Hi,
Can anyone help me with my problem. I configure SER
and Asterisk on different machine.
Objective are calling SER Client ---> Asterisk Client
and Asterisk Client ---> SER client.
Problem is when I call SER client using my Asterisk
client it can successfully ring the ser client but
when I pickup the phone, it doesn't have any voice.
Error occured on my messages log.
========================
Jun 5 23:47:14 ser ser[7263]: Warning: sl_send_reply:
I won't send a reply for ACK!!
Jun 5 23:47:14 ser ser[7263]: ERROR: sl_reply_error
used: I'm terribly sorry, server error occurred (1/SL)
Jun 5 23:47:14 ser ser[7266]: ERROR: mk_proxy: could
not resolve hostname: "@192.168.1.41"
Jun 5 23:47:14 ser ser[7266]: ERROR: uri2proxy: bad
host name in URI
<sip:@192.168.1.41;ftag=as3add8ffb;lr=on>
Jun 5 23:47:14 ser ser[7266]: ERROR:
t_forward_nonack: failure to add branches
========================
Thanks in advanced!
Regards,
Rjey
____________________________________________________________________________________
Get the free Yahoo! toolbar and rest assured with the added security of spyware protection.
http://new.toolbar.yahoo.com/toolbar/features/norton/index.php
All,
I want to announce a bunch of new features for sip:wizard, the OpenSER
configuration generator. Beside some improvements, the focus for this
round was on conditional call forwarding.
For a detailed description, see:
http://www.sipwise.com/news
To try them out, visit:
http://www.sipwise.com/wizard
Best regards,
Andreas
Hi Everybody,
I have a question regarding avp_check() and reverse-DNS-Lookups: I
wanted to do the following in the routing logic (simplified):
loose_route();
if (avp_check("$dd","re/192\.168.123.(1|2)/g")) {
The idea was to allow flexible re-routing to another proxy in case of
loose-routing. One proxy would be the alias of the other, and so far,
everything was fine.
What happened now: We had a customer, who's IP could not be
"reverse-lookuped" properly, the DNS-Server ran into an timeout. After
we removed the code-snipplet from the routing, everything was fine
(again); except this functionality drawback.
I believe, in OpenSER 1.2 i could replace it with the following, to
avoid the reverse-lookups:
if (($dd == 192.168.123.1) || ($dd == 192.168.123.2)) {
Am i right? Would this work?
Can i somehow avoid the reverse-lookup in OpenSER 1.1?
Thank you everybody,
Carsten
Hi,
I'm going crazy with this problem, so maybe anyone here can see any
error or can give a hint how to debug this.
I've two clients behind (the same) NAT. INVITE goes thru, so does 100
and 180. But the 200 isn't relayed because of the following syslog error:
./sbin/openser[23933]: ERROR: udp_send:
sendto(sock,0x81816a8,814,0,0xb5b7f168,16): Operation not permitted(1)
./sbin/openser[23933]: msg_send: ERROR: udp_send failed
I can't find any error (the two Via headers are exactly the same), so
here is the 180 which is relayed without problems, and below the 200,
which causes the error:
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 84.19.176.11;branch=z9hG4bK6351.1b30ad43.0
Via: SIP/2.0/UDP
192.168.123.100:2083;received=83.65.24.161;branch=z9hG4bK-kq6qyyeowiei;rport=12499
From: "Foo Bar" <sip:foo1000@linguin.org>;tag=xuu6a2tp6b
To: <sip:2000@linguin.org;user=phone>;tag=2091138726
Call-ID: 3c27e5729c40-csdi3p954zyn@snom360-0004132306CE
CSeq: 2 INVITE
Server: Cisco ATA 186 v3.1.1 atasip (040629A)
Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER
Content-Length: 0
SIP/2.0 200 OK
Via: SIP/2.0/UDP 84.19.176.11;branch=z9hG4bK6351.1b30ad43.0
Via: SIP/2.0/UDP
192.168.123.100:2083;received=83.65.24.161;branch=z9hG4bK-kq6qyyeowiei;rport=12499
Record-Route: <sip:84.19.176.11;lr=on;ftag=xuu6a2tp6b;nat=yes>
From: "Foo Bar" <sip:foo1000@linguin.org>;tag=xuu6a2tp6b
To: <sip:2000@linguin.org;user=phone>;tag=2091138726
Call-ID: 3c27e5729c40-csdi3p954zyn@snom360-0004132306CE
CSeq: 2 INVITE
Contact: <sip:foo2000@192.168.123.103:5060;transport=udp>
Server: Cisco ATA 186 v3.1.1 atasip (040629A)
Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER
Supported: replaces
Content-Length: 204
Content-Type: application/sdp
v=0
o=foo2000 11828 11828 IN IP4 192.168.123.103
s=ATA186 Call
c=IN IP4 192.168.123.103
t=0 0
m=audio 16384 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000/1
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Any ideas?
