sr-users September 2007

sr-users@lists.kamailio.org

158 participants
247 discussions

[OpenSER-Users] DNS blacklisting problem

by Tim Madorma

Hi, I'm interested in using DNS blacklisting to stop transmitting SIP requests towards UAS endpoints that are non-responsive. I am on version 1.2, but I can't get it to work properly. Here is what I am trying to do: 1) I get a message from a UAC that needs to be sent towards 1 of 4 destination UAS endpoints. 2) I setup the OpenSER to perform an SRV lookup which returns a record that has four A records associated with it. It looks as follows: ;; QUESTION SECTION: ;_sip._udp.aimcidfilter.com. IN SRV ;; ANSWER SECTION: _sip._udp.aimcidfilter.com. 60 IN SRV 1 100 5061 spinner.eng.rr.com. _sip._udp.aimcidfilter.com. 60 IN SRV 2 100 5061 bart.eng.rr.com. _sip._udp.aimcidfilter.com. 60 IN SRV 3 50 5061 homer.eng.rr.com. _sip._udp.aimcidfilter.com. 60 IN SRV 3 50 5061 crunch.eng.rr.com. 3) The OpenSER does a gethostbyname which performs a DNS A record lookup and gets a response for spinner.eng.rr.com. 4) When the OpenSER sends towards spinner.eng.rr.com, it does not get a SIP response from it. *It is at this point I was hoping that OpenSER would blacklist this UAS endpoint*, but for each incoming request that is received by the OpenSER, it continues to resolve the domain in the same manner and sends towards spinner.eng.rr.com even though there is no SIP response. Is what I am trying to do in accordance with how OpenSER blacklisting is supposed to work? I am trying to have OpenSER send towards bart.eng.rr.com when spinner.eng.rr.com is not responding or is not reachable. My configuration is as below. Note that I have even tried to disable sending towards spinner.eng.rr.com by manually adding a dst_blacklist entry - that doesn't even seem to work for me.. Am I doing something wrong? I have also attached a log file. Here is my output from openserctl # openserctl fifo list_blacklists 200 OK List:: net_filter owner=13 flags=1 Rule:: flags=0 IP:: 65.185.233.55 Mask:: 255.255.255.255 Proto:: 0 Port:: 5061 List:: dns owner=17 flags=6 --------------- # # Openser.cfg # ----------- global configuration parameters ------------------------ debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) maxbuffer=1048576 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #reply_to_via=1 children=4 log_facility=LOG_LOCAL4 dns_use_search_list=no dns_servers_no=2 user="sipproxy" group="sipproxy" disable_dns_blacklist=no disable_dns_failover=no dns_try_ipv6=no dns_retr_time=2 dns_retr_no=2 dst_blacklist = net_filter:{ ( any , 65.185.233.55, 5061 , "" )} # block towards spinner listen=udp:65.185.232.62:5060 alias=65.185.233.104:5060 # LOAD OpenSER MODULES mpath="/sw/lib/openser/modules/" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "acc.so" loadmodule "mi_fifo.so" loadmodule "xlog.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- modparam("acc", "log_level", 2) modparam("acc", "log_flag", 1) modparam("acc","report_cancels", 1) modparam("acc","failed_transaction_flag", 1) modparam("acc","log_extra", "req_uri=$rU") modparam("tm", "fr_timer", 5) modparam("tm","fr_inv_timer",5) modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages within a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { route(1); }; if (method=="OPTIONS") { sl_send_reply("200", "OK"); exit; } if (uri =~ "^sip:feature_fs@" || method=="NOTIFY") { xlog("L_DBG", "TWC: received incoming message:\n <$mb>\n"); seturi("sip:feature_fs@aimcidfilter.com"); setflag(1); route(1); } else { sl_send_reply("404", "Not Found"); }; } ##################################################### # Default Message Handler ##################################################### route[1] { # Send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

16 years, 6 months

[Users] AVP management

by Ovidiu Sas

Hi all, There are modules that are using default values for AVPs. What will happen if another module is reusing the same AVP? Or if the AVP is redefined inside the script? Is this completely orthogonal? Should I worry about this while using AVPs? Regards, Ovidiu Sas

