sr-users July 2007

sr-users@lists.kamailio.org

163 participants
261 discussions

[OpenSER-Users] Presence Module no response for SUBSCRIBE request

by KevinKinnan

My Presence module works fine with PUBLISH request, but not with SUBSCRIBE request. The trace shows as follows, the requestURI is the IP address of Presence module, and the request directly sends to presence server, I think there must be something wrong with the structure of SUBSCRIBE request. any one can point what is wrong will be helpful , Thank you!---------------Sending Request---------------PUBLISH sip:148.88.233.209:5065 SIP/2.0Call-ID: ef68e3acb55c2a4c791b1e31f7362b6f(a)148.88.232.101CSeq: 849 PUBLISHFrom: <sip:alice@148.88.232.101:5061>To: <sip:alice@148.88.232.101:5061>Via: SIP/2.0/UDP 148.88.232.101:5061;branch=z9hG4bK19953Max-Forwards: 70Expires: 3600Event: presenceContact: <sip:alice@148.88.232.101:5061>Content-Type: application/cpim-pidf+xmlContent-Length: 220<?xml version="1.0" encoding="UTF-8" standalone="no"?><presence xmlns="urn:ietf:params:xml:ns:pidf" entity="pres:alice@open-ims.test"><tuple id="sip-client(java)"><status><basic>online</basic></status></tuple></presence>---------------Received Response---------------SIP/2.0 200 OKCall-ID: ef68e3acb55c2a4c791b1e31f7362b6f(a)148.88.232.101CSeq: 849 PUBLISHFrom: <sip:alice@148.88.232.101:5061>To: <sip:alice@148.88.232.101:5061>;tag=762c87025812f63000552d0e54932ab8.31c6Via: SIP/2.0/UDP 148.88.232.101:5061;branch=z9hg4bk19953Expires: 3590SIP-ETag: a.1184861600.3810.10Server: OpenSER (1.2.0-notls (i386/linux))Content-Length: 0---------------Sending Request---------------SUBSCRIBE sip:148.88.233.209:5065 SIP/2.0Call-ID: 5c280b2299c2834b7705dece8497ec2f(a)148.88.232.101CSeq: 20 SUBSCRIBEFrom: <sip:alice@148.88.232.101>To: <sip:bob@148.88.232.101>Via: SIP/2.0/UDP 148.88.232.101:5061;branch=z9hG4bK97556Max-Forwards: 70Expires: 3600Event: presenceContact: <sip:alice@148.88.232.101:5061>Content-Length: 0...... _________________________________________________________________ 探索 Windows Vista 的世界 http://search.live.com/results.aspx?q=windows+vista&mkt=zh-cn&FORM=LIVSOP

17 years, 5 months

[OpenSER-Users] Redirect to Trunk IP SIP/PSTN gateway + billing

by Marc LEURENT

Does anyone succeed in redirecting SIP calls like [0-9]*(a)sip.test.com to a SIP/PSTN gateway provider without using asterisk? Thanks

17 years, 5 months

[OpenSER-Users] Bug or bad config?

by Antonio Reale

Hi all, Im trying to set up conditional call forwarding using an openser.cfg created with sip:wizard on sipwise.com. On ring-timeout before response 408 I receive a "500 I'm terribly sorry..." message. ngrep output: ---------------------------------------------------------------------- U proxyip:5060 -> clientip:1025 SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL). Via: SIP/2.0/UDP clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025. From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a. To: <sip:8888@proxyip>;tag=89c3d91cf34558b4440b4dea7bd37a3b.9860. Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56. CSeq: 2 INVITE. Server: OpenSer (1.1.1-notls (i386/linux)). Content-Length: 0. . # U proxyip:5060 -> clientip:1025 SIP/2.0 408 Request Timeout. Via: SIP/2.0/UDP clientip;branch=z9hG4bK0a0a2d5600000054469e38f600007d4800000065;rport=1025. From: "unknown" <sip:9991@proxyip>;tag=6c5264b687a. To: <sip:8888@proxyip>;tag=1da87856efbb12e9687f30fa08f307cb-9860. Call-ID: EDC29EF258D44A69818BF2960CF191360x0a0a2d56. CSeq: 2 INVITE. Server: OpenSer (1.1.1-notls (i386/linux)). Content-Length: 0. ------------------------------------------------------------------------- With tail -f /var/log/message I see (output lines are cutted): ------------------------------------------------------------------------- Jul 18 18:55:22 proxy /usr/sbin/openser[5615]: NAT-Reply - S=180 D=Ringing F=sip.... Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Redirect from UAC intercepted - M=INVITE RURI=sip:.... Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Clear callee preferences - M=INVITE RURI=sip:.... Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: is_uri_host_local(): Branch is missing, error in script Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Call to foreign domain - M=INVITE RURI=sip:.... Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: Request leaving server, D-URI='' - M=INVITE RURI=sip:.... Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: ERROR:tm:t_forward_nonack: no branch for forwarding Jul 18 18:55:26 proxy /usr/sbin/openser[5620]: ERROR:tm:w_t_relay: t_forward_nonack failed -------------------------------------------------------------------------- How can I solve this problem? Attached the routing section of openser.cfg (full file was too big for mailing list). Thanks in advance. Best regards. -- Antonio

