sr-users August 2007

sr-users@lists.kamailio.org

169 participants
287 discussions

[OpenSER-Users] Check for empy string with avp_check()
by Jens Carl 20 Aug '07

20 Aug '07

Hello List, is it possible to check with avp_check() if a string is empty or not? I have tried to used something like that: avp_check( "$avp(s:test)", "eq//g" ); but this allways generates error when I start openser. $avp(s:test) is filled via a DB select with avp_db_select() and can be a empty string or not. I also tried is_avp_set() with the flag 'e', but this also didn't do the right thing. What does the flag 'e'? How this function determinate if a string is empty or not. Maybe I can change my DB value? Thanks in advance Jens

2 1

[OpenSER-Users] CDR Tools Installation
by ram 20 Aug '07

20 Aug '07

Hi I have downloaded CDRtools cdrtool_5.2.1.tar.gz my OS Fedora Core release 5 (Bordeaux) I have followed the Document INSTALL.txt I dont see this File at all in my cdrtools directory even i did search for the file, i have not found ----------------------------------------------------- Edit /etc/default/cdrtool and set RUN_ratingEngine=yes Then restart the rating engine: /etc/init.d/cdrtool restart ------------------------------------------- iam not able to perform this step at all can some one suggest me what is wrong iam doing.. ram

2 2

[Serusers] ser and mysql
by Piyush.Bansal＠relianceada.com 20 Aug '07

20 Aug '07

hi all, I'm using SER with MySql database. Can anybody tell me the highest version of MySql which can be used with SER?? Plz reply asap.... thanx 'n' regds, The information contained in this e-mail message is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you should return it to the sender immediately. Please note that while we scan all e-mails for viruses we cannot guarantee that any e-mail is virus-free and accept no liability for any damage caused by any virus transmitted by this email.

3 2

[OpenSER-Users] openser 1.2.2 packages
by Daniel-Constantin Mierla 20 Aug '07

20 Aug '07

Hello, thanks to Julien Blache, Jan Ondrej and Peter Nixon, a full set of packages for different distributions are already available. Debian unstable should have them already in the official repository (if your mirror got synchronized since yesterday evening). For many flavors of SuSE, packages are available at: http://download.opensuse.org/repositories/network:/telephony/ For Fedora 7: http://www.openser.org/pub/openser/latest/packages/Fedora/7/ or: http://ftp.upjs.sk/pub/users/sal/Fedora/7/ Cheers, Daniel

4 6

[OpenSER-Users] OpenSER 1.2.2 - Problem with database (postgres?)
by Frey, Daniel (external) 20 Aug '07

20 Aug '07

Hi *, I installed the new version 1.2.2, but now the loading of modules fails when loading the domain module. With 1.2.1 everything worked fine. Some more tests lead me to the conclusion that the problem is likely to be caused by accessing the database, since I commented out the domain module and I could even register a user which does not need to access the database (no authorization required), but when trying to register a user with digest authorization, it dies when accessing the database. Symptons are: On the first database access, the process dies immediately, without further messages in /var/log/messages or elsewhere. Setting debug=9 doesn't help to gather more information. Anyone else who can confirm this problem? Any ideas/solutions? BTW: I'm using postgres, not mysql - just in case it matters... Regards, Daniel T-Mobile Deutschland GmbH Aufsichtsrat: Hamid Akhavan (Vorsitzender) Geschaftsfuhrung: Philipp Humm (Sprecher), Thomas Berlemann, Stefan Homeister, Holger Kranzusch, Gunther Ottendorfer, Dr. Raphael Kubler, Dr. Steffen Roehn Handelsregister: Amtsgericht Bonn, HRB 59 19 Sitz der Gesellschaft: Bonn WEEE-Reg.-Nr.: DE60800328

4 8

[Serusers] Listening on multiple ports
by SIP 20 Aug '07

20 Aug '07

I'm using SER 0.9.6. I know that, with multiple IP addresses on the SER machine, I have to add an option to let SER understand that it's on a box that's multihomed, so that it doesn't send data out a different IP from the one that was originally contacted. Does something similar have to be done if there's one IP but SER is listening on multiple ports? N.

