sr-users July 2009

sr-users@lists.kamailio.org

71 participants
104 discussions

[Serusers] Ser & RTPproxy does not change the SDP vodeo port.
by Amos Shahar 16 Jul '09

16 Jul '09

hi, I'm using ser 0.9.7 and RTPproxy 1.1 on diffrent servers. the ser.cfg is the nat-rtpproxy.cfg from the iptel site. I have 2 grandstream GXV-300 devices, each behind diffrent NAT, this setup is working fine for voice and RTP is relayed through the rtpproxy properly. The problem is that the video is not working, when ser gets the invite from device A and send it to device B, it change the audio port only but leave the video port the same as the port he got from device A. I'm not sure if it is an issue with the RTPproxy or the nat-helper module. any idea how to debug / resolve? do you aware of other versions of ser/rtpproxy that this setup should work with video? Thanks! Amos

1 0

[Kamailio-Users] received=IP added in Via
by catalina oancea 16 Jul '09

16 Jul '09

Hello, Does anybody know how to disable the received=IP Via parameter that is added by default from kamailio? For the case I want to disable it in, I have no NAT handling. Also, I have: dns=no rev_dns=no Anything else? Thanks Catalina

2 2

[Kamailio-Users] Clik to dial
by ALAEDDINE abbech 16 Jul '09

16 Jul '09

Hello every one I must use Openser alone to do the aplication clik to dial, who have an idea to do this application?? regards, Alasupcom

3 2

[Kamailio-Users] OpenSER stability problems in pilot project
by Munder Albert (CI/ISE) 16 Jul '09

16 Jul '09

Hello, Sorry, next try with posting this message. Attempts with attachment failed due to message size. We are running OpenSER in a pilot project and unfortunately have some stability problems. Any help or hints are appreciated. Project information OpenSER is used in a pilot project with * Appr. 5000 subscriber accounts * Appr. 1200 simultaneously registered users * Signalling encrypted with TLS * Media data encrypted with SRTP * Clients: softphones and hardphones * Re-registration time for clients: 3600 sec OpenSER configuration · Works as stateful SIP Proxy 1 mySQL database 2 Version 1.3.4.-TLS 3 Tcp_children: 100 --> is it recommended to increase this number? 4 Udp_children: 20 5 Tcp_connection_timeout: 3600 6 Shared memory: · -m 512 when error occurred 1 Now set to 1024 Problems * Shared memory consumption Shared memory usage is permanently increasing (about 50 MB per day) Application already crashed twice First messages were, these, repeated thousands of times (5915 times): Jun 17 08:54:52 si-.... /usr/local/sbin/openser[13921]: ERROR:core:tcpconn_new: shared memory allocation failure Jun 17 08:54:52 si-... /usr/local/sbin/openser[13921]: ERROR:core:handle_new_connect: tcpconn_new failed, closing socket And a few of these also (7613 times): Jun 17 08:57:24 si-... /usr/local/sbin/openser[13880]: ERROR:core:tls_accept: some error in SSL: Jun 17 08:57:24 si-... /usr/local/sbin/openser[13880]: ERROR:core:tls_print_errstack: error:1409C041:SSL routines:SSL3_SETUP_BUFFERS:malloc failure * TCP errors, lost SIP messages Examples from error messages: 14.100 times in log file from 17.06.09 Jun 17 04:03:15 si-... /usr/local/sbin/openser[13863]: ERROR:core:tcp_blocking_connect: poll error: flags 18 Jun 17 04:03:15 si-... /usr/local/sbin/openser[13863]: ERROR:core:tcp_blocking_connect: failed to retrieve SO_ERROR (111) Connection refused Jun 17 04:03:15 si-... /usr/local/sbin/openser[13863]: ERROR:core:tcpconn_connect: tcp_blocking_connect failed Jun 17 04:03:15 si-... /usr/local/sbin/openser[13863]: ERROR:core:tcp_send: connect failed Jun 17 04:03:15 si-.. /usr/local/sbin/openser[13863]: ERROR:tm:msg_send: tcp_send failed Jun 17 04:03:15 si-... /usr/local/sbin/openser[13863]: ERROR:tm:t_forward_nonack: sending request failed Appears at least 20 000 times; and in the day of the last shared memory errors, it was 225.794 times in the log file (note that the number in parenthesis is usually 1 or 2, but on that day it has reached 6): Jun 17 09:01:27 si-.... /usr/local/sbin/openser[13921]: WARNING:core:send2child: no free tcp receiver, connection passed to the leastbusy one (6) Jun 17 09:01:27 si-... /usr/local/sbin/openser[13921]: WARNING:core:send2child: no free tcp receiver, connection passed to the leastbusy one (5) * Certificate validation problems TCP traffic is currently significantly increased by some ( appr. 70) clients which failed to validate the TLS certificate. Registration is repeated every 5 sec. Circa 30 thousand per day (on that day, it was 37.162 times in log) Jun 17 04:03:10 si-024lc008 /usr/local/sbin/openser[13801]: ERROR:core:tls_accept: some error in SSL: Jun 17 04:03:10 si-024lc008 /usr/local/sbin/openser[13801]: ERROR:core:tls_print_errstack: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca Mit besten Grüßen | Best regards Albert Munder Robert Bosch GmbH IT Systems Engineering (CI/ISE) Postfach 30 02 20 70442 Stuttgart GERMANY www.bosch.com Tel. +49 711 811-40562 Fax +49 711 811-5113333 Albert.Munder(a)de.bosch.com Robert Bosch GmbH, Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 14000 Aufsichtsratsvorsitzender: Hermann Scholl; Geschäftsführung: Franz Fehrenbach, Siegfried Dais; Bernd Bohr, Wolfgang Chur, Rudolf Colm, Gerhard Kümmel, Wolfgang Malchow, Peter Marks; Volkmar Denner, Peter Tyroller.

