sr-users May 2009

sr-users@lists.kamailio.org

59 participants
114 discussions

Re: [Kamailio-Users] ACKed dialog remains in state 3 instead of 4

by Alex Balashov

Catalina, catalina oancea wrote: > From what I know the record-route header is not compulsory, and > dialog-matching can also be done using rfc dialog-matching instead of > the did parameter in record-route (modparam("dialog", > "dlg_match_mode", 2)). This is what I am trying to use, I don't want > to use the record-route header at all. It is true that you do not have to use the dialog fast-matching cookie parameter in the Record-Route header. However, you need the Record-Route header in order for the proxy to have visibility into subsequent sequential requests within the dialog, so you might as well use the parameter for faster matching. In other words, if you don't add Record-Route, your proxy won't see BYEs, re-INVITEs, etc. See RFC 3261 20.30 (http://www.ietf.org/rfc/rfc3261.txt): 20.30 Record-Route The Record-Route header field is inserted by proxies in a request to force future requests in the dialog to be routed through the proxy. -- Alex -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (678) 237-1775

14 years, 10 months

[Kamailio-Users] newbie seeks help

by Panagiotis Skoulikaritis

Hi all I'm new to the kamailio actually this is my first try. After reeding for a while various documents and the book for the openser. I tried to create my first kamailio installation and configuration. I have to admit that the kamailio / openser has a steep learning curve. Anyway I have created the attached script but it doesn't work as intended( I tried my best), even though I'm able to register users and make calls between them, I'm unable to make outgoing calls. From what I see when it reaches the route[10] it ignores the routing entries and it fails giving me the 404 error message at the end of the route[10] On the attached file are the logs of the kamailio, the config file and also a sip trace 10.10.10.1 is the ip of the kamailio server 10.10.10.2 is the ip of the test softphone Any help will be greatly appreciated Regards Panagiotis May 29 14:05:13 cacofonix /sbin/kamailio[7885]: DBG:core:db_do_init: connection 0x67b6b0 found in pool May 29 14:05:13 cacofonix /sbin/kamailio[7897]: DBG:core:db_do_init: connection 0x67b6b0 found in pool May 29 14:05:13 cacofonix /sbin/kamailio[7895]: DBG:core:init_mod_child: type=CHILD, rank=10, module=alias_db May 29 14:05:13 cacofonix /sbin/kamailio[7885]: DBG:core:init_mod_child: type=CHILD, rank=5, module=domain May 29 14:05:13 cacofonix /sbin/kamailio[7897]: DBG:core:init_mod_child: type=CHILD, rank=12, module=domain May 29 14:05:13 cacofonix /sbin/kamailio[7895]: DBG:core:db_do_init: connection 0x67b6b0 found in pool May 29 14:05:13 cacofonix /sbin/kamailio[7895]: DBG:core:init_mod_child: type=CHILD, rank=10, module=domain May 29 14:05:13 cacofonix /sbin/kamailio[7897]: DBG:core:io_watch_add: io_watch_add(0x62d760, 26, 1, (nil)), fd_no=0 May 29 14:05:13 cacofonix /sbin/kamailio[7895]: DBG:core:io_watch_add: io_watch_add(0x62d760, 22, 1, (nil)), fd_no=0 May 29 14:05:15 cacofonix /sbin/kamailio[7886]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.2 50195 May 29 14:05:23 cacofonix /sbin/kamailio[7887]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.3 50195 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.2 50195 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: SIP Request: May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: method: <INVITE> May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: uri: <sip:2109558353@10.10.10.1> May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK922E579CA9FE416C85D258AA48A53F66>; state=16 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: this is the first via May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: After parse_msg... May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=100 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: end of header reached, state=10 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: display={}, ruri={sip:2109558353@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: <To> [30]; uri=[sip:2109558353@10.10.10.1] May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: to body [<sip:2109558353@10.10.10.1> ] May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: cseq <CSeq>: <40369> <INVITE> May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:maxfwd:is_maxfwd_present: value = 70 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=200 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: content_length=200 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: found end of header May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:rr:find_first_route: No Route headers found May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:rr:loose_route: There is no Route HF May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to_param: tag=4019420419 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: end of header reached, state=29 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: display={1000}, ruri={sip:1000@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=10000 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:auth:pre_auth: credentials with given realm not found May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:auth:reserve_nonce_index: second= 12, sec_monit= -1, index= 0 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:auth:build_auth_hf: nonce index= 0 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:auth:build_auth_hf: 'Proxy-Authenticate: Digest realm="10.10.10.1", nonce="4a1fc2a20000000068765cb99b6b87c240bf07ca3cd82c2b", qop="auth" ' May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:check_via_address: params 10.10.10.2, 10.10.10.2, 0 May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:26 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: cleaning up May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: SIP Request: