sr-users November 2010

sr-users@lists.kamailio.org

75 participants
112 discussions

Re: [SR-Users] installing dispatcher module
by Daniel-Constantin Mierla 05 Nov '10

05 Nov '10

do not send private emails. Keep the mailing list cc-ed. Thanks, Daniel On 11/5/10 1:41 PM, Rizwan Qureshi wrote: > Thanks. Problem solved anyway. > > On Thu, Nov 4, 2010 at 10:04 PM, Daniel-Constantin Mierla > <miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote: > > Hello, > > run kamailio with -c parameter to get hints about the line where > the error happens. > > Daniel > > > On 11/4/10 4:17 PM, Rizwan Qureshi wrote: >> Hi List, >> This is my first email to this list and I am a kamailio newbie. I >> have worked on asterisk a lot but this is the first time im going >> to use kamailio. >> >> I have successfully installed kamailio on my centos system. I can >> see all the modules located in the >> /usr/local/lib/kamailio/modules_k/ AND >> /usr/local/lib/kamailio/modules/ directories. But the problem is >> when i try to load the dispatcher module from kamailio.cfg it >> gives me the following error. >> >> loading modules under >> /usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/ >> ERROR: bad config file (1 errors) >> >> Has anyone any clue why this is happening? I cant find any >> details about thsi error otherwise i would have posted it. >> >> Cheers >> >> Best Regards >> Rizwan Qureshi >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla > http://www.asipto.com > > -- Daniel-Constantin Mierla http://www.asipto.com

1 0

Terminated call processing Status: 487
by JR Richardson 04 Nov '10

04 Nov '10

Hi All, I'm seeing random errors in my Kamailio 3.0.2 log: ERROR: tm [tm.c:1300]: ERROR: w_t_relay_to: t_relay_to failed ERROR: tm [t_fwd.c:1379]: ERROR: t_forward_nonack: no branches for forwarding After going blind staring at wireshark, I can consistently reproduce this error by initiating a call, then after about a second ro two, quickly hanging up. So here is my setup: SIP Phone><Asterisk><Kamailio><SIP Service Provider I see all transaction messages flowing properly through all nodes and I don't get any hung channels, all call legs release properly. I'm guessing I need a special [route] in Kamailio to handle 487 request so they look normal and not issue an error? Kamailio is forwarding the 487 messages ok, so why do I get a t_relay error? What info would be helpful to diagnose the errors? Any insight would be appreciated. Thanks. JR -- JR Richardson Engineering for the Masses

3 2

installing dispatcher module
by Rizwan Qureshi 04 Nov '10

04 Nov '10

Hi List, This is my first email to this list and I am a kamailio newbie. I have worked on asterisk a lot but this is the first time im going to use kamailio. I have successfully installed kamailio on my centos system. I can see all the modules located in the /usr/local/lib/kamailio/modules_k/ AND /usr/local/lib/kamailio/modules/ directories. But the problem is when i try to load the dispatcher module from kamailio.cfg it gives me the following error. loading modules under /usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/ ERROR: bad config file (1 errors) Has anyone any clue why this is happening? I cant find any details about thsi error otherwise i would have posted it. Cheers Best Regards Rizwan Qureshi

2 1

Try to build the SER 2.0 RC1 on Solaris 10 but failed.
by Ivan Yiu 04 Nov '10

04 Nov '10

I try to build the SER using gmake, after resolving some dependency issue, the script can run but finally got a error as follows. yacc -d -b cfg cfg.y conflicts: 1 shift/reduce gmake: *** [cfg.tab.c] Broken Pipe What is the problem?

2 1

How can I remove all RPID headers from SIP message
by Mino Haluz 04 Nov '10

04 Nov '10

Hi, I tried to add RPID headers at the beggining of SIP options on the client side, and I was able to change the caller number simply this way. How can I avoid this ? I'm searching for some function in Kamailio which would delete all RPID headers so that Kamailio could add only one (and correct) RPID header (I'm using append_rpid_hf) Thanks.

2 1

udp_send "Invalid argument"
by Juha Heinanen 04 Nov '10

04 Nov '10

in some of my tests i get the following udp send related errors, when request is t_relayed: Oct 24 11:20:20 test /usr/sbin/sip-proxy[10032]: INFO: Routing initial INVITE <sip:+35892223333@test.fi> to <sip:+35892223333@193.166.3.2;transport=udp> Oct 24 11:20:20 test /usr/sbin/sip-proxy[10032]: ERROR: <core> [udp_server.c:566]: ERROR: udp_send: sendto(sock,0xb2d1f1e8,1190,0,193.166.3.2:5060,16): Invalid argument(22) Oct 24 11:20:20 test /usr/sbin/sip-proxy[10032]: : <core> [udp_server.c:571]: CRITICAL: invalid sendtoparameters one possible reason is the server is bound to localhost and attempts to send to the net Oct 24 11:20:20 test /usr/sbin/sip-proxy[10032]: ERROR: tm [../../forward.h:148]: msg_send: ERROR: udp_send failed Oct 24 11:20:20 test /usr/sbin/sip-proxy[10032]: ERROR: tm [t_fwd.c:1244]: ERROR: t_send_branch: sending request on branch 0 failed $du is set to sip:+35892223333@193.166.3.2;transport=udp and the proxy is listening on many sockets, both 127.0.0.1 and external ip address. any idea what might cause the errors? -- juha