16 years, 6 months

[OpenSER-Users] Load Balance with 2 OpenSER

by ram

Hi For high availabilty iam doing with loadbalance with Round Robin could some one suggest what is the best method to do I have a domain xyz.com not static IP use will authenticate I have 2 openser Servers, with 1 Mysql, both teh server need to talk to one Mysql and user should be able to connect any server, depends on availability could some suggest me how can i do this. to have less downtime. or failover ram

16 years, 6 months

[OpenSER-Users] serialize_branches seems to be not working

by Marcello Lupo

Hi to all, i'm using openser 1.2.2 no tls and i use exec_dset to get list of gateways in destination set to be serialized. After execution of exec_dset i get in output: sip:123456@10.10.10.1:5062;q=0.2 sip:123456@10.10.10.10:5060;q=0.1 $ds become : Contact: sip:123456@10.10.10.1:5062;q=0.2, sip:123456@10.10.10.10:5060;q=0.1 RURI become: sip:123456@10.10.10.1:5062;q=0.2 $bR become: sip:123456@10.10.10.10:5060;q=0.1 All seems to be fine but when i run serialize_branches() i get: DEBUG:serialize_branches: nothing to do - all same q! Any ideas on what i'm missing? May be something in the output of exec_dset?? I'm using the \n between lines in my custom LCR scripts to get gateways from DB. Thanks, Bye, Marcello

16 years, 6 months

Fw: [OpenSER-Users] Prepaid SIP

by Fredrik Lundmark

I forgot to cc the list /Fredrik ----- Original Message ----- From: Fredrik Lundmark To: srinivas Antarvedi Sent: Sunday, September 30, 2007 11:34 AM Subject: Re: [OpenSER-Users] Prepaid SIP I believe SEMS (http://ftp.iptel.org/pub/sems/doc/current/AppDocExample.html) together with CDRTool (http://cdrtool.ag-projects.com/) can be adjusted to your needs - any feedback from anyone out there that's done it? BR/// Fredrik ----- Original Message ----- From: srinivas Antarvedi To: users(a)openser.org Sent: Friday, September 28, 2007 12:27 PM Subject: [OpenSER-Users] Prepaid SIP Hello all, Actually i have a testing setup which facilitates to give accounting details to mysql db once call was end by any one of the uac. But if i want to have a prepaid solution like our mobiles i dont found any solution till now on open source some of my friend suggested to go for B2BUA from vovida.org does anybody using this ? is this real that this can work for prepaid stuff? if not just let me know otherwise i will waste my time in doing some research on something not useful if not what might be the other ways to get around the problem of prepaid billing i know we can do this using b2bua, can we go ahead with asterisk? waiting for valuable suggestions -- Srinivas Antarvedi -------------------------------------------------------------------------------- _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

16 years, 6 months

[OpenSER-Users] Problem in REGISTER with "Route" (I don't want to use "alias" in conf file)

by Iñaki Baz Castillo

Hi, I've multidomain OpenSer and I want the possibility of adding new domains without having to write in conf file and restart OpenSer, so I use "domain" module and functions. It works fine. The problem is that WengoPhone includes a "Route" in the REGISTER so it is matches in "loose_route" and creates an infinite loop: ------------------------------------------- U 2007/09/12 11:00:47.770226 212.121.235.18:1029 -> 88.95.0.210:5060 REGISTER sip:sip.domain.net SIP/2.0 Via: SIP/2.0/UDP 192.168.1.58:5061;rport;branch=123456789 Route: <sip:sip.domain.net;lr> U 2007/09/12 11:00:47.772884 88.95.0.210:5060 -> 88.95.0.210:5060 REGISTER sip:sip.domain.net SIP/2.0 Max-Forwards: 10 Via: SIP/2.0/UDP 88.95.0.210;branch=z9hG4bK734e.08122386.0 Via: SIP/2.0/UDP 192.168.1.58:5061;received=212.121.235.18;rport=1029;branch=123456789 Route: <sip:sip.domain.net;lr> U 2007/09/12 11:00:47.775153 88.95.0.210:5060 -> 88.95.0.210:5060 REGISTER sip:sip.domain.net SIP/2.0 Max-Forwards: 9 Via: SIP/2.0/UDP 88.95.0.210;branch=z9hG4bK734e.18122386.0 Via: SIP/2.0/UDP 88.95.0.210;rport=5060;branch=z9hG4bK734e.08122386.0 Via: SIP/2.0/UDP 192.168.1.58:5061;received=212.121.235.18;rport=1029;branch=123456789 Route: <sip:sip.domain.net;lr> etc etc... ------------------------------------------- A developer of WengoPhone said me that this "Route" header is not necessary but still valid, and that I can solve it by adding: alias=sip.domain.org But I don't want to write in conf file for each new added domain, and I don't want to restart OpenSer when it. I'm thinking in change: if (loose_route()) { by if (loose_route() && method!="REGISTER") { but it doesn't seem very ellegatn solution. How could I solve it? Thanks for any help. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