May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: method: <ACK> May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: uri: <sip:2109558353@10.10.10.1> May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_msg: SIP Request: May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_msg: method: <INVITE> May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_msg: uri: <sip:2109558353@10.10.10.1> May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bKFDFB9856E9FA4AF3B3FC0E502BF03396>; state=16 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: this is the first via May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:receive_msg: After parse_msg... May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=100 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_to: end of header reached, state=10 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_to: display={}, ruri={sip:2109558353@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:get_hdr_field: <To> [30]; uri=[sip:2109558353@10.10.10.1] May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:get_hdr_field: to body [<sip:2109558353@10.10.10.1> ] May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:get_hdr_field: cseq <CSeq>: <40370> <INVITE> May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:maxfwd:is_maxfwd_present: value = 70 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=200 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:get_hdr_field: content_length=200 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:get_hdr_field: found end of header May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:rr:find_first_route: No Route headers found May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:rr:loose_route: There is no Route HF May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_to_param: tag=4019420419 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_to: end of header reached, state=29 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_to: display={1000}, ruri={sip:1000@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:auth:check_nonce: comparing [4a1fc2a20000000068765cb99b6b87c240bf07ca3cd82c2b] and [4a1fc2a20000000068765cb99b6b87c240bf07ca3cd82c2b] May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK922E579CA9FE416C85D258AA48A53F66>; state=16 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: this is the first via May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: After parse_msg... May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=8 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_to_param: tag=f8f2ab2c1295e90ed7dbb499b30f44b2.acab May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_to: end of header reached, state=29 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:parse_to: display={}, ruri={sip:2109558353@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: <To> [72]; uri=[sip:2109558353@10.10.10.1] May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: to body [<sip:2109558353@10.10.10.1>] May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:sl:sl_filter_ACK: local ACK found -> dropping it! May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_new_result: allocate 48 bytes for result set at 0x67e9e0 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned from the query May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_allocate_columns: allocate 8 bytes for result names at 0x67ea20 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_allocate_columns: allocate 4 bytes for result types at 0x67ea38 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_get_columns: allocate 16 bytes for RES_NAMES[0] at 0x67ea50 May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_get_columns: RES_NAMES(0x67ea50)[0]=[password] May 29 14:05:26 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: cleaning up May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_get_columns: use DB_STRING result type May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_convert_rows: allocate 16 bytes for rows at 0x67ea70 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_convert_row: allocate 32 bytes for row values at 0x67ea90 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:db_mysql:db_mysql_str2val: converting STRING [1234] May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:auth_db:get_ha1: HA1 string calculated: b58b19cd7ec8f67671261ace34df3352 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:auth:check_response: our result = 'b6844cdf0cd709b959844e75aa3d206e' May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:auth:check_response: authorization is OK May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:auth:post_auth: nonce index= 0 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_columns: freeing 1 columns May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_columns: freeing RES_NAMES[0] at 0x67ea50 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_columns: freeing result names at 0x67ea20 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_columns: freeing result types at 0x67ea38 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_rows: freeing 1 rows May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_row: freeing row values at 0x67ea90 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_rows: freeing rows at 0x67ea70 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:db_free_result: freeing result set at 0x67e9e0 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:uri_db:check_username: Digest username and URI username match May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:registrar:lookup: '2109558353' Not found in usrloc May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:registrar:lookup: '2109558353' Not found in usrloc May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:check_via_address: params 10.10.10.2, 10.10.10.2, 0 May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:26 cacofonix /sbin/kamailio[7888]: DBG:core:receive_msg: cleaning up