sr-users June 2008

sr-users@lists.kamailio.org

124 participants
230 discussions

by mark morreny

Hi, I am working on configuring RTP Proxy. The problem I am having is that Openser will use rtp proxy to serve the rtp session even when both UAs and Openser are withing the same LAN. Here is the openser.cfg I used: if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; Hre is a INVITE SIP packet from one of the UA: U 192.168.1.101:5062 -> 192.168.1.104:5060 INVITE sip:1006@192.168.1.104 <sip%3A1006(a)192.168.1.104> SIP/2.0..Via: SIP/2.0/UDP 192.168.1.101:5062;branch=z9hG4b K-220120f9..From: "1005" <sip:1005@192.168.1.104<sip%3A1005(a)192.168.1.104>>;tag=490c5d623d5acbf5o0..To: "1006" <si p:1006@192.168.1.104 <p%3A1006(a)192.168.1.104>>..Call-ID: 3e5720e1-bf774681@192.168.1.101..CSeq: 102 INVITE..Max-F orwards: 70..Proxy-Authorization: Digest username="1005",realm=" 192.168.1.104",nonce="48 4b3b51ea052f45482ef4fd26f00a14239c3465",uri="sip:1006@192.168.1.104<sip%3A1006(a)192.168.1.104> ",algorithm=MD5,respo nse="d46ea7cd9781b9a1493e6eaf7b978086",qop=auth,nc=00000001,cnonce="676aa6d8"..Contact: "1005" <sip:1005@192.168.1.101:5062>..Expires: 240..User-Agent: Sipura/SPA921-4.1.10(b). .Content-Length: 401..Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER..Con tent-Type: application/sdp....v=0..o=- 26093424 26093424 IN IP4 192.168.1.101..s=-..c=IN IP4 192.168.1.101..t=0 0..m=audio 16474 RTP/AVP 0 2 4 8 18 96 97 98 101..a=rtpmap:0 PCM U/8000..a=rtpmap:2 G726-32/8000..a=rtpmap:4 G723/8000..a=rtpmap:8 PCMA/8000..a=rtpmap:18 G729a/8000..a=rtpmap:96 G726-40/8000..a=rtpmap:97 G726-24/8000..a=rtpmap:98 G726-16/800 0..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=ptime:30..a=sendrecv.. # I even tested with nat_uac_test("1") and nat_uac_test("2") and nat_uac_test("16") seperately and found that nat_uac_test("1") is return true, meaning that Openser detects a RFC1918 address in the Contact field. If Openser is in the same LAN as the UA, then no rtp proxy should be utilized. Could someone please help me out to configure rtp proxy correctly? I would appreciate any help in solving this problem. Regards, Mark

15 years, 11 months

Re: [OpenSER-Users] Dialog table "state" value

by Stanisław Pitucha

----- "David Villasmil" <david.villasmil.work(a)gmail.com> napisał: > Although I've looked and looked for any info on the different values > of the "state" column of the dialog table, I can't find it anywhere, > What does it mean? >From branches/1.3/modules/dialog/dlg_hash.h: #define DLG_STATE_UNCONFIRMED 1 #define DLG_STATE_EARLY 2 #define DLG_STATE_CONFIRMED_NA 3 #define DLG_STATE_CONFIRMED 4 #define DLG_STATE_DELETED 5 Unconfirmed means that only INVITE was sent. Early - after any 1XX response Confirmed_na - after 2XX Confirmed - after ACK response after errors (or BYE) state switches to deleted. At least that's what I understood from source and observing database... Stan

15 years, 11 months

[OpenSER-Users] CDRTool: How to avoid invoices for answered calls of duration 0

by Adrian Georgescu

If the call has 0 seconds duration, CDRTool does not calculate a cost, it is zero. The connection fee applies only if the call has a positive duration. Adrian >>>>>>>>>>>> Hi, RFC3261 says that a UAC should send inmediately a BYE after a 2XX response if the offer in the 2xx response is not acceptable (when the INVITE has no body). So this will generate an answered call of duration 0 (probably). But if the CDRTool rate has "connect" fixed amount then this invalid call will have cost. I think this shouldn't have cost since it's a SIP protocol issue (accepting a call and sending a BYE inmediately) but not an human decision. Opinions?

15 years, 11 months

[OpenSER-Users] Dialog table "state" value

by David Villasmil

Hello all, Although I've looked and looked for any info on the different values of the "state" column of the dialog table, I can't find it anywhere, What does it mean? Thanks David

15 years, 11 months

[OpenSER-Users] storing extra info in Dialog table

by David Villasmil

Hello all Is it possible to store extra info in the dialog table? For instance, I want to add a column, named time_in, and I want the dialog module to add to the fields inserted a "now()" Is this possible? Thanks David