5 8

LCR Question
by Trevor Francis 03 Nov '10

03 Nov '10

I have managed to work my way through the LCR module documentation and added the loadmodule and module parameters. However, I dont know where to add the routing logic that will allow me to add LCR rules and gateways in Siremis and to have Kamailio recognize them. Below is my Kamailio config: Advice? root@u15396663:/var/log# cat /usr/local/etc/kamailio//kamailio.cfg #!KAMAILIO # #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_USRLOCDB #!define WITH_ACCDB #!define WITH_NAT # # Kamailio (OpenSER) SIP Server v3.1 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users(a)lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: # - define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define DBURL "mysql://root:f1n4lh0p@localhost/openser" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" #!endif ####### Modules Section ######## # set paths to location of modules #!ifdef LOCAL_TEST_RUN mpath="modules_k:modules" #!else mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "mi_datagram.so" loadmodule "rtimer.so" loadmodule "sqlops.so" loadmodule "cfgutils.so" # ----- LCR ----- loadmodule "lcr.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd;src_ip=$si") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # use caching modparam("domain", "db_mode", 1) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@finalhop.net<sip%3Apinger(a)finalhop.net> ") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif # ----- Mi_Datagram ----- modparam("mi_datagram", "socket_name", "udp:127.0.0.1:8033") # ----- Charts ----- modparam("rtimer", "timer", "name=tst;interval=300;mode=1;") modparam("rtimer", "exec", "timer=tst;route=STATS") modparam("sqlops","sqlcon", "ca=>mysql://root:f1n4lh0p@localhost/openser") # ----- LCR ----- modparam("lcr","db_url", "mysql://root:f1n4lh0p@localhost/openser") modparam("lcr","lcr_gw_table","lcr_gw") modparam("lcr","id_column", "id") modparam("lcr","lcr_id_column", "lcr_id") modparam("lcr","tag_column","tag") modparam("lcr","weight_column","gw_weight") modparam("lcr","flags_column","flags") modparam("lcr","gw_name_column","gw_name") modparam("lcr","ip_addr_column","ip_addr") modparam("lcr","port_column","port") modparam("lcr","params_column", "params") modparam("lcr","hostname_column","hostname") modparam("lcr","uri_scheme_column","uri_scheme") modparam("lcr","strip_column","strip") modparam("lcr","transport_column","transport") modparam("lcr","tag_column", "tag") modparam("lcr","defunct_column", "defunct") modparam("lcr","lcr_rule_table","lcr_rule") modparam("lcr","prefix_column","prefix") modparam("lcr","from_uri_column","from_uri") modparam("lcr","priority_column","priority") modparam("lcr","stopper_column", "stopper") modparam("lcr","enabled_column", "enabled") modparam("lcr","lcr_rule_target_table", "lcr_rule_target") modparam("lcr", "rule_id_column", "rule_id") modparam("lcr", "gw_id_column", "gw_id") modparam("lcr", "priority_column", "priority") modparam("lcr","weight_column", "weight") modparam("lcr", "lcr_count", 1) modparam("lcr","gw_uri_avp", "$avp(i:709)") modparam("lcr","ruri_user_avp", "$avp(i:500)") modparam("lcr", "flags_avp", "$avp(i:712)") modparam("lcr", "defunct_capability", 0) modparam("lcr", "lcr_id_avp", "$avp(s:lcr_id_avp)") modparam("lcr", "defunct_gw_avp", "$avp(s:defunct_gw_avp)") modparam("lcr", "lcr_rule_hash_size", 128) modparam("lcr", "lcr_gw_count", 128) modparam("lcr", "fetch_rows", 1024) ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); } # Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif } # Siremis Charts route[STATS] { sql_query("ca", "insert into statistics (time_stamp,shm_used_size,shm_real_used_size," "shm_max_used_size,shm_free_used_size,ul_users,ul_contacts) values ($Ts," "$stat(used_size),$stat(real_used_size),$stat(max_used_size)," "$stat(free_size),$stat(location-users),$stat(location-contacts))", "ra"); } # Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } root@u15396663:/var/log#

1 0

Connection tests
by Olle E. Johansson 03 Nov '10

03 Nov '10

Hello friends, Is there any way from the outside (like from MI) I can check the existing TCP/TLS connections? Can I drop them somehow? /O

3 2

buffer overflow
by Maw Zin Tun - Real Telekom 03 Nov '10

03 Nov '10

Hi List, Any idea how to correct this error ? Nov 3 15:01:18 s15391037 /usr/local/kamailio-3.0/sbin/kamailio[27812]: ERROR: <core> [pvapi.c:967]: no more space for text [84] Nov 3 15:01:18 s15391037 /usr/local/kamailio-3.0/sbin/kamailio[27812]: ERROR: <core> [pvapi.c:995]: buffer overflow -- increase the buffer size... Nov 3 15:01:18 s15391037 /usr/local/kamailio-3.0/sbin/kamailio[27812]: ERROR: sqlops [sql_api.c:204]: cannot print the sql query Thanks, Maw Tun Real Telekom

2 1

DoS on Kamailio
by Bernhard Suttner 03 Nov '10

03 Nov '10

Hi, is there a Kamailio module to prevent DoS Attacks like SIP Register Scanners? I know, that there is a way to implement that with Fail2Ban and xlog but it would be nice to have a "pure" Kamailio solution for that? Any idea is appreciated. Best regards, Bernhard Suttner

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2010