16 years, 6 months

[OpenSER-Users] openser xmpp module: cannot register jabber client

by Anjum Syed

Openser xmpp module is up and running.. I have configured it in "server" mode so that there is no need for a separate jabber server. I am trying to register "sip-communicator" client using jabber protocol to openser server... But the registration fails with message " Connection refused" 502 XMPP error. Please can any one provide any suggestions/ help ??? Thanks Anjum -- View this message in context: http://www.nabble.com/openser-xmpp-module%3A-cannot-register-jabber-client-… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

16 years, 6 months

[OpenSER-Users] openser + wesip error

by luhan

HI: i setup openser1.2.0 with wesip at one PC,my OS is AS4,and get the " 500 Server Internal Error!" response when "INVITE"; this is my debug log: --------------------------------------------- SIP Request: 0(4768) method: <INVITE> 0(4768) uri: <sip:8001@192.168.7.13> 0(4768) version: <SIP/2.0> 0(4768) parse_headers: flags=2 0(4768) end of header reached, state=5 0(4768) parse_headers: Via found, flags=2 0(4768) parse_headers: this is the first via 0(4768) After parse_msg... 0(4768) preparing to run routing scripts... 0(4768) parse_headers: flags=100 0(4768) DEBUG:maxfwd:is_maxfwd_present: value = 70 0(4768) parse_headers: flags=10 0(4768) DEBUG: add_param: tag=ea4356ed66934d1fb09cb00d2a9bbf13 0(4768) DEBUG: add_param: epid=74d96acc9e 0(4768) DEBUG:parse_to:end of header reached, state=29 0(4768) DBUG:parse_to: display={"luhan"}, ruri={sip:8000@192.168.7.13} 0(4768) parse_headers: flags=200 0(4768) DEBUG:parse_to:end of header reached, state=10 0(4768) DBUG:parse_to: display={}, ruri={sip:8001@192.168.7.13} 0(4768) DEBUG: get_hdr_field: <To> [25]; uri=[sip:8001@192.168.7.13] 0(4768) DEBUG: to body [<sip:8001@192.168.7.13> ] 0(4768) get_hdr_field: cseq <CSeq>: <1> <INVITE> 0(4768) DEBUG: get_hdr_body : content_length=523 0(4768) found end of header 0(4768) find_first_route: No Route headers found 0(4768) loose_route: There is no Route HF 0(4768) grep_sock_info - checking if host==us: 12==12 && [192.168.7.13] == [192.168.7.13] 0(4768) grep_sock_info - checking if port 5060 matches port 5060 0(4768) lookup(): '8001' Not found in usrloc 0(4768) grep_sock_info - checking if host==us: 12==12 && [192.168.7.13] == [192.168.7.13] 0(4768) grep_sock_info - checking if port 5060 matches port 5060 0(4768) rewrite_uri: Rewriting Request-URI with 'sip:8001@192.168.7.14:5061' 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) DEBUG: t_newtran: T on entrance=0xffffffff 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) parse_headers: flags=78 0(4768) t_lookup_request: start searching: hash=17460, isACK=0 0(4768) DEBUG: proceeding to pre-RFC3261 transaction matching 0(4768) DEBUG: t_lookup_request: no transaction found 0(4768) new INVITE 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) check_via_address(192.168.7.14, 192.168.7.14, 0) 0(4768) WARNING:vqm_resize: