sr-users June 2007

sr-users@lists.kamailio.org

191 participants
314 discussions

[OpenSER-Users] Integrating XCAP-lite with openser

by ashok.akumar＠wipro.com

Hi all, I have downloaded XCAP-lite to support XCAP. I already have openser running. But the problem is how to integrate XCAP-lite with openser? I guess for that I need to configure config.php file in xcap-root directory of XCAP-lite. Can anyone tell me how to configure config.php or what i need to do for integrating XCAP-lite with openser? Any help will be appreciated. Rgds, Ashok The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

16 years, 10 months

[OpenSER-Users] mysql.so not included in 0.9.5

by Rizwan Hisham

Hi all, I installed the openser 0.9.5. when i tried to include mysql module in openser.cfg, it gave me this error. 0(8531) ERROR: load_module: could not open module </usr/local/lib/openser/modules/mysql.so>: /usr/local/lib/openser/modules/mysql.so: cannot open shared object file: No such file or directory 0(8531) parse error (28,13-14): failed to load module I checked the source directory. It has the mysql module files included in its source then why it did not compile them and place mysql.so in the required directory. This is how i installed: -->make -->make modules -->make all -->make install Anybody with answeres ??? -- Best Regards Rizwan Hisham Software Engineer AXVOICE Inc. www.axvoice.com

16 years, 10 months

Subject=[OpenSER-Users] openser.cfg debug howto

by Patrick Miccio

just use: /path/to/openser -c -f /path/to/openser.cfg cheers, Patrick.

16 years, 10 months

[OpenSER-Users] Re: A problem with CDRTool

by Dan-Cristian Bogos

Hi Jacky, looks like your rating engine is not running. Did u install and start it? I am using debian packages for cdrtool and it is automatically installed. If u used same, all u must do is edit the /etc/defaults/cdrtool to enable both ratingengine as well as memcached and then start cdrtool with /etc/init.d/cdrtool start. Hope that helps. Cheers, DanB

16 years, 10 months

[OpenSER-Users] accounting parallel invite

by yoshiki

hello ! I am weak in English. Please teach it about a accounting request-uri on parallel invite. UAC ----> OpenSER ----> UAS1 | ----> UAS2 1. UAC call to UAS. e.g. from: UAC(a)test.com -> to: UAS(a)test.com 2. avpop module in OpenSER search UAS. 3. hit UAS1 and UAS2. 4. I enumerate contact address that was found from a location table to request-URI. 5. OpenSER relay to UAS1 and UAS2. 6. UAS1 pick up call. 7. acc module account to database src_user UAC dst_user UAS1 But I want to account parallel number (UAS). How may you write in UAS to database ? -------------------------------------- Start Yahoo! Auction now! Check out the cool campaign http://pr.mail.yahoo.co.jp/auction/

16 years, 10 months

[OpenSER-Users] Openser as reverse proxy

by hdpml

Dear Mailinglist, I am a rookie in SER and joined this mailinglist a few minutes ago. Hope you can help me with my question. I found ser at my search for a sip / rtp proxy. I want to install the following scenario: client -> Internet or WLAN -> SER proxy + rtpproxy(DMZ) -> Asterisk (Internal LAN) Is it possible with openser that the authentication is passed through to asterisk and openser accept the call if the user is valid? My idea is, not to have any userdata on the SER proxy. I just want that the proxy forwards the request to the asteriskserver and checks if the REGISTER is OK or not. If the user is invalid, the proxy should deny requests from this user to the asteriskserver. If this will be possible, is it possible to integrate encryption of RTP and SIP too? Like a http reverseproxy? Thank you very much. Dominic HDPnet GmbH Erwin-Rohde-Str. 18 69120 Heidelberg Geschaeftsfuehrer: Marc Hermann Registergericht: Mannheim HRB 337012 Sitz: Heidelberg Umsatzsteuer ID Nr.: DE 211 257 470 www.hdpnet.de Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtuemlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

16 years, 10 months

[OpenSER-Users] The Via Header of CANCEL Message

by fancy

According to RFC 3665 section 3.8 and RFC 3261 section 9, there is only one via header in CANCEL message (message F11, F13 at page 72 of RFC 3665). But when I ran the similar scenario(through one proxy), I got two via header in CANCEL message such as following: CANCEL sip:UA12@node11.under.test.com;transport=udp SIP/2.0 Record-Route: <sip:192.0.50.50;lr=on;ftag=11380> Via: SIP/2.0/UDP ss.under.test.com;branch=z9hG4bKd068.25909417.0 Via: SIP/2.0/UDP node.under.test.com:5060;received=192.0.10.10;branch=z9hG4bKPUA4295483 Max-Forwards: 69 From: UA11 <sip:UA11@under.test.com>;tag=11380 To: <sip:UA12@under.test.com> Call-ID: 11380(a)tom.example.com CSeq: 4 CANCEL Content-Length: 0 P-hint: usrloc applied How can I remove the 2nd via header? Thank you Best Regards, Fangyu Ling

16 years, 10 months

Re: [OpenSER-Users] Openser 1.2.1 with FreeRADIUS 1.1.6 with MySQL 5.0.41

by Neeraj Gupta

16 years, 10 months

[OpenSER-Users] A problem with CDRTool

by Lee Jacky

Hi,all. I have met a problem with CDRTool. I am using openser1.1+CDRTool5.1.4. When I open CDRTool's web page,and click the Rating link,then I get lots of records, but the following warning is also showed: Warning: fsockopen() [function.fsockopen]: unable to connect to IP-Address:9024 in /usr/local/apache/htdocs/CDRTool/rating_lib.phtml on line 2492 | Cannot connect to rating engine IP-Address:9024 Had anyone met this before? Any tips will be appreciated. ___________________________________________________________ Mp3疯狂搜-新歌热歌高速下 http://music.yahoo.com.cn/?source=mail_mailbox_footer

16 years, 10 months

Re: [Serusers] How SER communicate to other SIP server

by roayu

Hi, Olaf! I'll have a look and try on it. Thanks. Best regards, Roa Yu -----Original Message----- From: Olaf Bergmann [mailto:Olaf.Bergmann@freenet-ag.de] Sent: Thursday, June 28, 2007 5:34 PM To: roayu Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] How SER communicate to other SIP server roayu wrote: > Hi, Olaf! > > Ok, but which section that I need to concentrate on the most? I've search > through the whole documentation and I can't find the configuration/setting > on the ser.cfg file. Really appreciate on your help... Look at the "Hello World ser.cfg" <http://siprouter.onsip.org/doc/gettingstarted/ch06.html>. For unknown SIP domains, route[1] does the DNS-based forwarding mentioned before. You should give it a try and see how it works. HTH, Olaf

16 years, 10 months

← Newer
1
2
3
4
5
6
7
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2007