sr-users May 2008

sr-users@lists.kamailio.org

121 participants
203 discussions

[OpenSER-Users] parallel forking
by Allan Chao ( 趙廷睿 ) 15 May '08

15 May '08

Dear All: I have found there are some devices can't process two 180 ringing after use OPENSER to do parallel forking, so, i have a idea that is used OPENSER to delete To tag in the To header before relay it , and it works well with eyebeam. But i can't find any spec to support my idea because it is against "early dialog" prograss and my question is how does UE(eyebeam or some client) to create dialog if there is no any To tag in 180 ringing but 200 OK has in the latter ? i think … [View More]

2 1

[OpenSER-Users] cdrtool error: "cannot figure out the destination id ..."
by Adrian Georgescu 15 May '08

15 May '08

You must provision in the destinations table with all prefixes for PSTN destinations (at least all country codes). The software will find the longest match from that table. Adrian >>>>>> Trying cdrtool prepaid rating, got stuck with something. When a request like "MaxSessionTime From=sip:me at example.com To=sip:0031650222 at example.com Duration=7200 Lock=0" is given, cdrtool always return "0", no matter what amount of balance is available in prepaid table. This is … [View More]

2 1

[OpenSER-Users] username mangling
by David Terry 14 May '08

14 May '08

Hi Openser, My question is regarding case-handling of SIP usernames with Openser 1.3.1 presence modules. I'm using a stand-alone presence server with pua/pua_usrloc modules. This is the test case: 1. user "sip:1234@10.10.90.51" sends SUBSCRIBE for user "sip:Jane@10.10.90.51" 2. user "sip:Jane@10.10.90.51" sends REGISTER After 2, watcher does not receive NOTIFY from Openser/presence. DB contents is as follows: active_watchers/presentity_uri contains "sip:Jane@10.10.90.51" pua/pres_uri … [View More]

1 0

[OpenSER-Users] SerMyAdmin - Cannot log in as admin
by Wyndham Hudson 14 May '08

14 May '08

Hi, I've set up serMyAdmin on the tomcat server and everything appears to be working, however I don't seem to be able to log in as the admin. I've added a user admin to subscriber with password etc. but it still does not allow me in. MySQL is recieveing the queries and processing them as I have checked in the general-query-log. I'm currently running openser 1.2.x with serMyAdmin 0.5. Any help would be appreciated. Thanks

1 0

[OpenSER-Users] remove message body
by Andreas Granig 14 May '08

14 May '08

Hi, Is there any possibility to remove the whole message body of a SIP message? replace_body_all and subst_body seem to operate per line, leaving a bunch of "\n" behind. There's a two year old feature request for that on the tracker (https://sourceforge.net/tracker/?func=detail&atid=743023&aid=1546501&group_…). Any news on that? Any other possibilities? Andreas

1 1

[OpenSER-Users] Segmentation Fault in Openser 1.3.1 - 64 bits.
by Sergio Gutierrez 14 May '08