Regards,
Andreas
PS: this happens with both OpenSER 1.1 and 1.2
Hi All,
Finally I was able to get the presence server up and running with the
openims and also able to do some basic tests with xlite. But the problem
I am seeing is when I change the status of a user (for ex from available
to busy), it sends a publish event to openser and now I expect the
openser to trigger a Notify to the contacts.
But this does not seem to be happening and I see some errors as below,
1(5293) SIP Request:
1(5293) method: <PUBLISH>
1(5293) uri: <sip:kiran@mkd149633.wipro.com>
1(5293) version: <SIP/2.0>
1(5293) parse_headers: flags=2
1(5293) Found param type 232, <branch> = <z9hG4bK4ac2.743db705.0>;
state=16
1(5293) end of header reached, state=5
1(5293) parse_headers: Via found, flags=2
1(5293) parse_headers: this is the first via
1(5293) After parse_msg...
1(5293) preparing to run routing scripts...
1(5293) parse_headers: flags=100
1(5293) Found param type 232, <branch> = <z9hG4bK4ac2.bd17e9a7.0>;
state=16
1(5293) end of header reached, state=5
1(5293) parse_headers: Via found, flags=100
1(5293) parse_headers: this is the second via
1(5293) Found param type 234, <received> = <10.117.2.44>; state=6
1(5293) Found param type 232, <branch> =
<z9hG4bK-d87543-52058d7c8c660725-1--d87543->; state=6
1(5293) Found param type 235, <rport> = <5186>; state=16
1(5293) end of header reached, state=5
1(5293) parse_headers: Via found, flags=100
1(5293) DEBUG:maxfwd:is_maxfwd_present: value = 15
1(5293) DEBUG: t_newtran: T on entrance=0xffffffff
1(5293) parse_headers: flags=ffffffffffffffff
1(5293) DEBUG:parse_to:end of header reached, state=10
1(5293) DBUG:parse_to: display={"Kiran"},
ruri={sip:kiran@mkd149633.wipro.com}
1(5293) DEBUG: get_hdr_field: <To> [40];
uri=[sip:kiran@mkd149633.wipro.com]
1(5293) DEBUG: to body ["Kiran"<sip:kiran@mkd149633.wipro.com>
]
1(5293) get_hdr_field: cseq <CSeq>: <95> <PUBLISH>
1(5293) DEBUG: get_hdr_body : content_length=449
1(5293) found end of header
1(5293) parse_headers: flags=78
1(5293) t_lookup_request: start searching: hash=11428, isACK=0
1(5293) DEBUG: RFC3261 transaction matching failed
1(5293) DEBUG: t_lookup_request: no transaction found
1(5293) parse_headers: flags=ffffffffffffffff
1(5293) PRESENCE:handle_publish: SIP-If-Match found
1(5293) PRESENCE:handle_publish: existing etag = a.1181035469.5298.17
1(5293) PRESENCE: handle_publish: 'expires' found
1(5293) PRESENCE: handle_publish: lexpire= 60
1(5293) PRESENCE: handle_publish: 'To' header ALREADY PARSED:
<sip:kiran@mkd149633.wipro.com>
1(5293) parse_headers: flags=ffffffffffffffff
1(5293) PRESENCE:publ_send200ok: send 200OK reply
1(5293) PRESENCE:publ_send200ok: etag= a.1181035469.5298.17 - len= 20
1(5293) parse_headers: flags=ffffffffffffffff
1(5293) check_via_address(10.154.20.45, 10.154.20.45, 0)
1(5293) PRESENCE: get_subs_dialog:The query for subscribtion for
[user]= kiran,[domain]= mkd149633.wipro.com for [event]= presence
returned no result
1(5293) PRESENCE:query_db_notify: Could not get subs_dialog from
database
1(5293) PRESENCE:update_presentity: Could not send Notify
1(5293) DEBUG: cleanup_uac_timers: RETR/FR timers reset
1(5293) DEBUG: add_to_tail_of_timer[2]: 0xb609b268 (6756)
1(5293) DEBUG:tm:UNREF_UNSAFE: after is 0
1(5293) DEBUG:destroy_avp_list: destroying list (nil)
1(5293) receive_msg: cleaning up
5(5299) DEBUG: timer routine:2,tl=0xb609b268 next=(nil), timeout=6756
5(5299) DEBUG: wait_handler : removing 0xb609b220 from table
5(5299) DEBUG: delete transaction 0xb609b220
5(5299) DEBUG: wait_handler : done
Can you please help me on this. Let me know if you need some log
files/traces.
