sr-users February 2008

sr-users@lists.kamailio.org

146 participants
260 discussions

Re: [OpenSER-Users] CDRTool rating on test system (without PSTN)
by Andy Smith 05 Feb '08

05 Feb '08

:P This was simple to fix, turns out my admin account in CDRTool didnt have full admin privileges as far as CDRTool was concerned. Not sure if Id accidentically messed it up or if the default is like that... Well anyway, in case anyone else is as dumb as me in future :D now the answer is on the list, cheers Andy. >However via the web interface in the CDR Section for the cost it is >displayed as "x.xxx" and no data is displayed in the detail section "Rating >Information" either... Any ideas what the issue is?

1 0

[OpenSER-Users] Accurate CDR with RTPProxy
by VoIP Forums www.Go4Calls.com 05 Feb '08

05 Feb '08

Hi all, Is it possible to get accurate CDR of openser using RTPProxy? If ATA did not send BYE message to openser can RTPProxy disconnect the call using some rtptimeout then ACCT module log the correct duration in MySQL database? Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 2

[Serusers] ser 2.1.0-dev16-tcp avpops module compilation error
by Tomasz Zieleniewski 05 Feb '08

05 Feb '08

Hi, I was trying to compile sources from trunk and I encoutered following error: make[1]: Entering directory `/home/sip/src/ser-trunk/modules/avpops' gcc -fPIC -DPIC -m64 -g -O9 -funroll-loops -Wcast-align -minline-all-stringops -falign-loops -ftree-vectorize -mtune=opteron -Wall -DNAME='"ser"' -DVERSION='"2.1.0-dev16-tcp"' -DARCH='"x86_64"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.2.3"' -D__CPU_x86_64 -D__OS_linux -DSER_VER=2001000 -DCFG_DIR='"/home/sip/ser/trunk/test/etc/ser/"' -DMODS_DIR='"/home/sip/ser/trunk/test/lib/ser/modules/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DUSE_NAPTR -DUSE_TLS -DTLS_HOOKS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT -c avpops.c -o avpops.o In file included from avpops_impl.h:41, from avpops_parse.h:38, from avpops.c:50: avpops_db.h:66: error: expected ')' before '*' token make[1]: *** [avpops.o] Error 1 make[1]: Leaving directory `/home/sip/src/ser-trunk/modules/avpops' make: *** [modules] Error 1 Best regards tomasz

1 0

[OpenSER-Users] Missing information in Migration Guide from 1.2.2 to 1.3.0.
by Sergio Gutierrez 05 Feb '08

05 Feb '08

Hello everybody. Trying to migrate from 1.2.2 version to 1.3.0 version, I discovered there is a lost item in migration guide; The structure of gw table changes, because in 1.3.0 version, it has an additional column, so this table must be rebuilt. Best regards. Sergio Gutiérrez

4 8

[OpenSER-Users] Viewing OpenSER debug output
by Brian Heath 04 Feb '08

04 Feb '08

Hi all, Is there a way that you can 're-connect' to an openser debug output process, so you don't have to restart openser every time you want to view the debug data? I've currently got it set accordingly: ################# # openser.cfg # ################ debug=9 fork=yes log_stderror=yes log_facility=LOG_LOCAL1 Alternately, if there's a way I can pipe it all into a text file, and then use tail -f that would be optimal. But I don't mind it as it all flies down my screen - it's at least all in my buffer. Thanks in advance for your help, Brian

2 3

Re: [OpenSER-Users] MSILO back notify not working
by Iñaki Baz Castillo 04 Feb '08

04 Feb '08

On Monday 04 February 2008 18:27:28 Dan-Cristian Bogos wrote: > Hi Iñaki, > > in order to send message confirmation, you need to instruct openser to do > so, it will not do automatically this for you. > > In the documentation you have some sample config how to do it ( > http://www.openser.org/docs/modules/1.3.x/msilo.html#AEN390): > > # MSILO - storing as offline message > if (m_store("$ru")) > { > log("MSILO: offline message stored\n"); > if (!t_reply("202", "Accepted")) > { > sl_reply_error(); > }; > }else{ > log("MSILO: offline message NOT stored\n"); > if (!t_reply("503", "Service Unavailable")) > { > sl_reply_error(); > }; > }; > break; > }; Hi Dan, I've read the fully MSILO module documentation, and my openser script implements the code above. But it does not send any notification MESSAGE to the sender. In fact I don't see in the code you paste where the notification MESSAGE is generated by OpenSer. As I said, message storage works ok for me, as well the message retrieving when destination user registers, but there is not notification MESSAGE (and I've set all the required parameters). Any suggestion? Thanks a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 0

