sr-users July 2008

sr-users@lists.kamailio.org

147 participants
206 discussions

[Serusers] Modified Document about Solaris10_plus_SER-0.9.6_plus_SERweb-0.9.6
by muhammad akl 13 Jul '08

13 Jul '08

Hey All, well, more than one week i sent an e-mail to serusers mailing list about iptel's documentation outdated and asked peoples that who can help me in writing some topics related specifically to solaris10 os , but didn't get any response about that. so as usual do it myself and since i have rewitten this tutorial from ground i will update it frequently this new updated version include : 1- installing coolstack package for solaris and configuring it 2- installing SER version 0.9.6 3-installing SERweb version 0.9.6 thins TBD : 1-installing more configuration files like working with nat, pstn 2-installing SEMS and configure it to work with SER 3-integrate SER to work together with Asterisk for sems with ser i need really who can help me to do that and for the rest points i'll try my best to make them to real heres the document : http://muhammad.akl.googlepages.com/Solaris10-SER.0.9.6-SERweb-0.9.6.pdf the document is still in beta version so suggestions, corrections and feedbacks are welcomed. BR muhammad

4 5

Re: [Serusers] usrloc won't work after a couple days?
by lin9k＠yahoo.com 13 Jul '08

13 Jul '08

Hi Martin, Thanks for replying. I am using ser-0.9.6. How do I check the period of silence? I have also noticed that alias cannot be recorded/updated into mysql too. Looks like the problem is as you were referring. Which version has the fix? Where is the culprit? Ling ----- Original Message ---- From: Martin Hoffmann <hn(a)nvnc.de> To: lin9k(a)yahoo.com Cc: serusers(a)lists.iptel.org Sent: Tuesday, July 1, 2008 11:33:58 PM Subject: Re: [Serusers] usrloc won't work after a couple days? lin9k(a)yahoo.com wrote: > > I have setup ser to run with mysql. At beginning, it worked fine that > the mysql/ser/location table got the correct update. However, after 3 > days the table won't get updated. When I enable the mysql log I cannot > see any updating or inserting into that table. User registration is > still working fine but just not get updated into the location table. > Also, server_monitoring tables are working fine. Do you have a longer period of silence in between? I seem to remember that there was a problem with the connection between SER and MySQL getting shut down and SER not reconnecting. Dunno if this was in the SER version you are using, though. Regards, Martin

3 2

[Serusers] Solaris10_plus_SER-0.9.6_plus_SERweb-0.9.6
by Do Nguyen Ha 11 Jul '08

11 Jul '08

Hi Muhammad, > > On Thu, Jul 10, 2008 at 5:17 PM, muhammad akl <muhammad.akl(a)gmail.com> > wrote: >> This new updated version include : >> >> 1- installing coolstack package for solaris and configuring it >> 2- installing SER version 0.9.6 >> 3-installing SERweb version 0.9.6 thanks for great help the docs for SER is out date, that is why alot of people need help SER is stable but docs is not good for someone starting Openser is good docs for it Thanks

2 1

[OpenSER-Users] ipv4 and ipv6 intercommunication
by 苗杰 10 Jul '08

10 Jul '08

I'm a beginner at openser. What does the variable 'af' stand for?And what is the value of the optional? Thanks! 313 # Comment out three lines below if you want 314 # RTP for IPv4->IPv4 calls to go directly 315 # between UAs 316 if (af == inet) { 317 force_rtp_proxy("faii"); 318 t_on_reply("1"); 319 } 320 # proxy session from a Internal IPv4 321 # phone to a External IPv6 address 322 if (af == inet6) { 323 force_rtp_proxy("faie"); 324 t_on_reply("1"); 325 } 326 } 327 328 else if (lookup("location_inet6")) { 329 # proxy session from a External IPv6 330 # phone to a Internal IPv4 address 331 if (af == inet) { 332 force_rtp_proxy("faei"); 333 t_on_reply("1"); 334 } 335 336 # Comment out three lines below if you want 337 # RTP for IPv6->IPv6 calls to go directly 338 # between UAs 339 if (af == inet6) { 340 force_rtp_proxy("faee"); 341 t_on_reply("1"); 342 }

2 1

[OpenSER-Users] IPv6 and IPv4
by 苗杰 10 Jul '08

10 Jul '08

313 # Comment out three lines below if you want 314 # RTP for IPv4->IPv4 calls to go directly 315 # between UAs 316 if (af == inet) { 317 force_rtp_proxy("faii"); 318 t_on_reply("1"); 319 } 320 # proxy session from a Internal IPv4 321 # phone to a External IPv6 address 322 if (af == inet6) { 323 force_rtp_proxy("faie"); 324 t_on_reply("1"); 325 } 326 } 327 328 else if (lookup("location_inet6")) { 329 # proxy session from a External IPv6 330 # phone to a Internal IPv4 address 331 if (af == inet) { 332 force_rtp_proxy("faei"); 333 t_on_reply("1"); 334 } 335 336 # Comment out three lines below if you want 337 # RTP for IPv6->IPv6 calls to go directly 338 # between UAs 339 if (af == inet6) { 340 force_rtp_proxy("faee"); 341 t_on_reply("1"); 342 }

