sr-users May 2008

sr-users@lists.kamailio.org

121 participants
202 discussions

[OpenSER-Users] multiples rows in avp_db_query

by Yazid Hadj Said

Hi, When I use avp_db_query(), I only can access to to the first row by using simply the name of my variable ($avp(s:example)), but if I try to use for example ($avp(s:example[1],$avp(s:example[2]) , it indicate me that this variables isn't set. Regards Yazid

15 years, 11 months

Re: [OpenSER-Users] Problem with Openser-freeradius communication [SOLVED]

by Pete Kay

Hi, I just figured it out. In the radgroupcheck, I had Local as my Value and then I changed it to "Digest", it is working fine now. Thanks a million for all of your help. Regards, Pete

15 years, 11 months

Re: [OpenSER-Users] Problem with Openser-freeradius communication

by Dan-Cristian Bogos

Hi Pete, the Service-Type does matter only if u use it in your auth part. The reason you see "IAPP-Register" is due to radius dictionaries, responsible for translating between numbers and attributes (radius only transports numbers). Regarding the problem of FreeRADIUS not authorizing the requests I think it is a matter of which module do u want to perform that and configure that properly. I would recomed you should running freeradius in debug mode (-X ) and post more info here. Cheers, DanB On Wed, May 28, 2008 at 10:02 AM, Pete Kay <petedao(a)gmail.com> wrote: > Hi, > I am having problem with configuring FreeRadius to authenticate suername > and password. I have tried to test freeradius with a test client and it > works by sending the following message: > Ready to process requests. > User-Name = "1005(a)192.168.1.104" > User-Password = "1234" > Service-Type = Authenticate-Only > NAS-Port = 0 > NAS-IP-Address = 127.0.0.1 > > The message that is sent by Openser is as follows: > Waking up in 1.9 seconds. > User-Name = "1005(a)192.168.1.104" > Digest-Attributes = 0x0a0631303036 > Digest-Attributes = 0x010f3139322e3136382e312e313034 > Digest-Attributes = > 0x022a34383364376265396630623738663734363935343562386366373865303561316161623032633366 > Digest-Attributes = 0x04137369703a3139322e3136382e312e313034 > Digest-Attributes = 0x030a5245474953544552 > Digest-Response = "eb5f24a5563e9c1096855ef8b2c72d2b" > Service-Type = IAPP-Register > X-Ascend-PW-Lifetime = 825241654 > NAS-Port = 5060 > NAS-IP-Address = 127.0.0.1 > > Freeradius can't find the password and is reject users as a result of > that. Also, is the Service-Type supposed to be Authenticate-Only instead? > Is this something to do with my openser.cfg setup that is causing the > problem? > > Thanks in advance for your help. > > Regards, > Pete > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

15 years, 11 months

[OpenSER-Users] Problem with t_relay after next_gw()

by Pete Kay

Hi, After running next_gw(), I can see that the ruri is being modified with the gateway ip as the domain. However, when doing a t_relay, I am getting the following error. From ngrep, I don't see any going package to the gateway ip address, so I am suspecting that the error is internal. before relay ruri = sip:86143455048@64.231.23.234:5060;transport=tcp starting to relay May 29 21:18:04 [12107] ERROR:tm:update_uac_dst: failed to fwd to af 2, proto 2 (no corresponding listening socket) May 29 21:18:04 [12107] ERROR:tm:t_forward_nonack: failure to add branches Could someone tell me what could be the problem? Thenks in advance for all your help. Regards, Pete

15 years, 11 months

[OpenSER-Users] How to differentiate auth level for gateway

by mark morreny

Hi, Assuming I have 3 gateways, GW-a, GW-b, and GW-c. All of them can REGISTER without username and password by having an entry in the trusted table. Is it possible to config Opernser so that GW-a and GW-b can route to GW-c (using INVITE) without username and password, but any INVITEs from GW-c will not be accepted? Thanks in advance for your suggestion. Regards, Mark