Do I require to do some configuration changes or any additions to the
database for this.
Thanks,
Kiran.
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email.
www.wipro.com
Dear all,
I got an error while using openser to set up the presence server in my
Debian post:
I have installed openser_1.2.0-0_i386.deb, but i don't find mysql.so in
/usr/lib/openser/modules. So i go install the
openser-mysql-module_1.2.0-0_i386.deb.
It is installed but with a problem of dependance :
openser-mysql-module depends libmysqlclient14
while libmysqlclient15 installed in my post.
however, i can run the script openser_mysql to set up the data base.
But when i restart OpenSER after edit the /etc/openser.cfg to support mysql,
i got error like this:
pc7:/usr/lib/openser/modules# /etc/init.d/openser restart
Not starting openser: invalid configuration file!
0(15900) ERROR: load_module: could not open module
</usr/lib/openser/modules/mysql.so>: libmysqlclient.so.14: cannot open
shared object file: No such file or directory
0(15900) parse error (44,13-14): failed to load module
ERROR: bad config file (1 errors)
0(15900) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not
allocated -> nothing to destroy
But libmysqlclient14 is obsolete in the Debian repositories, there is only
libmysqlclient15.
Don't you have encounter the similar problem?
Please help me. Thanks!
My linux distribution is Linux 2.6.18-4-686.
li
_________________________________________________________________
Gagnez des pc Windows Vista avec Live.comhttp://www.image-addict.fr/
I already define the hostname of both machines and I
created also an internal DNS wherein I define the
following:
==================================
# dig -t SRV _sip._udp.rjey.ph
; <<>> DiG 9.2.4 <<>> -t SRV _sip._udp.rjey.ph
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id:
13180
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 3, AUTHORITY:
2, ADDITIONAL: 5
;; QUESTION SECTION:
;_sip._udp.rjey.ph. IN SRV
;; ANSWER SECTION:
_sip._udp.rjey.ph. 10800 IN SRV 0 0 5060
asterisk.rjey.ph.
_sip._udp.rjey.ph. 10800 IN SRV 0 0 5060
ser.rjey.ph.
;; AUTHORITY SECTION:
rjey.ph. 10800 IN NS ns1.rjey.ph.
rjey.ph. 10800 IN NS ns2.rjey.ph.
;; ADDITIONAL SECTION:
ser.rjey.ph. 10800 IN A 192.168.1.41
asterisk.rjey.ph. 10800 IN A 192.168.1.247
ns1.rjey.ph. 10800 IN A 192.168.1.7
;; Query time: 46 msec
;; SERVER: 192.168.1.7#53(192.168.1.7)
;; WHEN: Tue Jun 5 18:32:58 2007
;; MSG SIZE rcvd: 292
============================
What else should I do????
Thanks,
Rjey
Date:
Tue, 05 Jun 2007 07:24:27 -0400
From:
"SIP" <sip(a)arcdiv.com> Add to Address Book Add
Mobile Alert
To:
"Rjey Nomer" <rjeynomer(a)yahoo.com>
CC:
serusers(a)iptel.org
Subject:
Re: [Serusers] SER and Asterisk
This means you can't resolve 192.168.1.247 from your
SER server. Try
adding an entry for it into /etc/hosts to see if you
can bypass DNS.
