Sorry
Venkatesh
an U me ..... to my mobile
Am Not in hyd , I left My Company,
In the mail list if U see the Klaus mail , he raply and
U can do , if U knew the Avpops modules and pesudo attributes,
http://www.openser.org/dokuwiki/doku.php/tutorials:avpops#serial_forking
see that url , is the serial_forking , Do in the Same in parallel _ forking
other call me , before on 2nd of the May.
On 4/25/07, venkatesh.d <venkatesh.d(a)pyronetworks.com> wrote:
>
> hai raviprakash,
>
> i have tried for that multiple invites behind NAT and
> Mediaproxy and calling from A(a)sipdomain.com to B(a)sipdomain.com and same
> call have to forword to C(a)sipdomain.com . But C(a)sipdomain.com
> invite message going to B system .
> if you feel free can you send your openser.cfg file NATING
> with out using media proxy and with multiple invites
>
>
> Thanks and Regards
> venkatesh.d
>
--
Thanks and Regards
Ravi Prakash Sunkara
ravi.sunkara(a)hyperion-tech.com
M:+91 9985077535
www.hyperion-tech.com
Client and Parent company :- www.august-networks.com
Hi,
Openser version: 1.2.0
We have 4 central Quintum CMS platform hosted in our computer room. We
have several tens of Qintum voice gateway ( DX / AX / Call Relay ) on
remote customer site. Our customer are mainly call centers so they
generate a lot of small calls with an important number of call wich are
never established ( around 50% ). The central platform is quite loaded,
with around 600 simultaneous calls and around 20 new call per second.
Up to now, we used H323 as the signalisation protocol. Now we are
planning to migrate to SIP and use openser 1.2.0 for that.
Does anybody already use openser with Quintum as voice gateway with so
many calls ? I'd like to share experience with people using this kind of
setup with this kind of load.
There are no know problem between openser and Quintum SIP implementation
( we use firmware P104-12-16 ) ?
Openser should be able to route all these call towards our 4 central
gateway with LCR while as well sending radius accounting. Our main and
backup SIP server are IBM X330 ( Bi-Pentium III 1266 Mhz with 2GB of
memory ). Will it be enough to handle 600 simultaneous call and 20 new
calls per seconds ?
For radius accounting, we have 2 radius servers. It seems that when the
first adius server is down, openser is trying 3 times the first radius
server and then go to the second one but the children seems to be
blocked during this time ( for example in debug mode, no more new call
can be establised while radius accounting is not yet finished ). So
should I start lots of children ( 20 or more ) so that if the first
radius is down, openser will still be able to route new calls while some
children are blocked for accounting reason ?
As well I'm planning to use the "dialog" module, if this module largely
increasing the load on openser ?
Regards,
Jerome.
--
Jerome
Hello All!
I have a question. If I declare variable like this:
$var(ip_address) = "192.168.0.1";
I can't use this variable in functions like that one:
revritehostport ($var(ip_address));
It leads me to the following message:
omega1 ~ # /usr/local/sbin/openser -f
/usr/local/etc/openser/openser_registrar.cfg -l 192.168.0.1
0(5723) parse error (316,25-37): syntax error
0(5723) parse error (316,37-38): bad argument, string expected
ERROR: bad config file (2 errors)
So the question is %subj%.
--
With best regards!
Hi Jerome,
Thanks for the quick reply. I had used Openser to send NAT ping to all the registered UAs, but how do you send an OPTIONS message from Openser to the UAs registered in the location table.
Also does the UAs reply as 200OK to the OPTIONS message or is it only one way.
Can you please explain a little more.
Thanks a lot in advance.
w/regards,
Jayesh
----- Original Message ----
From: Jerome Martin <jmartin(a)longphone.fr>
To: Jayesh Nambiar <voip_freak(a)yahoo.co.in>
Cc: openser <users(a)openser.org>
Sent: Friday, 27 April, 2007 6:13:31 PM
Subject: Re: [Users] NAT ping best methods
Hi,
We are working with natted PAP2, and openser is sending keepalive (SIP
OPTIONS). This is working without a glitch, with various types of CPE
NAT routers.
Cheers,
Jerome
Send a FREE SMS to your friend's mobile from Yahoo! Messenger. Get it now at http://in.messenger.yahoo.com/
Hi,
I am using Openser 1.2 and all the UAs that register to it are only PAP2 or SPAs. But all these UAs are on a private network.
I tried using the NAT ping method from Openser to keep the NAT port open, but still sometimes the NAT port gets blocked by some NAT boxes. I tried keeping the interval as 25 seconds.
So then I tried sending Keep Alive Notify messages from the UAs itself towards my Openser, but there I see a strange problem.
The problem is like the device does not send the notify message from the same port which it registered from in the first place. So the port which is stored in the locaion table gets blocked and again the user is not able to receive calls. The user is able to receive calls only after it registers again but then again it is inconsistent.
Has anyone worked with PAP2 and Openser and has got some best method to maintain the NAT ports open so that the user receive calls consistently.
I also wanted to know what is more efficient, the UAs sending keep-alives or Openser sending NAT-ping?
Thanks in advance,
w/regards,
Jayesh
Add online presence to your web pages, find out how here - http://messenger.yahoo.com/addpresence.php
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hello,
I tried to call is_user_in funktion with a variable as group name. I
want to create the group name on the fly, when a INVITE arrives.
if(is_user_in("To", $var(a)))
{
...
}
I got this error message:
0(27274) xl_parse_svname: parsing [$var(a)]
0(27274) xl_lookup_spec_name: found [fu] [18]
0(27274) find_cmd_export_t: found <xlog>(2) in module xlog
[/home/hk/openser//lib/openser/modules/]
0(27274) parse error (479,27-34): syntax error
0(27274) parse error (479,34-35): bad arguments
Is there a way to do dynamic group names für is_user_id?
regards
helmut
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFGMNVj4tZeNddg3dwRApHgAJ4qP30SN9NgH5yzVzx3qDuawQskywCbBfE+
Uum6I3PsxVVrzFa/KvchnmA=
=6hHJ
-----END PGP SIGNATURE-----
Hi all,
I use SERWeb especially for call history. The core of this function is
method.get_acc_entries.php.
For some calls, I see that they are posted two times.
During my investigation I see that the problem come from SQL request in
method.get_acc_entries.
In fact, it seems that when both calling and called party hang out in
the same time, there are two BYE generated in acc table.
Maybe the bug have been already reported, but I don't see nothing about
this. Anyone one have an idea to correct it ?
Thanks for your su