resize(0) called 0(4768) DEBUG:tm:_reply_light: reply sent out. buf=0x81544d0: SIP/2.0 1..., shmem=0xb617a3a8: SIP/2.0 1 0(4768) DEBUG:tm:_reply_light: finished 0(4768) no processor found for packet with dst port:5060 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) check_via_address(192.168.7.14, 192.168.7.14, 0) 0(4768) DEBUG: cleanup_uac_timers: RETR/FR timers reset 0(4768) DEBUG:tm:set_timer: relative timeout is 500000 0(4768) DEBUG: add_to_tail_of_timer[4]: 0xb6178880 (64500000) 0(4768) DEBUG:tm:set_timer: relative timeout is 30 0(4768) DEBUG: add_to_tail_of_timer[0]: 0xb617889c (94) 0(4768) DEBUG:tm:_reply_light: reply sent out. buf=0x8154630: SIP/2.0 5..., shmem=0xb617a3a8: SIP/2.0 5 0(4768) DEBUG:tm:_reply_light: finished 0(4768) DEBUG:tm:UNREF_UNSAFE: after is 0 0(4768) DEBUG:destroy_avp_list: destroying list (nil) 0(4768) receive_msg: cleaning up 0(4768) SIP Request: 0(4768) method: <ACK> 0(4768) uri: <sip:8001@192.168.7.13> 0(4768) version: <SIP/2.0> 0(4768) parse_headers: flags=2 0(4768) end of header reached, state=5 0(4768) parse_headers: Via found, flags=2 0(4768) parse_headers: this is the first via 0(4768) After parse_msg... 0(4768) preparing to run routing scripts... 0(4768) DEBUG : sl_filter_ACK: to late to be a local ACK! 0(4768) parse_headers: flags=100 0(4768) DEBUG:maxfwd:is_maxfwd_present: value = 70 0(4768) parse_headers: flags=10 0(4768) DEBUG: add_param: tag=ea4356ed66934d1fb09cb00d2a9bbf13 0(4768) DEBUG: add_param: epid=74d96acc9e 0(4768) DEBUG:parse_to:end of header reached, state=29 0(4768) DBUG:parse_to: display={"luhan"}, ruri={sip:8000@192.168.7.13} 0(4768) parse_headers: flags=200 0(4768) DEBUG: add_param: tag=247ebaf4bad05d36e355dada7f3546d3-00ac 0(4768) DEBUG:parse_to:end of header reached, state=29 0(4768) DBUG:parse_to: display={}, ruri={sip:8001@192.168.7.13} 0(4768) DEBUG: get_hdr_field: <To> [67]; uri=[sip:8001@192.168.7.13] 0(4768) DEBUG: to body [<sip:8001@192.168.7.13>] 0(4768) get_hdr_field: cseq <CSeq>: <1> <ACK> 0(4768) DEBUG: get_hdr_body : content_length=0 0(4768) found end of header 0(4768) find_first_route: No Route headers found 0(4768) loose_route: There is no Route HF 0(4768) grep_sock_info - checking if host==us: 12==12 && [192.168.7.13] == [192.168.7.13] 0(4768) grep_sock_info - checking if port 5060 matches port 5060 0(4768) lookup(): '8001' Not found in usrloc 0(4768) grep_sock_info - checking if host==us: 12==12 && [192.168.7.13] == [192.168.7.13] 0(4768) grep_sock_info - checking if port 5060 matches port 5060 0(4768) rewrite_uri: Rewriting Request-URI with 'sip:8001@192.168.7.14:5061' 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) DEBUG: t_newtran: T on entrance=0xffffffff 0(4768) parse_headers: flags=ffffffffffffffff 0(4768) parse_headers: flags=78 0(4768) t_lookup_request: start searching: hash=17460, isACK=1 0(4768) DEBUG: proceeding to pre-RFC3261 transaction matching 0(4768) DEBUG: non-2xx ACK matched 0(4768) DEBUG:tm:REF_UNSAFE: after is 1 0(4768) DEBUG: t_lookup_request: