sr-users September 2008

sr-users@lists.kamailio.org

95 participants
155 discussions

[Kamailio-Users] Carrierroute module: preffix qty?

by Pablo Bertuzzi

Hi Forum, I want to use carrierroute to terminate 50,000 preffixes to a PSTN gw and block 100,000. So I created 50,000 records with gw ip as rewrite_host. However I only was able to start kamailio with no more than about 2,200 records in carrierroute mysql table. Is it possible to use carrierroute in such a way? Find below log with error: Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:bind_data_loader: use database as configuration source Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:load_route_data: name default, id 0, trees: 1 Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:add_carrier_tree: add carrier default Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:add_carrier_tree: carrier default not found, add it Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:add_tree: tree default has internal id 0 Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: INFO:carrierroute:add_carrier_tree: created carrier tree: default, with id 0 and 1 trees Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:db_mysql:db_mysql_convert_row: no private memory left Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:db_mysql:db_mysql_convert_rows: error while converting row #2282 Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:db_mysql:db_mysql_convert_result: error while converting rows Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:db_mysql:db_mysql_store_result: error while converting result Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:core:db_do_query: error while storing result Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:carrierroute:load_route_data: Failed to query database. Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:carrierroute:prepare_route_tree: could not load routing data Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:carrierroute:mod_init: could not prepare route tree Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:core:init_mod: failed to initialize module carrierroute Sep 29 13:36:22 sip-proxy /usr/local/sbin/kamailio[2569]: ERROR:core:main: error while initializing modules

15 years, 6 months

[Kamailio-Users] Developing Sh interface between the AS(OPENSER/OPENSIPS)and HSS

by suresh tattikota

hi all I am using the Openser(Opensips) as apllication server . i am developing Sh interface between the AS and HSS. For developing the Sh interface i am using the CDiameterpeer , here i am getiing memory and locking errors. And for using the CDiameterpeer as standalone library what steps i have to follow ... Thanks suresh :)

15 years, 6 months

[Kamailio-Users] openser.cfg children=4

by Asim Riaz

Hi, my openser.cfg is configured for childern=4, but I am seeing child processes? Thanks Asim Riaz

15 years, 6 months

[Kamailio-Users] About presence_dialoginfo - RR in figure 2

by Iñaki Baz Castillo

Hi, figure 2 of http://www.kamailio.org/docs/modules/devel/presence_dialoginfo.html shows the presence server sending the NOTIFY directly to the watcher. Is it possible to send the NOTIFY through the proxy? Well, since NOTIFY is in-dialog it's just needed that the proxy does RR in the initial SUBSCRIBE before forwarding it to presence server, am I right? Thanks. -- Iñaki Baz Castillo

15 years, 7 months

[Kamailio-Users] LCR vs Carrierroute and SRV Support Inquirer

by Krom

Hello, I am/will be a newbie to 1.3.x and beyond and have a question regarding a new requirement of two of my upstream providers. We have been running 1.1.1-notls since it was released. We have been in the mindset of, "if it's not broken, don't fix it". But our upstream providers are now telling us to move to DNS/SRV for signaling outbound - for good reason. We have been using LCR for carrier/gateway selection and for RURI manipulation prior to relaying to a cluster of session boarder controllers. As you know the DB table for LCR only supports integers in the gw table for ip_addr. I have been reading up on 1.2.x and 1.3.x to upgrade to a solution that would allow us to stay within the same call processing (script) design, but still support the new upstream requirement. I noticed the carrierroute table rewrite_host column is string. Could this be used to satisfy my needs of manipulating the RURI for an IP where the carrier still uses a list of gateway IP's to try and use the DNS/SRV domain name where the carrier requires the use for SRV look-up? The session boarder controllers will conduct the SRV look-up after receiving the relayed message from Kamailio, it is just getting the domain name on the RURI instead of IP address that I am looking to accomplish. Will the (new to me) carrierroute module assist in this effort or is there another way that I am totally missing? Figured I would ask the gurus before following Alice down the rabbit hole. -- Thanks, -- Kyle

15 years, 7 months

[Kamailio-Users] How to prevent - Same username used on multiple sip phones

by Ali Jawad

Hi On my openser I can logon with the same username on two different softphones. How can I prevent the same username from being used on multiple devices. With Regards