2 1

[Serusers] NOTIFY header construction for mid-dialog presence event package
by samuel 20 Aug '07

20 Aug '07

Hi all!!! I'm experiencing quite difficulties setting up a dedicated (and separated) presence server with NATted end-points and the dstblacklist feature. I'd like to get some info about the construction of the most important headers (Req-URI,Contact,To,From,Via,Routr) for the different NOTIFY modalities depending on the state of the subscription. Setting up async_auth_queries I've seen the pending and the active NOTIFY have different Req-URI and the second one is blocked by the NAT router. Further mid-dialog NOTIFYs providing changes in the presence status has also different headers... My main concern is whether the info for constructing the routing headers is taken from location table, from watcherinfo.dialog table, or from the incoming message...I know I could follow the code but an explanation would provide a really helpfull overview and later checking the code will be much simpler. Thanks in advance, Samuel.

3 14

[OpenSER-Users] OpenSER 1.1.1 load_contacts/next_contacts
by SMP 20 Aug '07

20 Aug '07

I'm trying to implement failover using the load_contacts/next_contacts from the lcr module. The problem I have is the INVITE message is sent simultaneously to both contact's instead of trying the first and then the second. I keep getting 'load_contacts(): DEBUG: Nothing to do - all same q!' when I've set them up with separate q values?? Anyone else have issues with this? Did I set up the data incorrectly or possibly something in the config? Thanks in advance for any help or advice Shannon debug: 0(20640) rewrite_uri: Rewriting Request-URI with ' sip:3125551234@xx.xx.xx.144:5060' 0(20640) xl_get_spec_value: error - null sp->itf 0(20640) Lookup done 0(20640) load_contacts(): DEBUG: Nothing to do - all same q! 0(20640) Contacts loaded <sip:3125551234@xx.xx.xx.144:5060> 0(20640) next_contacts(): DEBUG: No AVPs -- we are done! 0(20640) Next Contacts loaded <sip:3125551234@xx.xx.xx.144:5060> config snip: if(!lookup("location")) { sl_send_reply("404", "Not Found"); xlog("L_ERROR","Unkonwn location sending 404\n"); return; } else { xlog("L_INFO"," Lookup done \n"); } if(!load_contacts()){ sl_send_reply("500", "Server Internal Error - Cannot load translations"); xlog("L_ERROR"," Unable to load contacts <$ru> \n"); exit; } else { xlog("L_INFO"," Contacts loaded <$ru>\n"); } if(next_contacts()) { xlog("L_INFO"," Next Contacts loaded <$ru>\n"); t_on_failure("10"); } else { xlog("L_ERROR"," Unable to load next_contacts <$ru> \n"); exit; } mysql location table: +------------+--------+-------------------------------------+----------+------+---------------------+------+-----------------+------+---------------------+-------+------------+--------+---------+ | username | domain | contact | received | path | expires | q | callid | cseq | last_modified | flags | user_agent | socket | methods | +------------+--------+-------------------------------------+----------+------+---------------------+------+-----------------+------+---------------------+-------+------------+--------+---------+ | 3125551234 | | sip:3125551234@xx.xx.xx.180:5060 | NULL | NULL | 2020-05-28 21:32:15 | 0.40 | Default-Call-ID | 42 | 2007-07-29 11:35:02 | 128 | | NULL | NULL | | 3125551234 | | sip:3125551234@xx.xx.xx.144:5060 | NULL | NULL | 2020-05-28 21:32:15 | 0.30 | Default-Call-ID | 42 | 2007-08-17 09:36:00 | 128 | | NULL | NULL | +------------+--------+-------------------------------------+----------+------+---------------------+------+-----------------+------+---------------------+-------+------------+--------+---------+

3 4

[OpenSER-Users] Not connection from public IP
by Arya 19 Aug '07

19 Aug '07

Hi guys I'm new to OpenSER so I used a article to install and configure it, I was able to connect to it from my lan, but it never works from my public IP. This is the tutorila I used: http://www.oldskoolphreak.com/tfiles/voip/beginners_openser.txt I forwarded port 5060 to the server but its no use. I also tried this on two diffrent ISPs with the same result. Is there anything that I need to change in the configuration to make it accept connections from a public IP? -- Thank You

2 1

[OpenSER-Users] New OpenSER users spanish mailing list
by Jesus Rodriguez 19 Aug '07

19 Aug '07

Hello, A new mailing list dedicated for general purpose discussions in Spanish about OpenSER has been created in openser.org server. The name of the list is users-es(a)openser.org If you are spanish reading/speaking and want to discuss about OpenSER in spanish, please join us at: http://www.openser.org/cgi-bin/mailman/listinfo/users-es Regards Saludos JesusR. ------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr(a)voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------

1 0

← Newer
1
...
10
11
12
13
14
15
16
...
29
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2007