17 years, 5 months

[Serusers] client register

by raid＠gmx.net

hi my scenario. (ser_0.8.14) client with dynamic ip register to ser, the client change the dynamic ip end register to ser. ser has now two entries for this client and no call comes through. if I delete the first register(old) the call comes through. is there a possibility the older entry to delete if the same client new register thx raid -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail

17 years, 5 months

[OpenSER-Users] a problem with IPV6 and NAT

by Lee Jacky

Hi,everyone. Now I am using mediaproxy to solve NAT,and rtpproxy to solve IPV6. When they are configured separately, each can work correctly. However, if I configure them together in one openser.cfg, they will conflict with each other. Have anyone solve IPV6 and NAT together? Any advice will be appreciated! ___________________________________________________________ 抢注雅虎免费邮箱3.5G容量，20M附件！ http://cn.mail.yahoo.com

17 years, 5 months

[OpenSER-Users] SipSpy Usage

by Jon Steer

I have gotten sipSpy setup on two systems, but I am not seeing any traffic. I know that traffic is happening and that if I use ngrep I can see traffic correctly. The only thing I can think of is that my regexp expression isn't right. My password file is auser:badpass:admin:.*@foo.local This should get me all messages with sip:baz@foo.local, but I'm not seeing anything. Should I just see INVITE sequences? Should I see registrations? Should I see presence? What am I missing? thanks, jon

17 years, 5 months

[Serusers] choosing gateway for each country code

by Nhadie Ramos

Hi All, Is there a way to choose which gateway i send the traffic to depending on the dialed number? e.g if 001XXXXXXXXX route to 10.10.10.1 and if 0065XXXXXXXXXX route it to 10.10.10.2 is that possible? thank you regards, nhadie

17 years, 5 months

[OpenSER-Users] Presence without registration

by Serhat Demir

Dear OpenSER users, I want to use OpenSER as a Presence Server. Let me first describe my network; I am responsible from the network of a Internet Telephony Service Company, and our customers generally use SIP devices, sometimes softphones. What I want to do is also let my customers IM each other. I have a SIP Proxy as SCB and all my customers are registered there. What I am trying to do is to redirect incoming SUBSCRIBE and PUBLISH packets coming to my SIP Proxy to OpenSER and when OpenSER sends the NOTIFY packet back to SIP Proxy, redirect it to the customer. I still could not manage to get the NOTIFY packet from OpenSER but its not the main point here. Main point is, will presence work with this scenario? Does OpenSER needs the clients to be registered to itself to handle SUBSCRIBE packets? Or its just enough for OpenSER to recieve SUBSCRIBE packets and response with NOTIFY packets? I will appreciate your ideas, thoughts and advices. Thanks in advance. -S

17 years, 5 months

[OpenSER-Users] Can Presence module work alone?

by KevinKinnan

I build Openser Presence module and it works well. The cfg file is the same content as shown on this website "http://uctimsclient.berlios.de/openser.cfg". I change the listen IP address, module path, and comment `loadmodule "registrar.so"`(coz I just want it work as a Presence AS). The problem is, I want to implement Presence by using a sip client(designed by Jain-1.2-NIST) to talk with Presence Module. As I said, the Presence AS doesn't have registrar module. It just works as Presence server with a open port 5065. If the sip client directly sends PUBLISH or SUBSCRIBE request(I'll deal with the structure of request) to the Presence AS, does the server response to the sip client with NOTIFY?Any hint would be helpful!!!CheersKevin, _________________________________________________________________ 中国十大热门旅游景点 http://search.msn.com/results.aspx?q=%E4%B8%AD%E5%9B%BD%E5%8D%81%E5%A4%A7%E…

17 years, 5 months

[Serusers] conjunction from ser to a sip provider

by julia heller

Hi at all, i'll hope anybody can tell me, how i can make a conjunction from ser to a sip provider? What changes must be made in the ser.cfg? Kind regards, Julia -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail

17 years, 5 months

← Newer
1
...
6
7
8
9
10
11
12
...
27
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2007