N.
Rjey Nomer wrote:
> Hi all,
>
> Hope someone can help me with this.
>
> The main objective are to make Asterisk and SER
> communicate with each other. Call SER--> Asterisk
and
> Asterisk--> SER.
>
> I used the example configuration for pstn as base on
> all the docs, it is how we can make ser and asterisk
> work. As instructed on the docs, we just need to add
> the IP address of the PSTN gateway on the trusted
> database of our SER, in this case, asterisk is our
> PSTN gateway.
>
> ===================
> mysql> insert into trusted values
> ("192.168.1.247","any","^sip:.*$");
> ===================
>
> On the asterisk (trixbox) server, below are the
> configuration I defined:
>
> Outgoing Setting:
> Trunk Name: serout
> Peer Details:
> ====================
> allow=all
> dtmfmode=rfc2833
> host=192.168.1.41
> insecure=no
> type=peer
> ====================
>
> I can ring any number on my SER Server using any
> number on my Asterisk, problem is when I pick-up the
> phone I cannot hear voice and according to the logs
as
> listed below, it is hanging-up and something like
> "Unresolvable destination".
>
>
> SER NGREP RESULT
> #ngrep -n 5060 -d eth0 3242194ngrep -n 5060 -d eth0
> 3242194
> =================================
> U 192.168.1.41:5060 -> 192.168.1.247:5060
> SIP/2.0 478 Unresolvable destination (478/TM)..Via:
> SIP/2.0/UDP
>
192.168.1.247:5060;branch=z9hG4bK580c7aec;rport=5060..F
> rom: "3000"
> <sip:3000@192.168.1.247>;tag=as7693144e..To:
> <sip:3242194@192.168.1.41>;tag=419e8..Call-ID:
> 5784a2681edd513
> c59c77e20512b499d@192.168.1.247..CSeq: 103
> INVITE..Server: Sip EXpress router (0.9.3
> (i386/linux))..Content-Length: 0..
> Warning: 392 192.168.1.41:5060 "Noisy feedback
> tells: pid=9413 req_src_ip=192.168.1.247
> req_src_port=5060 in_uri=sip:3
> 242194@192.168.1.6:52961;user=phone
> out_uri=sip:3242194@192.168.1.6:52961;user=phone
> via_cnt==1"....
> =================================
>
> Asterisk Logs
> =================================
> -- Executing NoOp("SIP/3000-08fd48b8", "CallerID
set
> to "3000" <3000>") in new stack
> -- Executing Set("SIP/3000-08fd48b8",
> "GROUP()=OUT_2") in new stack
> -- Executing GotoIf("SIP/3000-08fd48b8",
"0?108")
> in new stack
> -- Executing Set("SIP/3000-08fd48b8",
> "DIAL_NUMBER=3242194") in new stack
> -- Executing Set("SIP/3000-08fd48b8",
> "DIAL_TRUNK=2") in new stack
> -- Executing AGI("SIP/3000-08fd48b8",
> "fixlocalprefix") in new stack
> -- Launched AGI Script
> /var/lib/asterisk/agi-bin/fixlocalprefix
> fixlocalprefix: Could not parse
> /etc/asterisk/localprefixes.conf
> -- AGI Script fixlocalprefix completed,
returning
> 0
> -- Executing Set("SIP/3000-08fd48b8",
> "OUTNUM=3242194") in new stack
> -- Executing Set("SIP/3000-08fd48b8",
> "custom=SIP/Serout") in new stack
> -- Executing GotoIf("SIP/3000-08fd48b8", "0?16")
> in new stack
> -- Executing Dial("SIP/3000-08fd48b8",
> "SIP/Serout/3242194|120|r") in new stack
> -- Called Serout/3242194
> -- SIP/Serout-08fda208 is ringing
> -- SIP/Serout-08fda208 answered
SIP/3000-08fd48b8
> -- Attempting native bridge of SIP/3000-08fd48b8
> and SIP/Serout-08fda208
> -- Got SIP response 478 "Unresolvable
destination
> (478/TM)" back from 192.168.1.41
> == Spawn extension (macro-dialout-trunk, s, 14)
> exited non-zero on 'SIP/3000-08fd48b8' in macro
> 'dialout-trunk'
> == Spawn extension (macro-dialout-trunk, s, 14)
> exited non-zero on 'SIP/3000-08fd48b8'
>
> =================================
>
> Can anyone help me resolve this problem.