May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_msg: SIP Request: May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_msg: method: <ACK> May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_msg: uri: <sip:2109558353@10.10.10.1> May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_headers: flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bKFDFB9856E9FA4AF3B3FC0E502BF03396>; state=16 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_headers: this is the first via May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:receive_msg: After parse_msg... May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_headers: flags=8 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_to_param: tag=f8f2ab2c1295e90ed7dbb499b30f44b2.4410 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_to: end of header reached, state=29 May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:parse_to: display={}, ruri={sip:2109558353@10.10.10.1} May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:get_hdr_field: <To> [72]; uri=[sip:2109558353@10.10.10.1] May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:get_hdr_field: to body [<sip:2109558353@10.10.10.1>] May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:sl:sl_filter_ACK: local ACK found -> dropping it! May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:26 cacofonix /sbin/kamailio[7886]: DBG:core:receive_msg: cleaning up May 29 14:05:33 cacofonix /sbin/kamailio[7887]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.3 50195 May 29 14:05:36 cacofonix /sbin/kamailio[7888]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.2 50195 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: SIP Request: May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: method: <REGISTER> May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: uri: <sip:10.10.10.1> May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=2 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK2F79CABEA0A7425C85C5A73A6CFC20D9>; state=16 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: this is the first via May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: After parse_msg... May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=100 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: end of header reached, state=10 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_to: display={1000}, ruri={sip:1000@10.10.10.1} May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: <To> [29]; uri=[sip:1000@10.10.10.1] May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: to body [1000 <sip:1000@10.10.10.1> ] May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: cseq <CSeq>: <52298> <REGISTER> May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:maxfwd:is_maxfwd_present: value = 70 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=200 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: content_length=0 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:get_hdr_field: found end of header May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:rr:find_first_route: No Route headers found May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:rr:loose_route: There is no Route HF May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=4000 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:auth:pre_auth: credentials with given realm not found May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:auth:reserve_nonce_index: second= 26, sec_monit= -1, index= 1 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:auth:build_auth_hf: nonce index= 1 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:auth:build_auth_hf: 'WWW-Authenticate: Digest realm="cacofonix.egreta.gr", nonce="4a1fc2b000000001a3e397db4e141e53da30ad0696760da3", qop="auth" ' May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:check_via_address: params 10.10.10.2, 10.10.10.2, 0 May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:40 cacofonix /sbin/kamailio[7885]: DBG:core:receive_msg: cleaning up May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: SIP Request: May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: method: <REGISTER> May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: uri: <sip:10.10.10.1> May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_msg: version: <SIP/2.0> May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=2 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=6 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK0C47C5EB2E1247FEA747BFFB4FD915A8>; state=16 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_via: end of header reached, state=5 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: via found, flags=2 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: this is the first via May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: After parse_msg... May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: preparing to run routing scripts... May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=100 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_to: end of header reached, state=10 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_to: display={1000}, ruri={sip:1000@10.10.10.1} May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: <To> [29]; uri=[sip:1000@10.10.10.1] May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: to body [1000 <sip:1000@10.10.10.1> ] May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: cseq <CSeq>: <52299> <REGISTER> May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:maxfwd:is_maxfwd_present: value = 70 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=200 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: content_length=0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:get_hdr_field: found end of header May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:rr:find_first_route: No Route headers found May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:rr:loose_route: There is no Route HF