transaction found (T=0xb61787b8) 0(4768) DEBUG: cleanup_uac_timers: RETR/FR timers reset 0(4768) DEBUG: add_to_tail_of_timer[2]: 0xb6178800 (69) 0(4768) no processor found for packet with dst port:5060 0(4768) WARNING: t_reply: ACKs are not replied 0(4768) DEBUG:tm:UNREF_UNSAFE: after is 0 0(4768) DEBUG:destroy_avp_list: destroying list (nil) 0(4768) receive_msg: cleaning up 1(4769) DEBUG: timer routine:4,tl=0xb6178880 next=(nil), timeout=64500000 1(4769) DEBUG: timer routine:2,tl=0xb6178800 next=(nil), timeout=69 1(4769) DEBUG: wait_handler : removing 0xb61787b8 from table 1(4769) DEBUG: delete transaction 0xb61787b8 1(4769) DEBUG: wait_handler : done -------------------------------------------------------------------------- there is my openser.cfg ____________________________ debug=9 fork=no log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=192.168.7.13 listen=localhost listen=127.0.0.1 mpath="/usr/local/lib/openser/modules/" loadmodule "mi_fifo.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "seas.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("seas", "listen_sockets", "127.0.0.1:5080") route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if(!as_relay_t("app_server_one")){ t_reply("500","Application Server error"); } } ------------------------------------------------ there is my wesip configure: ____________________________________ <Server port="5005" shutdown="SHUTDOWN" debug="0"> <Service name="Tomcat-Standalone"> <Connector className="org.apache.catalina.connector.http.HttpConnector" port="7080" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" /> <Connector className="com.voztele.sipservlet.connector.SipConnector" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="10" addresses="localhost:5060" pathName="com.voztele" > <ExtraProperties> <Property key="com.voztele.javax.sip.SER_ADDRESS" value="127.0.0.1:5080" /> <Property key="javax.sip.STACK_NAME" value="app_server_one" /> <Property key="com.voztele.javax.sip.THREAD_POOL_SIZE" value="10" /> <Property key="com.voztele.javax.sip.REENTRANT_LISTENER" value="true" /> <Property key="com.voztele.javax.sip.SPIRAL_HDR" value="true" /> </ExtraProperties> </Connector> <Engine name="Standalone" defaultHost="localhost" debug="10" className="com.voztele.sipservlet.core.ConvergedEngine"> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.0"/> <Mapper className="com.voztele.sipservlet.core.EngineSipMapper" protocol="SIP/2.0"/> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Realm className="org.apache.catalina.realm.MemoryRealm" /> <Host name="localhost" nameSip="localhost_5060" debug="0" appBase="wesipapps" unpackWARs="true" port="5060" autoDeploy="true" className="com.voztele.sipservlet.core.ConvergedHost"> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Mapper className="com.voztele.sipservlet.core.SipHostMapper" protocol="SIP/2.0"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.1"/>  </Host> </Engine> </Service> </Server> ----- please help me,thank you!

