sr-users April 2009

sr-users@lists.kamailio.org

83 participants
109 discussions

[Kamailio-Users] Kamailio and Jabberd in same server

by Joao Gomes Pereira

Hello Is it possible to use JabberD and Kamailio (with XMPP Component Mode) in the same server? Thanks Joao Pereira -- StarTel - A Rede Livre Joao Gomes Pereira www.startel.pt +351 304500650 sip: gomespereira(a)startel.pt

15 years

[Kamailio-Users] Get transaction ID

by kévin l'heveder

Hi all! I'd like to use the *t_reply* *MI* *function*, but one of the parameter is * 'trans_id'* and i don't know how to get it? thanks. Koon

15 years

[Kamailio-Users] removal of tag-param in To Header

by sasirekha jaganathan

Hi , Can anyone point me to the function used to remove a tag in To Header field. For ex: To:sss@sss.com;tag=09888 In this case how to remove the tag param. Thanks Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/

15 years

Re: [Kamailio-Users] another instance of kamailio on the same machine >

by vallimamod abdullah

Hello Juan, On Wed, 1 Apr 2009 06:35:35 -0700 (PDT) Juan Perez <jperezsip2008(a)yahoo.com> wrote: > > we will use a different machine but we are limited with hardware now so in the mean time [and not for production traffic] we need to use the same hardware for > more than one instance to test some stuff > thank you guys If you look at a clean way to have multiple kamailio instances in one physical server, you should look at linux-vserver which work great under debian (http://wiki.debian.org/LinuxVserver) This will allow you to have separate environment for each instance with different IPs and no overhead. We use it for a long time now without problem. Don't hesitate to contact me if you need more informations. Regards, -vma .

15 years

[Kamailio-Users] remove_uri_param(param)?

by jh＠tutpro.com

siputils has function uri_param that can us used to check if r-uri has a given parameter. how about a function remove_uri_param(param) that would remove from r-uri the given parameter? does any efficient (non regex) means exist to achieve it? -- juha

15 years

[Kamailio-Users] Processing ACK.

by Carlos A. Alvarez

I am having an issue while setting up Kamailio. I using the carrierroute modules to process calls between carriers. The configuration works great. However I have and issue. On the SIP messages We are forcing all the media through an RTP proxy, however my issue has to do with the Contact field on the Message Header. While I am able to use force_rtp_proxy to replace the contact and connection fields on the SDP part of the message, I can seem to modify the Contact on the Header part. I tried using subst to change the Contact:, and while I was partly successful, it seems the ACKs going from one carrier to another are getting messed up and throwing Kamailio into a loop. We are trying to avoid providing Contact: information to our carriers. Basically keeping them from know about each other. Any ideas/help will be Greatly appreciated.

15 years

[Serusers] running rtpproxy on quad core processors

by Mundiline

Hi, I would like to run rtpproxy 1.2.0 on a server with Quad-core dual Xeon processor and load balance the load across the 4 processors. Do you know how do I enable this feature pls. ( I am not an expert in this field so keep it simple pls. thanks) Thanks in advance Regards, Tony

15 years

[Serusers] Running multiple instances of rtpproxy? How to set up in SER?

by Frank Durda IV

I have reached the point where a single instance of rtpproxy is about maxed-out, showing that its single process is comsuming 85% or so and climbing of the CPU available. That works out to about 600 standing calls, the bulk of which are G.711. This is a multi-processor/core system and I have several other CPUs not really doing anything, so I would like to start up multiple instances of rtpproxy, which rtpproxy says it can do, controlling them via AF_INET sockets instead of the default AF_UNIX. How you set up rtpproxy for multiple instances seems reasonably straightforward, but what you do on the SER side to let it know that these additional copies of rtpproxy exist and how you or SER divides call load between them is less clear. Is there any documentation or examples showing this done, or better still, someone with a working ser.ctl file who would be willing to show at least that part of their configuration? Ideally, I'm looking for a case where calls are divided among rtpproxies regardless of where they came from or where they are going, as I have one particular call source/destination pair that is absurdly large compared to all others, and that so it in particular has to be distributed across across multiple rtpproxies. Thanks in advance!

15 years

[Kamailio-Users] Force core dump

by catalina oancea

Hello Can anybody please help me on how to force a core dump if a child crashes? I see this: /usr/sbin/kamailio[12328]: INFO:core:handle_sigs: child process 12379 exited by a signal 11 /usr/sbin/kamailio[12328]: INFO:core:handle_sigs: core was not generated /usr/sbin/kamailio[12328]: INFO:core:handle_sigs: terminating due to SIGCHLD /usr/sbin/kamailio[12393]: INFO:core:sig_usr: signal 15 received And if I run with gdb, it says 'Program exited normally' Has anybody managed to make a core dump in this case? Thanks Catalina

15 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2009