this route > route { > > # per request initial checks > route(REQINIT); > > # NAT detection > route(NAT); > > # handle requests within SIP dialogs > route(WITHINDLG); > > ### only initial requests (no To tag) > > # CANCEL processing > if (is_method("CANCEL")) > { > if (t_check_trans()) > t_relay(); > exit; > } > > t_check_trans(); > > # authentication > route(AUTH); > > # record routing for dialog forming requests (in case they are routed) > # - remove preloaded route headers > remove_hf("Route"); > if (is_method("INVITE|SUBSCRIBE")) > record_route(); > > # account only INVITEs > if (is_method("INVITE")) > { > setflag(FLT_ACC); # do accounting > } > > # dispatch requests to foreign domains > route(SIPOUT); > > ### requests for my local domains > > # handle presence related requests > route(PRESENCE); > > # handle registrations > route(REGISTRAR); > > if ($rU==$null) > { > # request with no Username in RURI > sl_send_reply("484","Address Incomplete"); > exit; > } > > # dispatch destinations to PSTN > route(PSTN); > > # user location service > route(LOCATION); > > route(RELAY); > } > > > route[RELAY] { > #!ifdef WITH_NAT > if (check_route_param("nat=yes")) { > setbflag(FLB_NATB); > } > if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { > route(RTPPROXY); > } > #!endif > > /* example how to enable some additional event routes */ > if (is_method("INVITE")) { > #t_on_branch("BRANCH_ONE"); > t_on_reply("REPLY_ONE"); > t_on_failure("FAIL_ONE"); > } > > if (!t_relay()) { > sl_reply_error(); > } > exit; > } > > # Per SIP request initial checks > route[REQINIT] { > #!ifdef WITH_ANTIFLOOD > # flood dection from same IP and traffic ban for a while > # be sure you exclude checking trusted peers, such as pstn gateways > # - local host excluded (e.g., loop to self) > if(src_ip!=myself) > { > if($sht(ipban=>$si)!=$null) > { > # ip is already blocked > xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); > exit; > } > if (!pike_check_req()) > { > xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); > $sht(ipban=>$si) = 1; > exit; > } > } > #!endif > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > } > > if(!sanity_check("1511", "7")) > { > xlog("Malformed SIP message from $si:$sp\n"); > exit; > } > } > > # Handle requests within SIP dialogs > route[WITHINDLG] { > if (has_totag()) { > # sequential request withing a dialog should > # take the path determined by record-routing > if (loose_route()) { > if (is_method("BYE")) { > setflag(FLT_ACC); # do accounting ... > setflag(FLT_ACCFAILED); # ... even if the transaction fails > } > route(RELAY); > } else { > if (is_method("SUBSCRIBE") && uri == myself) { > # in-dialog subscribe requests > route(PRESENCE); > exit; > } > if ( is_method("ACK") ) { > if ( t_check_trans() ) { > # no loose-route, but stateful ACK; > # must be an ACK after a 487 > # or e.g. 404 from upstream server > t_relay(); > exit; > } else { > # ACK without matching transaction ... ignore and discard > exit; > } > } > sl_send_reply("404","Not here"); > } > exit; > } > } > > # Handle SIP registrations > route[REGISTRAR] { > if (is_method("REGISTER")) > { > if(isflagset(FLT_NATS)) > { > setbflag(FLB_NATB); > # uncomment next line to do SIP NAT pinging > ## setbflag(FLB_NATSIPPING); > } > if (!save("location")) > sl_reply_error(); > > exit; > } > } > > # USER location service > route[LOCATION] { > > #!ifdef WITH_ALIASDB > # search in DB-based aliases > alias_db_lookup("dbaliases"); > #!endif > > if (!lookup("location")) { > switch ($rc) { > case -1: > case -3: > t_newtran(); > t_reply("404", "Not Found"); > exit; > case -2: > sl_send_reply("405", "Method Not Allowed"); > exit; > } > } > > # when routing via usrloc, log the missed calls also > if (is_method("INVITE")) > { > setflag(FLT_ACCMISSED); > } > } > > # Presence server route > route[PRESENCE] { > > if(!is_method("PUBLISH|SUBSCRIBE")) > return; > > #!ifdef WITH_PRESENCE > > if (!t_newtran()) > { > sl_reply_error(); > exit; > }; > > if(is_method("PUBLISH")) > { > handle_publish(); > t_release(); > } > else if( is_method("SUBSCRIBE")) > { > $var(ret_code)= rls_handle_subscribe(); > > if($var(ret_code)== 10) { > handle_subscribe(); > } > t_release(); > > }else if(method=="NOTIFY") > { > rls_handle_notify(); > } > > exit; > #!endif > # if presence enabled, this part will not be executed > if (is_method("PUBLISH") || $rU==$null) > { > sl_send_reply("404", "Not here"); > exit; > } > return; > } > > # Authentication route > route[AUTH] { > return; > #!ifdef WITH_AUTH > if (is_method("REGISTER")) > { > # authenticate the REGISTER requests (uncomment to enable auth) > if (!www_authorize("$td", "subscriber")) > { > www_challenge("$td", "0"); > exit; > } > > if ($au!