16 years, 6 months

[Serusers] acc.so wont build

by David Adade

ive searched for the radius module ldconfig -v | grep radius and found /usr/lib64: libradiusclient-ng.so.2 -> libradiusclient-ng.so.2.0.0 /usr/lib libradius-1.0.1.so -> libradius.so tried to build in root ser dir Still not sure what i am missing same error below make[1]: Entering directory `/usr/src/ser/ser-0.9.6/modules/acc' gcc -shared -Wl,-O2 -Wl,-E acc.o acc_mod.o diam_avp.o diam_message.o diam_tcp.o -L/usr/local/lib -lradiusclient-ng -o acc.so /usr/bin/ld: cannot find -lradiusclient-ng collect2: ld returned 1 exit status make[1]: *** [acc.so] Error 1 make[1]: Leaving directory `/usr/src/ser/ser-0.9.6/modules/acc' ************************************************************************** First off, make sure /etc/ld.so.conf points to the correct radius client dir, rerun ldconfig. Then do what it says. Don't make the module FROM the module directory. There's info in the INSTALL file on how to compile the modules one at a time properly. From the root src tree: make modules=modules/acc modules David Adade wrote: > > > first problem running make in /usr/src/ser/ser-0.9.6/modules/acc > > i get the following error > acc.c:56:33: radiusclient-ng.h: No such file or directory > > So i installed the following > > freeradius-1.0.1-3.RHEL4.5. > radiusclient-ng-devel-0.5.2-4 > radiusclient-ng-0.5.2-4 > > now i get the error > > ../../Makefile.modules:21: "you should run make from the main ser > directory" > gcc -shared -Wl,-O2 -Wl,-E acc.o acc_mod.o diam_avp.o > diam_message.o diam_tcp.o -L/usr/local/lib -lradiusclient-ng -o acc.so > /usr/bin/ld: cannot find -lradiusclient-ng > collect2: ld returned 1 exit status > make: *** [acc.so] Error 1 > > vi /etc/ld.so.conf reads > > /usr/ofed/lib > /usr/lib64/ > /etc/radiusclient > /usr/sbin > /usr/bin > > I am running centos 4. The radius server works fine no problems > > > vi /usr/src/ser/ser-0.9.6/modules/acc/Makefile reads > > # uncomment the next line if you wish to enable SQL accounting > DEFS+=-DSQL_ACC > > # uncomment the next two lines if you wish to enable RADIUS accounting > DEFS+=-DRAD_ACC > include ../../Makefile.radius > # DEFS+=-DRAD_ACC -I$(LOCALBASE)/include > # LIBS=-L$(LOCALBASE)/lib -lradiusclient- > > Can anyone help > > > > > > > > > *********************************************************************** > IMPORTANT NOTICE: > The information transmitted is intended only for the person or entity to > which it is addressed and may contain confidential and/or privileged > material. If you receive this in error, please contact the sender and > delete the material from any computer. > This e-mail is intended for the above named addressee only. > Should you receive this e-mail in error please contact > Customer Services on Tel: + 44 (0)870 241 2439 > ************************************************************************ > > ------------------------------------------------------------------------ > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > -- Neil Fusillo CEO Infinideas, inc. http://www.ideasip.com *********************************************************************** IMPORTANT NOTICE: The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you receive this in error, please contact the sender and delete the material from any computer. This e-mail is intended for the above named addressee only. Should you receive this e-mail in error please contact Customer Services on Tel: +44 (0)870 241 2439 ************************************************************************

16 years, 6 months

[Serusers] acc.so wont build

by David Adade

first problem running make in /usr/src/ser/ser-0.9.6/modules/acc i get the following error acc.c:56:33: radiusclient-ng.h: No such file or directory So i installed the following freeradius-1.0.1-3.RHEL4.5. radiusclient-ng-devel-0.5.2-4 radiusclient-ng-0.5.2-4 now i get the error ../../Makefile.modules:21: "you should run make from the main ser directory" gcc -shared -Wl,-O2 -Wl,-E acc.o acc_mod.o diam_avp.o diam_message.o diam_tcp.o -L/usr/local/lib -lradiusclient-ng -o acc.so /usr/bin/ld: cannot find -lradiusclient-ng collect2: ld returned 1 exit status make: *** [acc.so] Error 1 vi /etc/ld.so.conf reads /usr/ofed/lib /usr/lib64/ /etc/radiusclient /usr/sbin /usr/bin I am running centos 4. The radius server works fine no problems vi /usr/src/ser/ser-0.9.6/modules/acc/Makefile reads # uncomment the next line if you wish to enable SQL accounting DEFS+=-DSQL_ACC # uncomment the next two lines if you wish to enable RADIUS accounting DEFS+=-DRAD_ACC include ../../Makefile.radius # DEFS+=-DRAD_ACC -I$(LOCALBASE)/include # LIBS=-L$(LOCALBASE)/lib -lradiusclient- Can anyone help *********************************************************************** IMPORTANT NOTICE: The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. If you receive this in error, please contact the sender and delete the material from any computer. This e-mail is intended for the above named addressee only. Should you receive this e-mail in error please contact Customer Services on Tel: +44 (0)870 241 2439 ************************************************************************

16 years, 6 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2007