May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:auth:check_nonce: comparing [4a1fc2b000000001a3e397db4e141e53da30ad0696760da3] and [4a1fc2b000000001a3e397db4e141e53da30ad0696760da3] May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_new_result: allocate 48 bytes for result set at 0x67d960 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_get_columns: 1 columns returned from the query May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_allocate_columns: allocate 8 bytes for result names at 0x67da90 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_allocate_columns: allocate 4 bytes for result types at 0x67daa8 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_get_columns: allocate 16 bytes for RES_NAMES[0] at 0x67dac0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_get_columns: RES_NAMES(0x67dac0)[0]=[password] May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_get_columns: use DB_STRING result type May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_convert_rows: allocate 16 bytes for rows at 0x67dae0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_convert_row: allocate 32 bytes for row values at 0x67db00 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:db_mysql:db_mysql_str2val: converting STRING [1234] May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:auth_db:get_ha1: HA1 string calculated: 90c30e48e987fd2d0ae77d90094407a5 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:auth:check_response: our result = 'd5513fb342bbfd2d4090a9ebcc4038fe' May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:auth:check_response: authorization is OK May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:auth:post_auth: nonce index= 1 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_columns: freeing 1 columns May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_columns: freeing RES_NAMES[0] at 0x67dac0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_columns: freeing result names at 0x67da90 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_columns: freeing result types at 0x67daa8 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_rows: freeing 1 rows May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_row: freeing row values at 0x67db00 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_rows: freeing rows at 0x67dae0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:db_free_result: freeing result set at 0x67d960 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:uri_db:check_username: Digest username and URI username match May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=8000000 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:parse_headers: flags=ffffffffffffffff May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:check_via_address: params 10.10.10.2, 10.10.10.2, 0 May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:destroy_avp_list: destroying list (nil) May 29 14:05:40 cacofonix /sbin/kamailio[7887]: DBG:core:receive_msg: cleaning up May 29 14:05:44 cacofonix /sbin/kamailio[7885]: DBG:core:udp_rcv_loop: probing packet received from 10.10.10.3 50195 ####### Global Parameters ######### debug=5 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "//etc/kamailio/tls/user/user-cert.pem" #tls_private_key = "//etc/kamailio/tls/user/user-privkey.pem" #tls_ca_list = "//etc/kamailio/tls/user/user-calist.pem" port=5060 /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.1.2:5060 ####### Modules Section ######## #set module path mpath="//lib64/kamailio/modules/" /* uncomment next line for MySQL DB support */ loadmodule "db_mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "permissions.so" loadmodule "group.so" loadmodule "lcr.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") #---------------permissions params ------------- modparam("permissions","db_url", "mysql://openser:openserrw@localhost/openser") modparam("permissions", "address_table", "address") modparam("permissions", "grp_col", "grp") modparam("permissions", "ip_addr_col", "ip_addr") modparam("permissions", "mask_col", "mask") modparam("permissions", "port_col", "port") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "source_col", "src_ip") modparam("permissions", "proto_col", "proto") modparam("permissions", "from_col", "from_pattern") modparam("permissions", "tag_col", "tag") modparam("permissions", "peer_tag_avp", "$avp(i:707)") # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "load_credentials", "") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ modparam("alias_db", "db_url", "mysql://openser:openserrw@localhost/openser") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ modparam("domain", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://openser:openserrw@localhost/openser") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060") #--------- LCR params ----------- modparam("lcr","db_url","mysql://openser:openserrw@localhost/openser") modparam("lcr","gw_table","gw") modparam("lcr","gw_name_column","gw_name") modparam("lcr","grp_id_column","grp_id") modparam("lcr","ip_addr_column","ip_addr") modparam("lcr","port_column","port") modparam("lcr","uri_scheme_column","uri_scheme") modparam("lcr","transport_column","transport") modparam("lcr","strip_column","strip") modparam("lcr","tag_column","tag") modparam("lcr","flags_column","flags") modparam("lcr","lcr_table","lcr") modparam("lcr","prefix_column","prefix") modparam("lcr","from_uri_column","from_uri") modparam("lcr","priority_column","priority") modparam("lcr", "contact_avp", "$avp(i:711)") modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)") modparam("lcr", "gw_uri_avp", "$avp(i:709)") modparam("^auth$|lcr", "rpid_avp", "$avp(i:302)") modparam("lcr", "ruri_user_avp", "$avp(i:500)") modparam("lcr","fr_inv_timer",90) modparam("lcr","fr_inv_timer_next",30) modparam("lcr", "flags_avp", "$avp(i:712)") modparam("lcr", "prefix_mode", 1) #-------------- group params --------------- modparam("group", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("group", "table", "grp") modparam("group", "user_column", "username") modparam("group", "domain_column", "domain") modparam("group", "group_column", "grp") modparam("group", "use_domain", 0) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; #CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } if (method=="REGISTER") { route(2); } else { route(3); }; } route[1] { # send it out now; use stateful forwarding as it works # reliably even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } route[2] { # # -- Register request handler -- # if (is_uri_host_local()) { if (!www_authorize("", "subscriber")) { www_challenge("", "1"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); exit; }; save("location"); exit; } else if { sl_send_reply("401", "Unauthorized"); }; } route[3] { # # -- non-register requests handler -- # # Verify the source (FROM) if (is_from_local()){ # From an internal domain -> check the credentials and the FROM if (!proxy_authorize("","subscriber")) { proxy_challenge("","1"); exit; } else if (!check_from()) { sl_send_reply("403", "Forbidden, use From=ID"); exit; }; consume_credentials(); # Verify aliases lookup("aliases"); # Verify the destination (URI) if (is_uri_host_local()) { # -- Inbound to Inbound route(10); } else { # -- Inbound to outbound route(11); }; } else { #Verify aliases, if found replace R-URI. lookup("aliases"); # Verify the destination (URI) if (is_uri_host_local()) { #-- Outbound to inbound route(12); } else { # -- Outbound to outbound route(13); }; }; } route[4] { # routing to the public network if (!load_gws()) { sl_send_reply("503", "Unable to load gateways"); exit; } if(!next_gw()){ sl_send_reply("503", "Unable to find a gateway"); exit; } route(1); exit; } route[10] { append_hf("P-hint: inbound->inbound \r\n"); if (uri=~"^sip:[0-9]*@") { if (is_user_in("credentials","outgoing")) { route(4); exit; } else { sl_send_reply("403", "No permissions for outgoing calls"); exit; }; }; #Native SIP destinations are handled using the location table append_hf("P-hint: inbound->inbound \r\n"); if (!lookup("location")) { sl_send_reply("404", "Not Found this is where the outgoing call fails"); exit; }; route(1); } route[11] { # from an internal domain -> outbound # Simply route the call outbound using DNS search append_hf("P-hint: inbound->outbound \r\n"); route(1); } route[12] { # From an external domain -> inbound # Verify aliases, if found replace R-URI. lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; route(1); } route[13] { #From an external domain outbound #we are not accepting these calls sl_send_reply("403", "Forbidden"); exit; } failure_route[1] { if(!next_gw()) { t_reply("503", "Service not available, no more gateways"); exit; } t_on_failure("1"); t_relay(); } ................ U 10.10.10.2:5060 -> 10.10.10.1:5060 INVITE sip:2109558353@10.10.10.1 SIP/2.0. Via: SIP/2.0/UDP 10.10.10.2:5060;rport;branch=z9hG4bK9A6FB317EAAA49239A329B7EED195972. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>. Contact: <sip:1000@10.10.10.2:5060>. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35975 INVITE. Max-Forwards: 70. Content-Type: application/sdp. User-Agent: X-PRO build 1082. Content-Length: 200. . v=0. o=1000 333892515 333892515 IN IP4 10.10.10.2. s=X-PRO. c=IN IP4 10.10.10.2. t=0 0. m=audio 8000 RTP/AVP 18 101. a=rtpmap:18 G729/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. U 10.10.10.1:5060 -> 10.10.10.2:5060 SIP/2.0 407 Proxy Authentication Required. Via: SIP/2.0/UDP 10.10.10.2:5060;rport=5060;branch=z9hG4bK9A6FB317EAAA49239A329B7EED195972. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>;tag=f8f2ab2c1295e90ed7dbb499b30f44b2.6e0d. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35975 INVITE. Proxy-Authenticate: Digest realm="10.10.10.1", nonce="4a1fc1fd0000000202d4f6f3c38c36ea4e9c7cf0e0e56c6f", qop="auth". Server: Kamailio (1.4.1-notls (x86_64/linux)). Content-Length: 0. . U 10.10.10.2:5060 -> 10.10.10.1:5060 ACK sip:2109558353@10.10.10.1 SIP/2.0. Via: SIP/2.0/UDP 10.10.10.2:5060;rport;branch=z9hG4bK9A6FB317EAAA49239A329B7EED195972. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>;tag=f8f2ab2c1295e90ed7dbb499b30f44b2.6e0d. Contact: <sip:1000@10.10.10.2:5060>. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35975 ACK. Max-Forwards: 70. Content-Length: 0. . U 10.10.10.2:5060 -> 10.10.10.1:5060 INVITE sip:2109558353@10.10.10.1 SIP/2.0. Via: SIP/2.0/UDP 10.10.10.2:5060;rport;branch=z9hG4bK5E772D41ECAE40B1BCAD721D20050C3C. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>. Contact: <sip:1000@10.10.10.2:5060>. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35976 INVITE. Proxy-Authorization: Digest username="1000",realm="10.10.10.1",nonce="4a1fc1fd0000000202d4f6f3c38c36ea4e9c7cf0e0e56c6f",response="d e87516ac763a1a2d81f8dfe15fea346",uri="sip:2109558353@10.10.10.1",qop=auth,cnonce="98BAD5C268804AE49A8C47628C1416C3",nc="0000032c". Max-Forwards: 70. Content-Type: application/sdp. User-Agent: X-PRO build 1082. Content-Length: 200. . v=0. o=1000 333892515 333892515 IN IP4 10.10.10.2. s=X-PRO. c=IN IP4 10.10.10.2. t=0 0. m=audio 8000 RTP/AVP 18 101. a=rtpmap:18 G729/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. U 10.10.10.1:5060 -> 10.10.10.2:5060 SIP/2.0 404 Not Found. Via: SIP/2.0/UDP 10.10.10.2:5060;rport=5060;branch=z9hG4bK5E772D41ECAE40B1BCAD721D20050C3C. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>;tag=f8f2ab2c1295e90ed7dbb499b30f44b2.6141. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35976 INVITE. Server: Kamailio (1.4.1-notls (x86_64/linux)). Content-Length: 0. . U 10.10.10.2:5060 -> 10.10.10.1:5060 ACK sip:2109558353@10.10.10.1 SIP/2.0. Via: SIP/2.0/UDP 10.10.10.2:5060;rport;branch=z9hG4bK5E772D41ECAE40B1BCAD721D20050C3C. From: 1000 <sip:1000@10.10.10.1>;tag=2003109495. To: <sip:2109558353@10.10.10.1>;tag=f8f2ab2c1295e90ed7dbb499b30f44b2.6141. Contact: <sip:1000@10.10.10.2:5060>. Call-ID: A51A866B-8E4A-463F-BAB5-9689225763BC(a)10.10.10.2. CSeq: 35976 ACK. Max-Forwards: 70. Content-Length: 0. . U 10.10.10.2:5060 -> 10.10.10.1:5060 . ................