14 May '08

Hello everybody. Today we got a crash in our production deployment of OpenSER, which is running version 1.3.1 on Solaris SPARC. OpenSER was compiled on 64 bits mode.file is: The backtrace of the core file is: Program terminated with signal 11, Segmentation fault. #0 0xffffffff79719774 in insert_dlg_timer_unsafe (tl=0xffffffff61ea8ad0) at dlg_timer.c:91 91 if ( ptr->timeout <= tl->timeout ) (gdb) bt #0 0xffffffff79719774 in insert_dlg_timer_unsafe (tl=… [View More]0xffffffff61ea8ad0) at dlg_timer.c:91 #1 0xffffffff79719a8c in update_dlg_timer (tl=0xffffffff61ea8ad0, timeout=300) at dlg_timer.c:163 #2 0xffffffff7970fe9c in dlg_onroute (req=0x100341fb0, route_params=0xffffffff7fffe2b0, param=0x0) at dlg_handlers.c:612 #3 0xffffffff7d80c278 in run_rr_callbacks (req=0x100341fb0, rr_params=0xffffffff7d910468) at rr_cb.c:83 #4 0xffffffff7d807b0c in after_loose (_m=0x100341fb0, preloaded=0) at loose.c:865 #5 0xffffffff7d803744 in loose_route (_m=0x100341fb0, _s1=0x0, _s2=0x0) at loose.c:901 #6 0x000000010000f088 in do_action (a=0x1002e3e30, msg=0x100341fb0) at action.c:816 #7 0x0000000100009e48 in run_action_list (a=0x1002e3e30, msg=0x100341fb0) at action.c:132 #8 0x0000000100086a08 in eval_elem (e=0x1002e3ed0, msg=0x100341fb0, val=0x0) at route.c:1069 #9 0x000000010008db44 in eval_expr (e=0x1002e3ed0, msg=0x100341fb0, val=0x0) at route.c:1360 #10 0x000000010008dd00 in eval_expr (e=0x1002e3f18, msg=0x100341fb0, val=0x0) at route.c:1381 #11 0x000000010000e0b8 in do_action (a=0x1002e53c8, msg=0x100341fb0) at action.c:672 #12 0x0000000100009e48 in run_action_list (a=0x1002d8878, msg=0x100341fb0) at action.c:132 #13 0x000000010000a4b0 in run_actions (a=0x1002d8878, msg=0x100341fb0) at action.c:112 #14 0x000000010000a6fc in run_top_route (a=0x1002d8878, msg=0x100341fb0) at action.c:172 #15 0x00000001000781ec in receive_msg ( buf=0x1002aaf68 "INVITE sip:76907295@200.114.42.182<sip%3A76907295(a)200.114.42.182>;user=phone SIP/2.0\r\nVia: SIP/2.0/UDP 200.30.79.17:5066;branch=z9hG4bKa8fae90df\r\nRoute: <sip:200.13.225.243;lr;ftag=885a2b1ed6b8a7d8;did=7cf.1721>\r\nCall-ID: f6a12831f"..., len=747, rcv_info=0xffffffff7ffff860) at receive.c:156 #16 0x00000001000db620 in udp_rcv_loop () at udp_server.c:438 #17 0x00000001000321b8 in main_loop () at main.c:834 #18 0x00000001000373bc in main (argc=7, argv=0xffffffff7ffffbe8) at main.c:1373 I would thank any hint you could provide about it. Best regards. Sergio Gutiérrez. [View Less]

2 3

[OpenSER-Users] sermyadmin almost works
by Lucas Catranis 14 May '08

14 May '08

Anyone Get this setup correctly? I've been at it for a while and after getting it to insert new users I cannot login as an admin. I'm not sure where the problem is but Any help would be appreciated. -- View this message in context: http://www.nabble.com/sermyadmin-almost-works-tp17219053p17219053.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

2 1

[OpenSER-Users] Where exactly are " sip-clients" and "rtp-clients" supposed to be?
by luzango mfupe 14 May '08

14 May '08

Hi mates, In my O'SER 1.3 config file from svn i have this modules parameters which shows the location of rtp and sip clients but in reality these files doesnt exist in the said location or anywhere in my box, what must be wrong with my config?? below are the two lines: modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-clients") -- Luzango Mfupe TUUNE MOBILE Tel:0128440528/0123825710 Tshwane-RSA website:http://www.tuune.mobi

1 0

[OpenSER-Users] cdrtool error: "cannot figure out the destination id ..."
by Sajith T S 14 May '08

14 May '08

Hi! Trying cdrtool prepaid rating, got stuck with something. When a request like "MaxSessionTime From=sip:me@example.com To=sip:0031650222@example.com Duration=7200 Lock=0" is given, cdrtool always return "0", no matter what amount of balance is available in prepaid table. This is what I see in syslog: "CDRTool rating[5759]: Error: cannot figure out the destination id for sip:0031650222@example.com" Cdrtool version is 6.3.2. Apparently rating engine needs the variable $CDR->… [View More]

1 0

[OpenSER-Users] Authentication challenge failure
by Bogdan-Andrei Iancu 14 May '08

14 May '08

Hi, I just found and fix a really strange bug in authentication module, when building the auth challenge header. I say strange, because I found it while using a UAC that implements a very strict view on the auth process. Also this UAC tries to reuse the nonces. This bug had as effect the UACs stopping to re-register with openser after an openser restart. Quite unpleasant effect to have all the UACs dropping out if you do a server restart :( . More technically, the bug consists in openser's … [View More]

1 0

← Newer
1
...
12
13
14
15
16
17
18
...
21
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2008