3 2

[OpenSER-Users] fix_nated_register() Error.
by Ali Jawad 10 Jul '08

10 Jul '08

Hi All I am getting this error on Openser 1.3 Jul 10 11:28:31 [20126] ERROR:nathelper:fixup_fix_nated_register: you must set 'received_avp' parameter. Must be same value as parameter 'received_avp' of registrar module Jul 10 11:28:31 [20126] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 386 Jul 10 11:28:31 [20126] ERROR:core:main: failed to fix configuration with err code -1 I used the example from nat-traversal.cfg I do believe the error is initiated from this section route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } Please advice.

3 6

[OpenSER-Users] ipv6 parsing error
by Andhika Gannesha Gemilang 09 Jul '08

09 Jul '08

Hi, Im trying to setup ipv6 for my openser. i add this line in my openser.cfg *LIsten=udp:[2004:fa22:337:4::81]:5060 Listen=tcp:[2004:fa22:337:4::81]:5060 *and then when im trying to register with my sip phone, i got these line: ERROR:core:parse_uri: bad char ':' in state 3 parsed: <sip:2004:fa22> (13) / <sip:2004:fa22:337:4::81> (23) Jul 8 12:02:52 [2977] ERROR:core:parse_sip_msg_uri: bad uri <sip:2004:fa22:337:4::81> Jul 8 12:02:52 [2977] WARNING:core:do_action: error in expression Jul 8 12:02:52 [2981] ERROR:core:parse_uri: bad char ':' in state 3 parsed: <sip:2004:fa22> (13) / <sip:2004:fa22:337:4::81> (23) Jul 8 12:02:52 [2981] ERROR:registrar:extract_aor: failed to parse Address of Record Jul 8 12:02:52 [2981] ERROR:registrar:save: failed to extract Address Of Record and these from tcpdump: 12:11:52.267529 IP6 2004:fa22:337:4::84.sip > 2004:fa22:337:4::81.sip: SIP, length: 488 12:11:52.272578 IP6 2004:fa22:337:4::81 > ff02::1:ff00:84: ICMP6, neighbor solicitation, who has 2004:fa22:337:4::84, length 32 12:11:52.273059 IP6 2004:fa22:337:4::84 > 2004:fa22:337:4::81: ICMP6, neighbor advertisement, tgt is 2004:fa22:337:4::84, length 32 12:11:52.273068 IP6 2004:fa22:337:4::81.sip > 2004:fa22:337:4::84.sip: SIP, length: 500 12:11:52.469341 IP6 2004:fa22:337:4::84.sip > 2004:fa22:337:4::81.sip: SIP, length: 671 12:11:52.470127 IP6 2004:fa22:337:4::81.sip > 2004:fa22:337:4::84.sip: SIP, length: 445 12:11:57.264948 IP6 fe80::213:20ff:feac:ce4f > 2004:fa22:337:4::81: ICMP6, neighbor solicitation, who has 2004:fa22:337:4::81, length 32 also, i have disabled the ip6tables. any assistance would be so helpful to me thankyou,

4 7

[OpenSER-Users] Is there a REFER function on Openser
by mark morreny 09 Jul '08

09 Jul '08

Hi, I am looking for a REFER function which can 1) redirect UA to another sip server and 2) get openser out of the hoop. Does Openser has this kind of feature? Thanks for all your help. Mark

2 1

[OpenSER-Users] ERROR: Error opening OpenSER's FIFO /tmp/openser_fifo
by suresh tattikota 09 Jul '08

09 Jul '08

hi all i am trying to add a module pua to Openser using loadmodule "pua.so" in openser.cfg i am geting some errors like this [root@info ~]# *openserctl moni* database engine 'MYSQL' loaded Control engine 'FIFO' loaded ERROR: Error opening OpenSER's FIFO /tmp/openser_fifo ERROR: Make sure you have line 'fifo=/tmp/openser_fifo' in your config please help me regarding this thank u

2 1

[OpenSER-Users] About Openser Message
by Ali Jawad 09 Jul '08

09 Jul '08

Hi All hi when I do a call on Openser it shows the following on my softphone CallStatus Message: 183 SESSION PROGRESS;Ringing-tone=TRUE; Can this message be changed, if so how? Thanks

1 0

← Newer
1
...
12
13
14
15
16
17
18
...
21
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2008