sr-users July 2007

sr-users@lists.kamailio.org

163 participants
262 discussions

[OpenSER-Users] Help!
by Gerardo Gonzalez 05 Jul '07

05 Jul '07

Regards, It's possible to debug errors on openser.cfg file, when I try to start my server? Actually I'm trying to configure Asterisk 1.4.6 and Openser 1.1.0-9etch1, but I got the next error: Not starting openser: invalid configuration file! Thanks!! GJGM

2 1

[Serusers] XLITEPHONE PROBLEM
by Adeyeye Michael 04 Jul '07

04 Jul '07

Kindly help me check this: root@micadeyeye:/usr/src# cd xten-xlite/ root@micadeyeye:/usr/src/xten-xlite# ls README xtensoftphone root@micadeyeye:/usr/src/xten-xlite# ./xtensoftphone I/O warning : failed to load external entity "/root/.Xscrc" Warning: /dev/dsp appears to be a valid audio device, but I cannot open it. Please ensure that no other applications are using the audio device (perhaps by trying ``lsof /dev/dsp''). -- Mike

4 3

[OpenSER-Users] Wrong CSeq in NOTIFY after presence subscription refresh
by Michel de Boer 04 Jul '07

04 Jul '07

I perform the following scenario (openser v1.2.1): 1) Send a SUBCRIBE to openser for the presence event with expires = 3600 2) The subscription is established. Openser sends a NOTIFY with PIDF body. The sequence number in the CSeq header is 516. 3) 1 hour later I send an in-dialog SUBSCRIBE to extend the subscription for another hour. 4) openser sends a NOTIFY having sequence number 516 in the CSeq header. The sequence number of the NOTIFY should have been higher (517) as the sequence numbers of in-dialog messages should increase. I think this is a bug. Regards, Michel -- Michel de Boer www.twinklephone.com

2 2

Re: [OpenSER-Users] The Via Header of CANCEL Message
by fancy 04 Jul '07

04 Jul '07

Hi Klaus: RFC 3665 page 54 line 4: A CANCEL constructed by a client MUST have only a single Via header field value matching the top Via value in the request being cancelled. and RFC 3665 at page 53: CANCEL is referred to as a "hop-by-hop" request, since it is responded to at each stateful proxy hop. and RFC 3665 at page 21: Client: A client is any network element that sends SIP requests and receives SIP responses. Clients may or may not interact directly with a human user. User agent clients and proxies are clients. So, for my opinion, the role of proxy in this case of RFC 3665 section 3.8 is a client when it sends CANCEL message to Bob. If I misunderstand any RFC meanings, please correct me. Thank you very much. Best Regards, Fangyu Ling > fancy wrote: >> According to RFC 3665 section 3.8 and RFC 3261 section 9, >> there is only one via header in CANCEL message >> (message F11, F13 at page 72 of RFC 3665). > > Hi! > > I could find it in RFC 3665, but not in 3261. Where exactly in RFC 3261 > is mentioned that the CANCEL has only 1 Via header? > > Further, the example has only one Via header - but I could not find any > definition if this is a MUST or not. > >> How can I remove the 2nd via header? > > You would have to modify tm module and change the code which generates > the CANCEL message. > > regards > klaus >

3 6

[OpenSER-Users] how to see sip messages in openser
by Rizwan Hisham 04 Jul '07

04 Jul '07

Hi all, i want to see what sip messages are sent to and from openser. just like we can see them on asterisk cli. Is there a way to do that in openser? -- Best Regards Rizwan Hisham Software Engineer AXVOICE Inc. www.axvoice.com

4 3

[OpenSER-Users] DLG_count error
by [ACTIVENDY] NOC 04 Jul '07

04 Jul '07

Hi, I want to limit the simultaneous calls on my Openser server. I use this code to limit the calls: ..... isten=xxx.xxx.xxx.xxx listen=xxx.xxx.xxx.xxx. # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://xxxxxxxxxxxxxx loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/uri_db.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" loadmodule "/usr/lib/openser/modules/uri.so" loadmodule "/usr/lib/openser/modules/domain.so" loadmodule "/usr/lib/openser/modules/textops.so" loadmodule "/usr/lib/openser/modules/avpops.so" loadmodule "/usr/lib/openser/modules/xlog.so" loadmodule "/usr/lib/openser/modules/dispatcher.so" loadmodule "/usr/lib/openser/modules/permissions.so" loadmodule "/usr/lib/openser/modules/acc.so" loadmodule "/usr/lib/openser/modules/dialog.so" modparam("dispatcher", "list_file", "/etc/openser/dispatcher.list") modparam("acc|auth_db|uri_db|usrloc|permissions", "db_url", "mysql://xxxxxxxxxxx") modparam("avpops","db_url","mysql://xxxxxxxxxxxxxxxx) modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) modparam("tm", "wt_timer", 30) modparam("tm", "fr_timer", 2) modparam("tm", "fr_inv_timer", 120) #modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "default_allow_file", "/etc/openser/permissions.allow") modparam("permissions", "db_mode", 1) modparam("dispatcher", "flags", 2 ) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("dispatcher", "cnt_avp_id", 4) modparam("avpops","avp_table","gw_avail_port") modparam("dialog", "enable_stats", 1) modparam("dialog","dlg_flag",3) ..... if (avp_check("$DLG_count", "gt/i:10")) { sl_send_reply("403","no more calls accepted"); exit; } But I get the following error when I try to call and it doesn't work: 8(4826) xl_get_spec_value: error - null sp->itf 8(4826) ERROR:avpops:ops_check_avp: cannot get src value My Openser version is 1.1.1 Thanks