15 years, 7 months

[Serusers] how-to AVP from radius load

by Samuel Muller

Hello, I've a single question about AVPs : how can I use them when loaded from radius_load_attr ? example : the 0123452000 is the caller, I want to use an acl to block him. => in my radius user config : 0123451010(a)sip.dot.com User-Password = "0000" User-Name = "0123451010(a)sip.dot.com", SER-UID = "0123451010(a)sip.dot.com", SER-DID = "1", SER-From-UID = "0123451010(a)sip.dot.com", SER-From-DID = "1", SER-Digest-Username = "0123451010", SER-Digest-Realm = "sip.dot.com", SER-Uri-User = "0123451010(a)sip.dot.com", SER-Attr = "acl:pstn", SER-Attr = "asserted-id:0123451010", SER-Attr = "phone:0123451010", SER-Attr = "lang:fr" => in the SER (v2.0.0) : if (!radius_load_attrs("$fu", "@f.uri")) { sl_reply("403", "Radius attributes not found"); exit; } if ( $acl == "pstn" ) { sl_reply("401", "Unauthorized"); exit; } I tried too " $fu.acl ", " set_attr function, ... it seems I can't use SER-Attr as a variable. in the debug (dump_attrs) : ... ser[28670]: r_INBOUND: => dump_attrs() ser[28670]: INFO: avp.c:542: class=GLOBAL ser[28670]: AVP["lang"]="en" ser[28670]: INFO: avp.c:552: track=FROM class=DOMAIN ser[28670]: AVP["did"]="1" ser[28670]: AVP["digest_realm"]="sip.dot.com" ser[28670]: INFO: avp.c:562: track=TO class=DOMAIN ser[28670]: AVP["did"]="1" ser[28670]: AVP["digest_realm"]="sip.dot.com" ser[28670]: INFO: avp.c:572: track=FROM class=USER ser[28670]: AVP["uid"]="0123451010(a)sip.dot.com" ser[28670]: AVP["acl"]="pstn" ser[28670]: AVP["asserted-id"]="0123451010" ser[28670]: AVP["lang"]="fr" ser[28670]: AVP["phone"]="0123451010" ser[28670]: AVP["acl"]="pstn" ser[28670]: AVP["asserted-id"]="0123451010" ser[28670]: AVP["lang"]="fr" ser[28670]: AVP["phone"]="0123451010" ser[28670]: INFO: avp.c:582: track=TO class=USER ser[28670]: AVP["acl"]="pstn" ser[28670]: AVP["asserted-id"]="0123451005" ser[28670]: AVP["lang"]="fr" ser[28670]: AVP["phone"]="0123451005" ser[28670]: AVP["acl"]="pstn" ser[28670]: AVP["asserted-id"]="0123451005" ser[28670]: AVP["lang"]="fr" ser[28670]: AVP["phone"]="0123451005" ser[28670]: INFO: avp.c:592: track=FROM class=URI ser[28670]: AVP["uac_nat"]=1 ser[28670]: AVP["account"]="yes" ser[28670]: INFO: avp.c:602: track=TO class=URI ser[28670]: INFO: No AVP present ... If anyone has tips to help me, many thanks ! I'm sure there's something who replaces the old group_radius module, but which one or how to create SER-Attr $grp ? Many thanks, -- Samuel MULLER sml(a)720.fr

15 years, 7 months

[Kamailio-Users] new CDRTool release 6.6.8

by Adrian Georgescu

Hello, The software includes critical bug fixes for parallel prepaid calls. The software can be downloaded from: http://download.ag-projects.com/CDRTool/ Changelog since 6.6.3 cdrtool (6.6.8) unstable; urgency=low * Log debit balance to prepaid_history table cdrtool (6.6.7) unstable; urgency=low * Do not debit balance for inexistent prepaid sessions cdrtool (6.6.5) unstable; urgency=low * Fixed purging of expired prepaid sessions cdrtool (6.6.4) unstable; urgency=low * Added links to Prepaid calls and quota in the main menu * Fixed showFooter() when exporting csv files from rating page * Fixed prepaid table mysql schema Regards, Adrian

15 years, 7 months

[Kamailio-Users] kamailio 1.4.1 and mediaproxy 1.9.1

by toly

Greetings, I'm looking for the short answer, most likely no way. Thanks, Toly -- View this message in context: http://www.nabble.com/kamailio-1.4.1-and-mediaproxy-1.9.1-tp19728623p197286… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

15 years, 7 months

[Kamailio-Users] Disable transfers (REFER) on Kamailio

by Diego Zuaneti Arruda

Hi all, It's possible to disable any transfers (blind or attended) on Kamailio ? Thanks. Diego.

15 years, 7 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2008