14 years, 10 months

[Kamailio-Users] How to avoid RtpProxy failure when 183 arrives after a CANCEL

by Iñaki Baz Castillo

Hi, I'm experimenting this real case very often: - Kamailio invokes "force_rtproxy()" for an INVITE and sets a flag(USE_RTPPROXY). - A CANCEL arrives (so I invoke "unforce_rtpproxy()"). - Inmediatelly a 183 arrives from downstream (before the UAS receives the CANCEL generated by Kamailio). - flag(USE_RTPPROXY) is set so I invoke "force_rtpproxy()" for the 183 response, and obviously I get this error from RtpProxy module (since the RtpProxy session was ended upon recepit of the CANCEL): ERROR:nathelper:force_rtp_proxy: incorrect port 0 in reply from rtp proxy Yes, nothing wrong happens, but I would like to avoid this error in the logs. Unfortunatelly when processing the incoming CANCEL kamailio cannot unset a flag in the related INVITE transaction, so I cannot do "resetflag(USE_RTPPROXY)" when receiving the CANCEL (it's not useful at all). So I cannot guess any way to do it, suggestions? Thanks a lot. -- Iñaki Baz Castillo <ibc(a)aliax.net>

14 years, 10 months

[Kamailio-Users] play with vars

by BERGANZ François

Hello, I am looking for : how to work with vars ? I need to do var(a)=var(a)+1 How to? Thank you Cordialement, BERGANZ François cid:image001.gif@01C8F7CD.6BC1D2C0 <http://www.acropolistelecom.net/> http://www.acropolistelecom.net P Pensez à l'Environnement, n'imprimez ce mail que si nécessaire.

14 years, 10 months

[Kamailio-Users] advertised_address is not used by nathelper

by catalina oancea

Hello, I need to set listen=0.0.0.0 in kamailio (because it's very important for me to add new IPs to my server without restarting kamailio), but I see that the Via header remains 0.0.0.0 in this case. So I added: advertised_address="my_ip_address" advertised_port=5060 Then I see that for normal calls the Via is set correclty but the problem still appears in nathelper. The OPTIONS sent by nathelper still uses 0.0.0.0 in the Via header. I tried: modparam("nathelper", "natping_socket", "my_ip_address:5060") modparam("nathelper", "force_socket", "my_ip_address:5060") but Via is still 0.0.0.0 Does anybody know what to do?