2 1

[OpenSER-Users] DLG_count error
by [ACTIVENDY] NOC 04 Jul '07

04 Jul '07

1 0

[OpenSER-Users] DLG_count error
by [ACTIVENDY] NOC 04 Jul '07

04 Jul '07

1 0

[OpenSER-Users] RE: SIP Trunking in openser
by Dan-Cristian Bogos 04 Jul '07

04 Jul '07

Hi Rizwan, there can be more ways of implementing your scenario. Here are two of most popular ones: 1. Using rewritehost("IP_OF_YOUR_PROVIDER") and then call t_relay() to send the request out. 2. Using directly t_relay("IP_OF_YOUR_PROVIDER") without rewriting the RURI host. The difference between the two approaches is that in the case of rewritehost() function u will alter the domain of RURI forcing it to be the ip address of your provider. In the second case, u will no longer alter the domain, but instruct t_relay() not to find the route by itself (no dns lookup or any other way) but send the request as it is to the IP which u specify specify. For more info, please consult the documentation of the two functions: http://openser.org/dokuwiki/doku.php/core-cookbook:1.2.x#rewritehost_sethost http://www.openser.org/docs/modules/1.2.x/tm.html#AEN345 Hope that helps, DanB On 7/4/07, Rizwan Hisham <rizwanhasham(a)gmail.com> wrote: > Hi all, > i tried to throw all my INVITE messages to an external IP address by using > the rewritehost function. but calls from my openser dont passthru. i need > to implement a sip trunk and throw my calls thru sip trunk to an external > ip. how should i do this? I am a new user, so whatever your answer is, plz > try to elaborate a little more. thanx > > -- > Best Regards > Rizwan Hisham > Software Engineer > AXVOICE Inc. > www.axvoice.com > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[OpenSER-Users] RE: [Users] Interaction Presence Agent - Presence User Agent
by Schumann Sebastian 04 Jul '07

04 Jul '07

Dear Anca, Dear all After several trials I didn't come to a conclusion how to use the EXPIRES -1 with PUA_MI. All the time I enter this value to my FIFO file, the answer is pua_mi:mia_pua_publish: invalid expires parameter. This seems also logical to me, as source code of mi_func.c leads there on lines 97-102 (the expires is smaller than 0). Is there a support for PUA of the negative expires field, that is not implemented in PUA_MI? As I thought, PUA cannot be used standalone is there something I did not pay attention to? Any hints? Thanks! Regards Sebastian -----Original Message----- From: Anca-Maria Vamanu [mailto:anca@voice-system.ro] Sent: Friday, May 25, 2007 11:14 AM To: Schumann Sebastian Cc: users(a)openser.org Subject: Re: [Users] Interaction Presence Agent - Presence User Agent Hello, There is already a means to do that but in the trunk version. You should just give the command with expires -1 and the pua module will refresh Publish until you give a command with expires 0. regards, Anca Schumann Sebastian wrote: > Dear all, > > > > I have a question for understanding: I have implemented one OpenSER as > Registrar and one OpenSER as Presence Agent plus XCAP Server 1.0.0. > This is all working so far with newest SVN Release (Big Thanks to > Ovidiu and Anca for the hint) of OpenSER. > > > > Now I want to deploy a Web-Front-End for user interaction with the > Presence Core, because not all clients used are SIMPLE capable. User > of non-capable devices should be able to just login and change their > presence state. They do not necessarily have to be registered at the > registrar, why PUA+ pua_usrloc on registrar side is no choice. > > > > I was thinking about another OpenSER deployed as PUA plus the pua_mi > module for a solution. It gets commands from Web-Frontend via PHP, > forwarded to the FIFO with pua_mi module. The problem I have now is > that the messages are sent just once. Means a user changes his > presence state, PUA sends a PUBLISH to PA but after the expiry the > user appears to be offline. > > > > Is there any possiblitiy to let the PUA send messages constantly, when > the user selects online - means all the time until offline is > selected? I was thinking about many possiblities (cronjob or > shellscript running all the time during online time and sending data > to FIFO) but they are more or less just work-arounds. > > > > Best regards > > Sebastian > > > > **Sebastian Schumann** > > Diploma Student Architecture and Design Department > > > > Slovak Telekom, a. s. > > T-Com, Operations Unit > > Production and Service Division > > Innovations and Enterprise Solution Subunit > > > > Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia > > Office: Room 232, Jarabinkova 1, 821 09 Bratislava, Slovakia > > > > +421 910 643010 (mobile) > > > > sebastian.schumann(a)t-com.sk <mailto:sebastian.schumann@t-com.sk> > > http://www.t-com.sk > >----------------------------------------------------------------------- - > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

2 1

← Newer
1
...
20
21
22
23
24
25
26
27
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2007