5 6

[Kamailio-Users] no RTP randomly with rtpproxy
by Samuel Muller 16 Jul '09

16 Jul '09

A strange thing happens with RTP proxy since I compiled the v.1.2.0 release ... Radomly, (approx. 1 time per 10 calls) RTP proxy don't grab the caller's original source IP in the SDP ??? So I don't have any RTP, so no sound during the call. typical call schema : sip phone -> mitel ipbx -> kamailio -> audiocodes mediant 2000 -> pstn All the SIP headers and the SDP are ok each time ... the RTP ports are ok too, understood at each point. rtp proxy is launched with these options with a public IP address (and compiled with a modified port range) : /usr/sbin/rtpproxy -s udp:77.246.81.133 35000 -u rtpproxy rtpproxy -p /var/run/rtpproxy/rtpproxy.pid -l 77.246.81.133 -m 6000 -M 64000 kamailio is ok too in the config : kamailio IPv4 UDP sip.720.fr:46830-> rtpproxy.720.fr:35000 logs of RTP proxy (option -f to screen the debug) : # rtp ok : received command "29638_4 L 3962688592-61598521(a)10.33.146.4 77.246.81.136 35000 0_3962688592-61598523;1 1c1320846358;1" lookup on ports 6008/6010, session timer restarted pre-filling callee's address with 77.246.81.136:35000 sending reply "29638_4 6010 77.246.81.133 " caller's address filled in: 94.198.149.41:50186 (RTP) guessing RTCP port for caller to be 50187 # rtp not ok : received command "29571_2 L 3288148592-61598465(a)10.33.146.4 77.246.81.136 35000 0_3288148592-61598467;1 1c934295778;1" lookup on ports 6000/6002, session timer restarted pre-filling callee's address with 77.246.81.136:35000 sending reply "29571_2 6002 77.246.81.133 " and hop, no "caller's address filled in" ... it's exactly the same type a SIP call (with the same ip phone, etc...). I can precise that rtp proxy is running on the same machine that kamailio (v.1.4.4), but listen on a dedicated sub-if. Does someone knows something about that ? thanks ! .Samuel Muller. sml(a)720.fr

3 3

[Kamailio-Users] help for Multi-Domain
by zhangchao00001 16 Jul '09

16 Jul '09

Dear sir: I write to ask if the kamailio support multi-domain. for example, A UA belong to domain b get into domain a, could it work as well as in domain b? If so, how to configure it? Thank you.

4 3

[Kamailio-Users] sharing audio between SIP client and MSN client
by rachid 16 Jul '09

16 Jul '09

Hello all, I use kamailio to have sharing chat between a SIP client and MSN client Now i want to have a sharing audio between them but i don't know witch module to use?? someone can help me please -- ------------------------------------------------------------ BAHA Rachid Ingénieur Télécoms, INPT-Rabat GSM:(+33) 0619787609

3 4

Re: [Kamailio-Users] softswitch
by peter brooks 16 Jul '09

16 Jul '09

i would like to offer people pc2pc phone service.can i do this with you software do you have a php admin page? can you install the software for a price? _________________________________________________________________ Windows Live™ SkyDrive™: Get 25 GB of free online storage. http://windowslive.com/online/skydrive?ocid=TXT_TAGLM_WL_SD_25GB_062009

2 1

[Serusers] Check out my photos on Facebook
by Tuhin Saiful 16 Jul '09

16 Jul '09

Hi serusers(a)iptel.org, I set up a Facebook profile where I can post my pictures, videos and events and I want to add you as a friend so you can see it. First, you need to join Facebook! Once you join, you can also create your own profile. Thanks, Saiful To sign up for Facebook, follow the link below: http://www.facebook.com/p.php?i=1086097402&k=Z513ZV52PWZCUGAGYKYTWR&r 557896866 was invited to join Facebook by Tuhin Saiful. If you do not wish to receive this type of email from Facebook in the future, please click on the link below to unsubscribe. http://www.facebook.com/o.php?k=cebebd&u=557896866&mid=c8ac3aG2140d4a2G0G8 Facebook's offices are located at 1601 S. California Ave., Palo Alto, CA 94304.

1 0

[Kamailio-Users] question about $branch(name) PV
by Klaus Darilion 15 Jul '09

15 Jul '09

Hi! Does $branch(name) also handle the "main branch" ($ru, $du) as a branch, or will it handle only the additional branches? thanks klaus

3 6

← Newer
1
2
3
4
5
6
7
8
9
10
11
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2009