=$tU) > { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > } else { > > #!ifdef WITH_IPAUTH > if(allow_source_address()) > { > # source IP allowed > return; > } > #!endif > # authenticate if from local subscriber > if (from_uri==myself) > { > if (!proxy_authorize("$fd", "subscriber")) { > proxy_challenge("$fd", "0"); > exit; > } > if (is_method("PUBLISH")) > { > if ($au!=$tU) { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > } else { > if ($au!=$fU) { > sl_send_reply("403","Forbidden auth ID"); > exit; > } > } > > consume_credentials(); > # caller authenticated > } else { > # caller is not local subscriber, then check if it calls > # a local destination, otherwise deny, not an open relay here > if (!uri==myself) > { > sl_send_reply("403","Not relaying"); > exit; > } > } > } > #!endif > return; > } > > # Caller NAT detection route > route[NAT] { > #!ifdef WITH_NAT > force_rport(); > if (nat_uac_test("19")) { > if (method=="REGISTER") { > fix_nated_register(); > } else { > fix_nated_contact(); > } > setflag(FLT_NATS); > } > #!endif > return; > } > > # RTPProxy control > route[RTPPROXY] { > #!ifdef WITH_NAT > if (is_method("BYE")) { > unforce_rtp_proxy(); > } else if (is_method("INVITE")){ > force_rtp_proxy(); > } > if (!has_totag()) add_rr_param(";nat=yes"); > #!endif > return; > } > > # Routing to foreign domains > route[SIPOUT] { > if (!uri==myself) > { > append_hf("P-hint: outbound\r\n"); > route(RELAY); > } > } > > # PSTN GW routing > route[PSTN] { > #!ifdef WITH_PSTN > # check if PSTN GW IP is defined > if (strempty($sel(cfg_get.pstn.gw_ip))) { > xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); > return; > } > > # route to PSTN dialed numbers starting with '+' or '00' > # (international format) > # - update the condition to match your dialing rules for PSTN routing > if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) > return; > > # only local users allowed to call > if(from_uri!=myself) { > sl_send_reply("403", "Not Allowed"); > exit; > } > > $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); > > route(RELAY); > exit; > #!endif > > return; > } > > # XMLRPC routing > #!ifdef WITH_XMLRPC > route[XMLRPC] > { > # allow XMLRPC from localhost > if ((method=="POST" || method=="GET") > && (src_ip==127.0.0.1)) { > # close connection only for xmlrpclib user agents (there is a bug in > # xmlrpclib: it waits for EOF before interpreting the response). > if ($hdr(User-Agent) =~ "xmlrpclib") > set_reply_close(); > set_reply_no_connect(); > dispatch_rpc(); > exit; > } > send_reply("403", "Forbidden"); > exit; > } > #!endif > > # Sample branch router > branch_route[BRANCH_ONE] { > xdbg("new branch at $ru\n"); > } > > # Sample onreply route > onreply_route[REPLY_ONE] { > xdbg("incoming reply\n"); > #!ifdef WITH_NAT > if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) > && status=~"(183)|(2[0-9][0-9])") { > force_rtp_proxy(); > } > if (isbflagset("6")) { > fix_nated_contact(); > } > #!endif > } > > # Sample failure route > failure_route[FAIL_ONE] { > #!ifdef WITH_NAT > if (is_method("INVITE") > && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { > unforce_rtp_proxy(); > } > #!endif > > if (t_is_canceled()) { > exit; > } > > # uncomment the following lines if you want to block client > # redirect based on 3xx replies. > ##if (t_check_status("3[0-9][0-9]")) { > ##t_reply("404","Not found"); > ## exit; > ##} > > # uncomment the following lines if you want to redirect the failed > # calls to a different new destination > ##if (t_check_status("486|408")) { > ## sethostport("192.168.2.100:5060"); > ## append_branch(); > ## # do not set the missed call flag again > ## t_relay(); > ##} > } > > #!ifdef WITH_XCAPSRV > # #!define WITH_XHTTPAUTH > event_route[xhttp:request] { > xdbg("===== xhttp: request [$rv] $rm => $hu\n"); > > #!ifdef WITH_XHTTPAUTH > if (!www_authorize("xcap", "subscriber")) > { > www_challenge("xcap", "0"); > exit; > } > #!endif > xdbg("===== xhttp: Antes del if de $hu\n"); > if($hu=~"^/xcap-root/") > { > xdbg("===== xhttp: Dentro del if de $hu\n"); > set_reply_close(); > set_reply_no_connect(); > # xcap ops > $xcapuri(u=>data) = $hu; > if($xcapuri(u=>xuid)=~"^sip:.