sr-users March 2007

sr-users@lists.kamailio.org

192 participants
380 discussions

[Users] Re: Openser not starting (Knight Tiger)

by vallimamod abdullah

Hello Knight, On 3/24/07, "Knight Tiger" <caugar(a)gmail.com> wrote on behalf of users-request(a)openser.org <users-request(a)openser.org>: > [...] > So the config files are okay but then openser does not start. > [...] Have you had a look on the logs ? There are sometimes config errors that are not detected during the check but only at startup. So you can try with: debug=9 fork=no log_stderror=yes in your config and run openser directly (i.e. not via the init script) to get verbose output to the console. -- Regards, -vma .

17 years, 3 months

[Users] Can not access script variables

by Asterisk Expert

Hello, I've initialized some script variables in request route. I modify the values of some of these SCRIPT VARIABLES -- Regards Asterisk Expert

17 years, 3 months

[Users] Comparable regex function in openser

by CARTWRIGHT, CORY C (ATTSNET)

Hello all, I am attempting to add a line to the SDP of a reply using subst. In perl I can do it like this. $test1 =~ s/(.+)\sRTP\/AVP\s18\s(.+)/$1 RTP\/AVP 18 $2\na=fmtp:18 annexb=no\n/g; This ensures I have the whole "m=audio 28104 RTP/AVP 18 101 19" string in the replacement I started with this: subst('/(.*) RTP\/AVP 18 (.*)/\1 RTP\/AVP 18 \2\r\na=fmtp:18 annexb=no\r\n/g'); As most of you probably can see this does not work. Does anyone know if this is possible? Thanks. This e-mail and any files transmitted with it are the property of AT&T Connecticut, are confidential, and are intended solely for the use of the individuals or entities to whom it is addressed. If you are not a named recipient, or otherwise have reason to believe that you have received this message in error, please notify the sender at phone 203-420-7225, and delete this message immediately from your computer. Any other use, retention, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited.

17 years, 3 months

[Users] OpenSER 1.2 and NAT

by Andreas Granig

Hi, When migrating my config from 1.1 to 1.2, far-end NAT traversal doesn't work anymore. Here is what I do: modparam("usrloc", "nat_bflag", 6) ... # register handling: if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { xlog("L_INFO", "NATed REGISTER\n"); fix_nated_register(); setbflag(6); } if(!save("location")) { # error handling ... } The log message is printed, so NAT is detected. The received-column in the DB also shows the correct NAT-address, but the flag-column is always 0. Any advice? Regards, Andreas This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify us immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person: to do so could be a breach of confidence. Thank you for your cooperation. Information pursuant to paragraph 14 Austrian Companies Code: UPC Austria GmbH; Registered Office: Wolfganggasse 58-60, 1120 Vienna Company Register Number: FN 189858d at the Commercial Court of Vienna

17 years, 3 months

[Users] Openser 1.2.0 and exec_dset

by Tobias Lindgren

Hi all, I'm using exec_dset to run a script which takes the Request-URI and returns a new Request-URI based on the number dialed. In ser.cfg I'm doing this: if (exec_dset("lookup.sh \"$$SIP_RURI\"")) { # Route call } else { # Reply with a cause } Recently a customer started to use SIP-X, and his INVITES with Request-URIs looks like this: sip:1001@192.168.0.1:5060;sipx-noroute=Voicemail Ser responds with "500 Server Internal Error" to these INVITEs, which is due to that my script fails. If I run OpenSER in the foreground with debugging I can see this: 0(20509) exec:w_exec_dset: executing [lookup.php "$SIP_RURI"] 0(20509) exec_str: rtrim sh: line 1: sipx-noroute=Voicemail: command not found How do I correctly escape the SIP_RURI in my openser.cfg to prevent my script from failing? Or is the RURI to long or something? If I run my script from commandline with the request uri, everything is fine. Br, /Tobias