15 years, 11 months

[OpenSER-Users] AVP Setup

by Ali Jawad

Dear All I am trying to do the following: I want to enable/disable users, to do that I added a column named status to the subscribers table. It contains a string saying enabled or disabled. I did add the following info to the config file. # ----- AVP params -------- modparam("avpops", "avp_url", "mysql://openser:0o0o0o0o0@xx.xx.xx.xx/openser") modparam("avpops","avp_table","subscriber") modparam("avpops","db_scheme", "scheme1:username_col=username;value_col=status;value_type=string;table= subscriber") And in the route statement I added "This is a sample provided by MPWizard..thanks for that" however it apparently needs some changes to work for me. if (avp_db_load("$tU", "$avp(s:disabled)")) { xlog("L_INFO", "User is local but disabled, denying registration") } The error I get in the log file is as follows: Jun 6 11:20:38 [21919] ERROR:mysql:db_mysql_submit_query: driver error: Unknown column 'value' in 'field list' Jun 6 11:20:38 [21919] ERROR:mysql:db_mysql_query: error while submitting query Jun 6 11:20:38 [21919] ERROR:avpops:ops_dbload_avps: db_load failed Any suggestions please. Thanks to all of you guys. For all the support now and before ..you rock.

15 years, 11 months

Re: [OpenSER-Users] Openser Multi-home

by Bogdan-Andrei Iancu

Note that there are two way to configure openser in multi-home envs. : - either enable mhome param and openser will autodetect the outbound interface based on the destination - quite slow - either use force_send_socket() function if the msg flow is clear and you know from the script what interface should be used - very fast Regards, Bogdan jvelev(a)avangardsolutions.com wrote: > That fixed the problem. 10x > > Regards, > J.Velev > > On Thu, 2008-06-05 at 20:11 +0300, Bogdan-Andrei Iancu wrote: > >> Hi, >> >> have you enabled the mhomed param? >> http://www.openser.org/dokuwiki/doku.php/core-cookbook:1.3.x#mhomed >> >> Regards, >> Bogdan >> >> jvelev(a)avangardsolutions.com wrote: >> >>> Hello all >>> >>> I'm trying to run OpenSER on a multi-home environment. OpenSER listens >>> on the real IP and on the private one. The main idea is to proxy traffic >>> coming from real IPs to the internal network. >>> >>> OpenSER tries to reach the internal IPs talking to them with it's REAL >>> IP despite it's directly connected to the internal network and can use >>> it's private IP. >>> >>> Comments & Ideas appreciated. >>> >>> >>> >>> >>> >>> >> > > >

15 years, 11 months

[OpenSER-Users] CDRTool: How to avoid invoices for answered calls of duration 0

by Iñaki Baz Castillo

Hi, RFC3261 says that a UAC should send inmediately a BYE after a 2XX response if the offer in the 2xx response is not acceptable (when the INVITE has no body). So this will generate an answered call of duration 0 (probably). But if the CDRTool rate has "connect" fixed amount then this invalid call will have cost. I think this shouldn't have cost since it's a SIP protocol issue (accepting a call and sending a BYE inmediately) but not an human decision. Opinions? 13.2.2.4 2xx Responses -- Iñaki Baz Castillo ibc(a)in.ilimit.es

15 years, 11 months

Re: [OpenSER-Users] [OpenSER-Devel] Memory dump for OpenSER 1.3.1 which slowly leaks memory