>
> Thanks in advanced.
>
> Rjey
>
>
>
>
____________________________________________________________________________________
> Looking for a deal? Find great prices on flights and
hotels with
Yahoo! FareChase.
> http://farechase.yahoo.com/
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
____________________________________________________________________________________
Don't get soaked. Take a quick peak at the forecast
with the Yahoo! Search weather shortcut.
http://tools.search.yahoo.com/shortcuts/#loc_weather
Hi all,
Hope someone can help me with this.
The main objective are to make Asterisk and SER
communicate with each other. Call SER--> Asterisk and
Asterisk--> SER.
I used the example configuration for pstn as base on
all the docs, it is how we can make ser and asterisk
work. As instructed on the docs, we just need to add
the IP address of the PSTN gateway on the trusted
database of our SER, in this case, asterisk is our
PSTN gateway.
===================
mysql> insert into trusted values
("192.168.1.247","any","^sip:.*$");
===================
On the asterisk (trixbox) server, below are the
configuration I defined:
Outgoing Setting:
Trunk Name: serout
Peer Details:
====================
allow=all
dtmfmode=rfc2833
host=192.168.1.41
insecure=no
type=peer
====================
I can ring any number on my SER Server using any
number on my Asterisk, problem is when I pick-up the
phone I cannot hear voice and according to the logs as
listed below, it is hanging-up and something like
"Unresolvable destination".
SER NGREP RESULT
#ngrep -n 5060 -d eth0 3242194ngrep -n 5060 -d eth0
3242194
=================================
U 192.168.1.41:5060 -> 192.168.1.247:5060
SIP/2.0 478 Unresolvable destination (478/TM)..Via:
SIP/2.0/UDP
192.168.1.247:5060;branch=z9hG4bK580c7aec;rport=5060..F
rom: "3000"
<sip:3000@192.168.1.247>;tag=as7693144e..To:
<sip:3242194@192.168.1.41>;tag=419e8..Call-ID:
5784a2681edd513
c59c77e20512b499d@192.168.1.247..CSeq: 103
INVITE..Server: Sip EXpress router (0.9.3
(i386/linux))..Content-Length: 0..
Warning: 392 192.168.1.41:5060 "Noisy feedback
tells: pid=9413 req_src_ip=192.168.1.247
req_src_port=5060 in_uri=sip:3
242194@192.168.1.6:52961;user=phone
out_uri=sip:3242194@192.168.1.6:52961;user=phone
via_cnt==1"....
=================================
Asterisk Logs
=================================
-- Executing NoOp("SIP/3000-08fd48b8", "CallerID set
to "3000" <3000>") in new stack
-- Executing Set("SIP/3000-08fd48b8",
"GROUP()=OUT_2") in new stack
-- Executing GotoIf("SIP/3000-08fd48b8", "0?108")
in new stack
-- Executing Set("SIP/3000-08fd48b8",
"DIAL_NUMBER=3242194") in new stack
-- Executing Set("SIP/3000-08fd48b8",
"DIAL_TRUNK=2") in new stack
-- Executing AGI("SIP/3000-08fd48b8",
"fixlocalprefix") in new stack
-- Launched AGI Script
/var/lib/asterisk/agi-bin/fixlocalprefix
fixlocalprefix: Could not parse
/etc/asterisk/localprefixes.conf
-- AGI Script fixlocalprefix completed, returning
0
-- Executing Set("SIP/3000-08fd48b8",
"OUTNUM=3242194") in new stack
-- Executing Set("SIP/3000-08fd48b8",
"custom=SIP/Serout") in new stack
-- Executing GotoIf("SIP/3000-08fd48b8", "0?16")
in new stack
-- Executing Dial("SIP/3000-08fd48b8",
"SIP/Serout/3242194|120|r") in new stack
-- Called Serout/3242194
-- SIP/Serout-08fda208 is ringing
-- SIP/Serout-08fda208 answered SIP/3000-08fd48b8
-- Attempting native bridge of SIP/3000-08fd48b8
and SIP/Serout-08fda208
-- Got SIP response 478 "Unresolvable destination
(478/TM)" back from 192.168.1.41
== Spawn extension (macro-dialout-trunk, s, 14)
exited non-zero on 'SIP/3000-08fd48b8' in macro
'dialout-trunk'
== Spawn extension (macro-dialout-trunk, s, 14)
exited non-zero on 'SIP/3000-08fd48b8'
=================================
Can anyone help me resolve this problem.