15 years, 11 months

[OpenSER-Users] CDRTool question - ShowPrice command changes

by Adrian Georgescu

Dan, you are right and I found the problem. The fix will be available with the next CDRTool release due next week together with Mediaproxy 2.0 Adrian If you need a fix now for your 6.4.1: --- rating_lib-6.4.1.phtml 2008-05-28 18:25:18.000000000 +0200 +++ rating_lib.phtml 2008-05-28 18:27:00.000000000 +0200 @@ -6078,26 +6078,28 @@ $timestamp=time(); } - $application="audio"; - if ($NetFields['application']) $application=$NetFields ['application']; + $CDRStructure=array ( + $this->CDRS->CDRFields ['callId'] => $NetFields['callid'], + $this->CDRS->CDRFields ['aNumber'] => $NetFields['from'], + $this->CDRS->CDRFields ['CanonicalURI'] => $NetFields['to'], + $this->CDRS->CDRFields ['duration'] => $NetFields['duration'], + $this->CDRS->CDRFields ['timestamp'] => time() + ); + + $CDR = new $this->CDRS->CDR_class(&$this->CDRS, & $CDRStructure); + $CDR->normalize(); $Rate = new Rate($this->settings, $this->db); $RateDictionary=array( - 'callId' => $NetFields ['callid'], - 'timestamp' => $timestamp, - 'duration' => $NetFields ['duration'], - 'inputTraffic' => $NetFields ['inputtraffic'], - 'outputTraffic' => $NetFields ['outputtraffic'], - 'DestinationId' => $NetFields ['destinationid'], - 'BillingPartyId' => $NetFields ['from'], - 'domain' => $NetFields ['domain'], - 'gateway' => $NetFields ['gateway'], - 'aNumber' => $NetFields ['from'], - 'cNumber' => $NetFields ['to'], - 'ENUMtld' => $NetFields ['enumtld'], - 'applicationType' => $application, - 'RatingTables' => &$this->CDRS- >RatingTables, + 'duration' => $CDR->duration, + 'callId' => $CDR->callId, + 'timestamp' => $CDR->timestamp, + 'DestinationId' => $CDR- >DestinationId, + 'domain' => $CDR->domain, + 'BillingPartyId' => $CDR- >BillingPartyId, + 'ENUMtld' => $CDR->ENUMtld, + 'RatingTables' => &$this->CDRS- >RatingTables ); $Rate->calculate($RateDictionary);

15 years, 11 months

[OpenSER-Users] CDRTool question - ShowPrice command changes

by Adrian Georgescu

Dan I have no changed anything related to this. Usually I write in the changelog about such dramatic changes. What did you notice and between which versions? Adrian >>>>>>>>> I have noticed that recently ShowPrice behavior has changed, and since did not find it in Changelog I decided to try my shoot over here . There are no more queries based on destination number but DestinationId. Was the support for destination number lost for good, or only temporarily? If that was done, why is "To=" parameter still mandatory? The presence or absence of it does not make any different in queries, as far as I can see. My version: version CDRTool version 6.4.1 Ta, DanB

15 years, 11 months

[Serusers] ser_ctl question

by Steven C. Blair

Hello: I'm just starting to make a serious attempt to build a SER v2 system. SER is built, ser_mysql has been executed and the MySQL tables defined. With mysql -user -p I can access the database with ser_ctl add domain I cannot. I get the following error. DB_URI in serctl.conf was changed to reflect the new password for the ser user. Yet I still get the following error. Any ideas why? ser_ctl domain add myschool.edu ser_ctl: (1045, "Access denied for user 'ser'@'localhost' (using password: YES)"): OperationalError Thanks,steve Senior Network Engineer, Information Systems and Computing Networking and Telecommunications , Suite 221A /6228 University of Pennsylvania Voice:215-573-8396 FAX:215-898-9348

15 years, 11 months

[OpenSER-Users] Save Contact List in Server

by Habib, Yeasin

Hi Everybody, Is there any plug-in available for SIP Communicator to save contact list in the server side. I mean when the SIP Communicator register itself to server the server will save to contact list to its own persistence storage. So the client doesn't need a local copy of contact list. I am using OpenIMSCore and OpenSER. I am just wondering whether this functionality is already available in SIP Communicator or not? If not then how much work has to be done to implement in properly? I am just looking for some idea about this. So that I can make an estimation about this implementation. I am looking forward to hearing from all of you. Best regards Yeasin Habib

15 years, 11 months

[OpenSER-Users] CDRTool question - ShowPrice command changes

by Dan-Cristian Bogos

Guys, I have noticed that recently ShowPrice behavior has changed, and since did not find it in Changelog I decided to try my shoot over here . There are no more queries based on destination number but DestinationId. Was the support for destination number lost for good, or only temporarily? If that was done, why is "To=" parameter still mandatory? The presence or absence of it does not make any different in queries, as far as I can see. My version: version CDRTool version 6.4.1 Ta, DanB

15 years, 11 months

← Newer
1
2
3
4
5
6
7
8
...
21
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2008