by Julian Yap

Bogdan, I'll need to check out the shmem statistics. I mean, this is the memory output for the OpenSER processes having run for about 24 hours. Does it look right?: # ps -C openser -o vsz,rss VSZ RSS 234124 12636 369940 159392 369940 158840 369940 158860 370340 159220 369804 158696 370068 158932 370204 159048 370464 159344 234124 20904 234124 9484 234128 7952 234124 7948 234124 7880 234124 7880 234124 7880 234124 7880 234124 7880 234124 7880 234124 7880 234124 8332 Here are the modules I'm using. Not sure if any have a dependency on libxml: loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "usrloc.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "maxfwd.so" loadmodule "mi_fifo.so" loadmodule "nathelper.so" loadmodule "perl.so" loadmodule "registrar.so" loadmodule "rr.so" loadmodule "textops.so" loadmodule "uri.so" Thanks, Julian On Wed, May 7, 2008 at 5:22 AM, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote: > Hi Julian, > > Have you tried to use the the shmem statistics to monitor the usage of SHM > memory? > > Both for PKG and SHM memory, openser allocs at startup the whole memory > (depending of how much you configured). Any leak will not be vizible for any > external tools. > > Also, are you using any module that have dependency of libxml library? > > The dump you posted shows more or less nothing more than init phase - > before sending the signal, be sure you select a worker process (use fifo > command "ps" to get the list and types of processes). > > Regards, > Bogdan > > Julian Yap wrote: > > > > > > > > > On Mon, May 5, 2008 at 10:25 PM, Henning Westerholt > > <henning.westerholt(a)1und1.de> wrote: > > > > > > > On Saturday 03 May 2008, Julian Yap wrote: > > > > I'm currently running OpenSER 1.3.1. > > > > > > > > It seems to slowly leaks memory. > > > > > > > > I've recompiled it as per for debug support in the memory manager: > > > > http://www.openser.org/dokuwiki/doku.php/troubleshooting:memory > > > > > > > > Here is the memory manager dump of the memory status: > > > > http://julianyap.com/download/openser1.3.1_memory_dump20080502.txt > > > > > > > > Any suggestions would be very welcome. > > > > > > Hi Julian, > > > > > > can you give a little more details about your problem? Why do you think > it > > > leaks memory? Do you get memory allocation errors in the logs? > > > > > > Cheers, > > > > > > Henning > > > > > > > > > > Henning, > > > > I don't get any memory allocation errors. > > > > I've recently updated to OpenSER 1.3 branch SVN r4107 but the 'leak' > > still remains. > > > > On a 4GB box, free memory just seems to deplete. > > > > I have a cron job which restarts OpenSER every night but it seems like > > not all the memory is free'd up. Eventually the box needs to be > > rebooted. In the past, running out of memory has led to oom-killer > > killing OpenSER. > > > > For example, I have this cron job: > > */5 * * * * root echo "`date` `free | grep 'buffers/cache'`" >> > > /var/log/free_memory.log > > > > Memory just depletes. Here's where OpenSER was restarted around midnight: > > Sun May 4 23:10:01 HST 2008 -/+ buffers/cache: 2014972 2095204 > > Sun May 4 23:15:01 HST 2008 -/+ buffers/cache: 2027184 2082992 > > Sun May 4 23:20:01 HST 2008 -/+ buffers/cache: 2027604 2082572 > > Sun May 4 23:25:01 HST 2008 -/+ buffers/cache: 2038064 2072112 > > Sun May 4 23:30:01 HST 2008 -/+ buffers/cache: 2037868 2072308 > > Sun May 4 23:35:01 HST 2008 -/+ buffers/cache: 2053184 2056992 > > Sun May 4 23:40:01 HST 2008 -/+ buffers/cache: 2055216 2054960 > > Sun May 4 23:45:01 HST 2008 -/+ buffers/cache: 2075612 2034564 > > Sun May 4 23:50:01 HST 2008 -/+ buffers/cache: 2103232 2006944 > > Sun May 4 23:55:01 HST 2008 -/+ buffers/cache: 2114384 1995792 > > Mon May 5 00:00:01 HST 2008 -/+ buffers/cache: 2117320 1992856 > > Mon May 5 00:05:01 HST 2008 -/+ buffers/cache: 860304 3249872 > > Mon May 5 00:10:01 HST 2008 -/+ buffers/cache: 861208 3248968 > > Mon May 5 00:15:01 HST 2008 -/+ buffers/cache: 868968 3241208 > > > > Here's where I just restarted OpenSER: > > Mon May 5 23:30:01 HST 2008 -/+ buffers/cache: 2041740 2068436 > > Mon May 5 23:35:01 HST 2008 -/+ buffers/cache: 2049572 2060604 > > Mon May 5 23:40:01 HST 2008 -/+ buffers/cache: 2054856 2055320 > > Mon May 5 23:45:01 HST 2008 -/+ buffers/cache: 2065316 2044860 > > Mon May 5 23:50:01 HST 2008 -/+ buffers/cache: 2062248 2047928 > > Mon May 5 23:55:01 HST 2008 -/+ buffers/cache: 2076148 2034028 > > Tue May 6 00:00:01 HST 2008 -/+ buffers/cache: 2087256 2022920 > > Tue May 6 00:05:01 HST 2008 -/+ buffers/cache: 2091300 2018876 > > Tue May 6 00:10:01 HST 2008 -/+ buffers/cache: 2093244 2016932 > > Tue May 6 00:15:01 HST 2008 -/+ buffers/cache: 1382632 2727544 > > > > Thanks, > > Julian > > > > _______________________________________________ > > Devel mailing list > > Devel(a)lists.openser.org > > http://lists.openser.org/cgi-bin/mailman/listinfo/devel > > > > > > > >

15 years, 11 months

Re: [OpenSER-Users] Terminate a call from script

by Bogdan-Andrei Iancu

Hi David, But this is not from script. Is is from outside openser. Regards, Bogdan David Villasmil wrote: > I've done that... > > Using the dialog module, and getting the hash_id and hash_entry, you can: > > :dlg_end_dlg:_reply_fifo_file_ > 342 > 56 > _empty_line_ > > and that ends the call. > > On Thu, Jun 5, 2008 at 3:17 PM, Bogdan-Andrei Iancu > <bogdan(a)voice-system.ro <mailto:bogdan@voice-system.ro>> wrote: > > Hi, > > No, there is no way to terminate the call directly from the script > - at > least not so far :). > > Regards, > Bogdan > > kionez wrote: > > Hi all, > > I'm trying to add a simple priority mechanism in my openser 1.3 > script. > > > > Reading docs i found that dialog module gives a MI command to > terminate > > a call, dlg_end_dlg. Is there any way to terminate a call within a > > script (or a perl script)? I can't find anything on the web, the > only > > way i found is to exec something like "openserctl fifo > dlg_end_dlg $hash > > $id", but it's slower than a direct function inside the main > script.. > > > > thanks in advance > > > > k. > > > > _______________________________________________ > > Users mailing list > > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

15 years, 11 months

← Newer
1
...
16
17
18
19
20
21
22
23
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2008