+@.+") > $var(uri) = $xcapuri(u=>xuid); > else if($xcapuri(u=>xuid)=~".+@.+") > $var(uri) = "sip:" + $xcapuri(u=>xuid); > else > $var(uri) = "sip:"+ $xcapuri(u=>xuid) + "@" + $Ri; > xlog("===== xhttp: $xcapuri(u=>auid) : $xcapuri(u=>xuid)\n"); > if($xcapuri(u=>auid)=="xcap-caps") > { > $var(xbody) = > "<?xml version='1.0' encoding='UTF-8'?> > <xcap-caps xmlns='urn:ietf:params:xml:ns:xcap-caps'> > <auids> > <auid>rls-services</auid> > <auid>pidf-manipulation</auid> > <auid>xcap-caps</auid> > <auid>resource-lists</auid> > <auid>pres-rules</auid> > <auid>org.openmobilealliance.pres-rules</auid> > </auids> > <extensions> > </extensions> > <namespaces> > <namespace>urn:ietf:params:xml:ns:rls-services</namespace> > <namespace>urn:ietf:params:xml:ns:pidf</namespace> > <namespace>urn:ietf:params:xml:ns:xcap-caps</namespace> > <namespace>urn:ietf:params:xml:ns:resource-lists</namespace> > <namespace>urn:ietf:params:xml:ns:pres-rules</namespace> > </namespaces> > </xcap-caps>"; > xhttp_reply("200", "ok", "application/xcap-caps+xml", > "$var(xbody)"); > exit; > } > > #!ifdef WITH_XHTTPAUTH > # be sure auth user access only its documents > if ($au!=$(var(uri){uri.user})) { > xhttp_reply("403", "Forbidden", "text/html", > "<html><body>$si:$sp</body></html>"); > exit; > } > > #!endif > xdbg("===== xhttp: Antes del switch $rm => $hu\n"); > switch($rm) { > case "PUT": > xcaps_put("$var(uri)", "$hu", "$rb"); > if($xcapuri(u=>auid)=~"pres-rules") > { > xlog("===== xhttp put: refreshing watchers for $var(uri)\n"); > pres_update_watchers("$var(uri)", "presence"); > pres_refresh_watchers("$var(uri)", "presence", 1); > } > exit; > break; > case "GET": > xlog("===== xhttp: get $var(uri) => $hu\n"); > xcaps_get("$var(uri)", "$hu"); > exit; > break; > case "DELETE": > xcaps_del("$var(uri)", "$hu"); > if($xcapuri(u=>auid)=~"pres-rules") > { > xlog("===== xhttp del: refreshing watchers for $var(uri)\n"); > pres_update_watchers("$var(uri)", "presence"); > pres_refresh_watchers("$var(uri)", "presence", 1); > } > exit; > break; > } > } > > # http ops > xhttp_reply("200", "ok", "text/html", > "<html><body>OK: $si:$sp</body></html>"); > exit; > } > #!endif/ > > > Regards, > Andrés. > > El 21/12/10 10:22, Klaus Darilion escribió: >> Am 16.12.2010 13:36, schrieb "Andrés S. García Ruiz": >>> >>> B.5) P-CSCF ---- SUBSCRIBE ----> Presentity??? >>> >>> SUBSCRIBE sip:testuser01@155.54.190.245:8060;rinstance=9b7761b4bcaa4bd0 >>> SIP/2.0 >>> Record-Route: <sip:mt@pcscf.open-ims.test:4060;lr> >>> Record-Route: <sip:mt@scscf.open-ims.test:6060;lr> >>> Via: SIP/2.0/TCP 155.54.210.134:4060;branch=z9hG4bK07df.baa7cf24.0 >>> Via: SIP/2.0/UDP >>> 155.54.210.135:6060;received=155.54.210.135;rport=6060;branch=z9hG4bK07df.8a35e4f3.0 >>> >>> >>> Via: SIP/2.0/UDP 155.54.210.136;branch=z9hG4bK07df.3688b985.0 >>> Via: SIP/2.0/UDP 155.54.190.245;branch=z9hG4bK07df.964e0ba7.0 >>> To: sip:testuser01@open-ims.test >>> From: >>> sip:restricted_areas@open-ims.test;tag=533cb9e91f4b999cf76861cbb9ed54ed-32d5 >>> >>> >>> CSeq: 10 SUBSCRIBE >>> Call-ID: 7fd8dfdd-21694(a)127.0.0.1 >>> Content-Length: 0 >>> User-Agent: kamailio (3.2.0-dev1 (i386/linux)) >>> Max-Forwards: 14 >>> Event: presence >>> Contact: <sip:155.54.190.245:5060;transport=udp> >>> Expires: 10810 >>> Max-Forwards: 70 >>> Support: eventlist >>> P-Called-Party-ID: <sip:testuser01@open-ims.test> >>> >>> >>> The step B.5 is sent directly to the presentity testuser01. Instead of >>> that, I thought that message was suppose to be sent to the presence >>> server in the URI that is shown in Contact header. >> >> >> If the P-CSCF is not forwarding the request as supposed, I guess you >> have to fix the routing on the P-CSCF. >> >> klaus >

13 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2010