14 years, 10 months

vim syntax file for config

by Daniel-Constantin Mierla

Hello, for xVIM fans, here is attached a syntax file for SIP Router config file. It is refurbished from an old openser syntax file, updated with latest config language rules. It is still missing the 'select' definition, I had no time to search for the regexp that matches its format, maybe a ser developer can give it quicker. Of course, it can take other improvement, please feel free to contribute. If there are many users, we can keep it inside the source tree, somewhere in the scripts dir. Probably most of you know, but for newbees: - place the ser.vim in your home directory under ".vim/syntax/" - when you edit the config file with vim, run "setf ser" You can add rules in vim config to auto-detect -- see google for that -- skipping in this way setf command each time you edit a config. Hope some of you enjoy it, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/ " -*- vim -*- " FILE: ser.vim " LAST MODIFICATION: 2009-05-28 18:30 " (C) Copyright 2008 Stanisław Pitucha <viraptor(a)gmail.com> " (C) Copyright 2009 Daniel-Constantin Mierla <miconda(a)gmail.com> " Version: 1.01 " USAGE: " " Save this file to $VIMFILES/syntax/ser.vim. Either add a detection " script to filetypes.vim, or set filetype manually to "ser" when " editing SIP Router configuration file with 'setf ser'. " " List of keyword and core functions taken from latest dev version of " SIP Router. Module functions not included. " " Tested only on vim 7.1 " " Example: "setf ser" " " REQUIREMENTS: " vim (>= 7) if exists("b:current_syntax") finish endif syn match serConfigParamLine '^[^=]\+=.*$' contains=serCoreParameter,serString,serConfigConstant,serSpecial,serNumber,serCppComment,serHashComment syn region serConfigModparam start='^\s*modparam\s*(' end=')' contains=serString,serNumber syn match serConfigModule '^\s*loadmodule\s*"[^"]\+"' contains=serString syn keyword serTodo TODO FIXME XXX contained syn match serOperator '!\|&&\|||\|=[~=]\?\|>\|<\|+\|-\|/\|\*\||\|&\|^\|\~\|defined\|eq\|ieq\|ne\|ine' display contained syn region serCppComment start='/\*' end='\*/' contains=serTodo syn match serHashComment '#.*$' contains=serTodo syn match serStringEscape '\\.' contained syn match serNumber '[0-9]\+' contained syn region serString matchgroup=Normal start='"' skip='\\"' end='"' contained contains=serVariable,serStringEscape syn match serVariable "$[a-zA-Z_][a-zA-Z0-9_]*$([^)]\+)$\?" contained syn match serIdentifier '[a-zA-Z_][a-zA-Z0-9_]*' contained syn keyword serStatement route if else switch case default break exit return drop while contained syn keyword serSpecial yes no on off true false enabled disabled contained syn keyword serCoreKeyword af dst_ip dst_port from_uri method msg:len proto status snd_af snd_ip snd_port snd_proto src_ip src_port to_af to_ip to_port to_proto to_uri uri uri:host uri:port contained syn keyword serCoreValue udp UDP tcp TCP tls TLS sctp SCTP inet INET inet6 INET6 sslv23 SSLv23 SSLV23 sslv2 SSLv2 SSLV2 sslv3 SSLv3 SSLV3 tlsv1 TLSv1 TLSV1 max_len myself contained syn keyword serCoreFunction forward forward_tcp forward_udp forward_tls forward_sctp send send_tcp log error exec force_rport add_rport force_tcp_alias add_tcp_alias udp_mtu udp_mtu_try_proto setflag resetflag isflagset flags bool setavpflag resetavpflag isavpflagset avpflags rewritehost sethost seth rewritehostport sethostport sethp rewritehostporttrans sethostporttrans sethpt rewriteuser setuser setu rewriteuserpass setuserpass setup rewriteport setport setp rewriteuri seturi revert_uri prefix strip strip_tail userphone append_branch set_advertised_address set_advertised_port force_send_socket contained syn keyword serCoreParameter debug fork log_stderror log_facility listen alias auto_aliases dns rev_dns dns_try_ipv6 dns_try_naptr dns_srv_lb dns_srv_loadbalancing dns_udp_pref dns_udp_preference dns_tcp_pref dns_tcp_preference dns_tls_pref dns_tls_preference dns_sctp_pref dns_sctp_preference dns_retr_time dns_retr_no dns_servers_no dns_use_search_list dns_search_full_match dns_cache_init use_dns_cache use_dns_failover dns_cache_flags dns_cache_negative_ttl dns_cache_min_ttl dns_cache_max_ttl dns_cache_mem dns_cache_gc_interval dns_cache_del_nonexp dns_cache_delete_nonexpired dst_blacklist_init use_dst_blacklist dst_blacklist_mem dst_blacklist_expire dst_blacklist_ttl dst_blacklist_gc_interval port statistics maxbuffer children check_via phone2tel syn_branch memlog mem_log memdbg mem_dbg sip_warning server_signature reply_to_via user uid group gid chroot workdir wdir mhomed disable_tcp tcp_children tcp_accept_aliases tcp_send_timeout tcp_connect_timeout tcp_connection_lifetime tcp_poll_method tcp_max_connections tcp_no_connect tcp_source_ipv4 tcp_source_ipv6 tcp_fd_cache tcp_buf_write tcp_async tcp_conn_wq_max tcp_wq_max tcp_rd_buf_size tcp_wq_blk_size tcp_defer_accept tcp_delayed_ack tcp_syncnt tcp_linger2 tcp_keepalive tcp_keepidle tcp_keepintvl tcp_keepcnt tcp_crlf_ping disable_tls tls_disable enable_tls tls_enable tlslog tls_log tls_port_no tls_method tls_verify tls_require_certificate tls_certificate tls_private_key tls_ca_list tls_handshake_timeout tls_send_timeout disable_sctp enable_sctp sctp_children sctp_socket_rcvbuf sctp_socket_receive_buffer sctp_socket_sndbuf sctp_socket_send_buffer sctp_autoclose sctp_send_ttl sctp_send_retries advertised_address advertised_port disable_core_dump open_files_limit shm_force_alloc mlock_pages real_time rt_prio rt_policy rt_timer1_prio rt_fast_timer_prio rt_ftimer_prio rt_timer1_policy rt_ftimer_policy rt_timer2_prio rt_stimer_prio rt_timer2_policy rt_stimer_policy mcast_loopback mcast_ttl tos pmtu_discovery exit_timeout ser_kill_timeout max_while_loops stun_refresh_interval stun_allow_stun stun_allow_fp server_id description descr desc loadpath mpath contained syn region serBlock start='{' end='}' contained contains=serBlock,@serCodeElements syn match serRouteBlock '$failure_\|onreply_\|branch_\|event_\|onsend_$\?route$\s*\[[^\]]\+\]$\?' contained contains=serNumber,serString,serIdentifier syn region serRrouteBlockFold matchgroup=serRouteBlock start="$failure_\|onreply_\|branch_\|event_\|onsend_$\?route$\s*\[[^\]]\+\]$\?\s*\n\?{" matchgroup=NONE end="}" contains=serBlock,@serCodeElements syn cluster serCodeElements contains=serCppComment,serHashComment,serNumber,serString,serVariable,serOperator,serStatement,serKeyword,serCoreKeyword,serCoreValue,serCoreFunction,serIdentifier hi def link serCppComment Comment hi def link serHashComment Comment hi def link serTodo Todo hi def link serConfigModparam Function hi def link serConfigModule Keyword hi def link serKeyword Keyword hi def link serCoreKeyword Special hi def link serCoreValue Special hi def link serCoreFunction Function hi def link serRouteBlock Type hi def link serRrouteBlockFold Type hi def link serIdentifier Identifier hi def link serSpecial Special hi def link serCoreParameter Keyword hi def link serOperator Operator hi def link serStatement Conditional hi def link serNumber Number hi def link serVariable Identifier hi def link serString String hi def link serStringEscape Special let b:current_syntax = "ser"