[OpenSER-Users] XMPP GW Error "invalid content-type 0x100ff"
by Ali Jawad 04 Feb '08

04 Feb '08

Hi All I have the following setup X-Lite Client -> Openser With XMPP GW Module <-> ejabberD on the same server <- exodus XMPP client I have enabled presence on the Openser server this allowed me to chat using the Openser server. The next step was to use the XMPP GW module to enable XMPP features using an ejabberd server. I changed the configuration as shown below and logged in using test2 on the exodus XMPP client. I added test2 to the x-lite client and chose send instant message, the x-lite client immediately returned "Error: Your contact is not online." The Openser logs return the following: Feb 4 17:05:52 [11929] DBG:xmpp:cmd_send_message: cmd_send_message Feb 4 17:05:52 [11929] DBG:core:parse_headers: flags=ffffffffffffffff Feb 4 17:05:52 [11929] ERROR:xmpp:cmd_send_message: invalid content-type 0x100ff My Config is below: http://pastebin.com/m7707753a

3 9

Re: [OpenSER-Users] Mediaproxy error no attribute 'autocommit' RESOLVED
by Andy Smith 04 Feb '08

04 Feb '08

Ok, simple fix... Updated to MySQL_python-1.2.2 and all ok now! :D ----- Original Message ----- From: Andy Smith To: users(a)lists.openser.org Sent: Monday, February 04, 2008 4:01 PM Subject: Mediaproxy error no attribute 'autocommit' Hi there, Im trying to run a Mediaproxy and Im recieving this error, Feb 4 14:53:14 server proxydispatcher[22800]: 'Connection' object has no attribute 'autocommit' I´ve had a google for this and its seems like it may be a bug python-sqlite or sqlite bug , but also I tried searching for it on the python issue traker and didnt find anything. Is anyone else aware of this issue and any solution? Im running: Python 2.3.4 MySQL-python.i386 1.0.0-1.RHEL4.1 python-sqlite.i386 1.1.7-1.2.1 sqlite.i386 3.3.6-2 mysql server 5.1.22-rc thanks for any help! Andy.

1 0

[OpenSER-Users] Problem with OpenSER when MySQL database fails
by Arturo Díaz Almagro 04 Feb '08

04 Feb '08

Hello all, Hope anybody could help me. We have a SIP telephony system based on OpenSER with a redundant MySQL database ring. When the "master" database dies, a monit process detect it and modify properly the database entry in the DNS zone file. Two tests can be perform to check the availability of the system when MySQL crashes: - kill mysql process in the database host machine. In this case OpenSER asks the DNS inmediately for the database IP address and the service keeps going as expected. No problem here. - shutdown the interface of the machine where mysql is hosted. In this case OpenSER does not ask the DNS for the new address. It keeps trying over and over the connection with the master and until the interface is not turn on the system keeps hung. So, if the mysql's host interface is shutdown the system hangs but if the mysql process dies the system works properly. In the first case both machines (OpenSER and MySQL) has IP visibility, not in the second, so the problem should be related to that. Has anybody experienced this behaviour? Does anybody know how to solve it? Thanks a lot. -- Arturo Díaz Contact me on FWD: 870436 Skype: arturo.diaz.almagro

1 0

[OpenSER-Users] MSILO back notify not working
by Iñaki Baz Castillo 04 Feb '08

04 Feb '08

Hi, I've configured MSILO module. It works well except the fact that I don't get any notification back to the sender about the storage of the message sent by him. This is: when user_A sends a MESSAGE to user_B and this is stored by MSILO module I don't see any MESSAGE from OpenSer to user_A notifing it. I have set: ------------------------------ # -- msilo -- modparam("msilo", "registrar", "sip:user-offline@mydomain.org") modparam("msilo", "reminder", "sip:reminder@mydomain.org") modparam("msilo", "expire_time", 86400) modparam("msilo", "check_time", 30) modparam("msilo", "send_time", 60) modparam("msilo", "clean_period", 5) modparam("msilo", "use_contact", 1) modparam("msilo", "add_date", 1) modparam("msilo", "max_messages", 20) ------------------------------ As I read in the doc: ------------------------------ 1.3.3. registrar (string) The SIP address used to inform users that destination of their message is not online and the message will be delivered next time when that user goes online. If the parameter is not set, the module will not send any notification. ------------------------------ But I've set that parameter, but when a message is stored I don't see any MESSAGE originated by OpenSer to notify the sender. Shoul I see a MESSAGE from OpenSer? I don't understant too what "reminder" parameter means: ------------------------------ 1.3.4. reminder (string) The SIP address used to send reminder messages. If this value is not set, the reminder feature is disabled. ------------------------------ Any explanation please? Thanks a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2008