Thanks in advanced.
Rjey
____________________________________________________________________________________
Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase.
http://farechase.yahoo.com/
li wang,
a lower version mysql may resolve your problem.
mysql-standard-4.1.22-pc-linux-gnu-i686.tar.gz
======= 2007-06-05 17:22:49============
>Hi Mike,
>
>There isn't mysql.so if i just install the openser_1.2.0-0_i386.deb. (I do
>"locate")
>
>It seem to be a problem of dependence for me.
>Because the openser_1.2.0 depend the libmysqlclient14, but in my Debian
>repositories it is obsolete, there is only libmysqlclient15.
>
>Which version of openser/libmysqlclient/mysqlclient/mysqlserver are you
>using?
>
>Please give me some guidance, thanks.
>
>li
>
>
>>From: "Mike Li" <lzg666(a)gmail.com>
>>To: "li wang" <li.wang119(a)hotmail.com>
>>CC: users(a)openser.org
>>Subject: Re: [Users] pb with install the Openser and Module SQL
>>Date: Tue, 5 Jun 2007 16:57:30 +0800
>>
>>Hi, Wang
>>
>>You can try find the path of mysql.so, then ln it to
>>/usr/lib/openser/modules
>>
>>Hope this will help you to resolve it.
>>
>>
>>Mike
>>
>>
>>
>>
>>On 6/5/07, li wang <li.wang119(a)hotmail.com> wrote:
>>>
>>>Dear all,
>>>
>>>I got an error while using openser to set up the presence server in my
>>>Debian post:
>>>
>>>I have installed openser_1.2.0-0_i386.deb, but i don't find mysql.so in
>>>/usr/lib/openser/modules. So i go install the
>>>openser-mysql-module_1.2.0-0_i386.deb.
>>>
>>>It is installed but with a problem of dependance :
>>>openser-mysql-module depends libmysqlclient14
>>>while libmysqlclient15 installed in my post.
>>>
>>>however, i can run the script openser_mysql to set up the data base.
>>>
>>>But when i restart OpenSER after edit the /etc/openser.cfg to support
>>>mysql,
>>>i got error like this:
>>>
>>>pc7:/usr/lib/openser/modules# /etc/init.d/openser restart
>>>Not starting openser: invalid configuration file!
>>>
>>>0(15900) ERROR: load_module: could not open module
>>></usr/lib/openser/modules/mysql.so>: libmysqlclient.so.14: cannot open
>>>shared object file: No such file or directory
>>>0(15900) parse error (44,13-14): failed to load module
>>>ERROR: bad config file (1 errors)
>>>0(15900) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was
>>>not
>>>allocated -> nothing to destroy
>>>
>>>But libmysqlclient14 is obsolete in the Debian repositories, there is only
>>>libmysqlclient15.
>>>Don't you have encounter the similar problem?
>>>Please help me. Thanks!
>>>
>>>My linux distribution is Linux 2.6.18-4-686.
>>>
>>>li
>>>
>>>_________________________________________________________________
>>>Gagnez des pc Windows Vista avec Live.comhttp://www.image-addict.fr/
>>>
>>>
>>>_______________________________________________
>>>Users mailing list
>>>Users(a)openser.org
>>>http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>
>_________________________________________________________________
>Ten : Messenger en illimit?sur votre mobile !
>http://mobile.live.fr/messenger/ten/
>
>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
= = = = = = = = = = = = = = = = = = = =
Kerry
sukerry(a)126.com
2007-06-05