14 years, 10 months

[Kamailio-Users] hangup problem

by Chandrakant Solanki

hi I am using.. Asterisk : 1.6.0.5 Kamailio : 1.5.0 Here, is network diagram ... 172.18.100.10/20/30 ============ 192.168.1.68 ========================== 192.168.1.70 (SIP Phone Register on this IP) (Kamailio IP) (Asterisk Server) And here link for kamailio file I have registered 111 and 222 user on asterisk (192.168.1.70)... and call to kamailio user (1212(a)domain.com)... call established successfully.. but sip phone is not hangup.. As well as i call from kamailio user like 1212 to 2121 ... call established .. but sip phone not hangup.. Help me out.... Thanks in advance -- Regards, Chandrakant Solanki

14 years, 10 months

[Kamailio-Users] Solved RE: [OpenSIPS-Users] Mediaproxy relay error: 'module' object has no attribute 'Interface'

by CSB

> Hi, > On 26 May 2009, at 22:18, CSB wrote: > >> > >> Perhaps you do not have the zope.interface module installed? > >> > >> I'm not sure which linux distribution you are using, but I'm > guessing > >> from the rpm command that it is some RedHat derivative. You can save > >> yourself from these sort of dependency problem by using Debian and > >> installing MediaProxy2 directly from our repository. > >> > > Unfortunately we have a number of servers all running CentOS so to > > change is > > not so easy. zope.interface looks like it's installed - see my other > > post. > > > > Regards > > > > Cameron > > The traceback shows the problem is in twisted.names, so I would > probably suspect there is something wrong with that version. I don't > understand the version number you quote of that anyway, 0.3.0 seems to > be very different from the rest. Please try to upgrade anything > related to twisted to use the latest version and see if you still have > problems. > I removed the python-twisted packages, installed Twisted from source and the error no longer occurs. Thanks for the advice. Now I just need to upgrade my EC2 kernel... Cameron

14 years, 10 months

Problem with 'break' in a 'Switch' body

by Edson - Lists

Hi, Guys... I use a 'switch' block to drive decisions after a failed 'lookup' (on router-block). In theory all Ok, but.... In the body of this switch, if I use a 'break' inside an 'if' it gives me error, saying that it's not allowed. See below the code. What am I doing wrong? Edson. ======================================================== route[1] { if (!lookup("location") { switch ($retcode) { case -1: case -3: if ('situation A') { t_on_failure("1"); break; } else { if ('condition b') { if ('condition b.1') { t_on_failure("2"); break; }; }; }; exit; case -2: sl_send_reply("500", "Internal lookup error"); exit; } } if (!t_relay()) { sl_reply_error(); } exit; }

14 years, 10 months

Re: [Kamailio-Users] Question regarding kamailio transaction processing.

by Siddhardha Garige

Daniel, We are testing kamailio in "edge proxy". Kamailio routes traffic in between SIPP clients and SIP registrar. Here is a link to my test network layout. http://luminepixels.com/tmp/kamailio_load_testing.jpg We did not see many retransmissions with Registration load running alone. With Call load and registration together, only registration requests are being retransmitted. Call requests are not. -Sid -Sid "May the light be with you." ______________________________________________ Siddhardha Garige www.luminepixels.com --- On Thu, 5/28/09, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: From: Daniel-Constantin Mierla <miconda(a)gmail.com> Subject: Re: [Kamailio-Users] Question regarding kamailio transaction processing. To: users(a)lists.kamailio.org Date: Thursday, May 28, 2009, 4:19 AM Hello, On 05/28/2009 01:12 AM, Iñaki Baz Castillo wrote: > El Miércoles, 27 de Mayo de 2009, Siddhardha Garige escribió: > >> Here is our question. If number of transactions in kamailio memory >> contributes to processing delay should not it affect both REGISTRATION and >> CALL transactions equally? Why only REGISTRATION are getting affected while >> calls are fine without any retransmissions. >> > > Registration involves storage in memory and/or database, also a lookup in > memory or database to retrieve all the contacts registered for that AoR. Could > it be the reason? > what db_mode is used for usrloc module? Are you doing authentication? Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com/ _______________________________________________ Kamailio (OpenSER) - Users mailing list Users(a)lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

14 years, 10 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2009