17 years, 3 months

[Users] PRESENCE module issues

by Geir O. Jensen

Setup; OpenSER 1.2.0 Fresh install (no SERWEB, all the rest) running on MySQL 5.0.22 (Ubuntu 6.06) Two subscribers that publish status, but neither can see status of the other... They are both in the presentity table and listed in the watchers/active_watchers table. When I change status in the client the following occurs on the server; PRESENCE:update_presentity: querying presentity PRESENCE:get_subs_dialog:querying database table = active_watchers PRESENCE: get_subs_dialog:The query for subscribtion for [user]= gojensen,[domain]= test-sip.uninett.no for [event]= presence returned no result PRESENCE:query_db_notify: Could not get subs_dialog from database PRESENCE:update_presentity: Could not send Notify PRESENCE: handle_publish: sip-etag: [SIP-ETag: a.1174552555.9851.2^M /31] I looked through the archives and google very quickly and found something about wrong record sizes and types (for postgresql)... However neither seems to apply in my case. Has anyone got PRESENCE module working, or more importantly, does anyone know how to solve the above issue? // sip:gojensen@uninett.no | h323: 004710012 pstn: +47 73 55 79 23 | fax: +47 73 55 79 01

17 years, 3 months

Re: [Users] OpenSER crashes when attempting to use null avp variable

by Daniel-Constantin Mierla

Hello, On 03/23/07 13:59, Asterisk Expert wrote: > Hello Daniel, > I just figured out. I forgot to set db url for avpops :)) > But in this case openser should not start and give error. not? does now, thanks for reporting (just committed on svn). > Instead it started and when executed mysql query, it crashed. > I have one more query. I read that if we set onreply_avp_mode=1 in tm > module, we can access avp variables in reply routes. I have done the > same. I set some avp value in request route and update mysql db based > on that value in reply route but I'm getting null :( > What do you think will be the problem? I will check it. Cheers, Daniel > > > On 3/23/07, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro> > wrote: > > Hello, > > i tried to reproduce, but I got no same result. If the avp is > null, the > returned values is false in comparisons. > > Could you send log messages and backtrace? > > Cheers, > Daniel > > > On 03/23/07 10:37, Asterisk Expert wrote: > > Hello, > > I'm using openser 1.2.0 . I have following section in my > openser.cfg. > > > > avp_db_query("SELECT active, accountcode FROM openser_ip_auth WHERE > > ip_addr='$src_ip'","$avp(s:active);$avp(s:accountcode)"); > > xlog("L_INFO", "\n$avp(s:active):::$avp(s:accountcode)\n"); > > if (!avp_check("$avp(s:active)","eq/1/I")) > > { > > xlog("L_ERR", "$si [$Tf]: $rm $fu -> $ru: REGISTER: bad > > credentials, ask for credentials\n"); > > > > #authentication failed > > www_challenge("", "0"); > > setflag(1); > > return; > > } > > Basically I'm doing IP based authentication. I have used the similar > > method in version 1.1 but openser 1.2.0 crashes if the query in > > avp_db_query returns no rows which keeps those two avp variables > null. > > Is this a bug or I'm doing something wrong? > > I also tried "==" operator for comparison but it crashes whenever it > > is trying to access one of those two variables. > > -- > > Regards > > Ruchir Brahmbhatt > > Ecosmob Technologies > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org <mailto:Users@openser.org> > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > -- > Regards > Ruchir Brahmbhatt

17 years, 3 months

[Users] memory issues

by Christian Schlatter

I'm doing sipp performance measurements with openser 1.2 and I was surprised on how much memory the openser processes do allocate when confronted with a high call-per-second load. I observed the following behavior: One sipp instance creates SIP requests that get routed through openser and forwarded to another sipp instance running in UAS mode. The sipp scenario looks like INVITE ----------> 100 <---------- 180 <---------- 200 <---------- ACK ----------> Pause [ 10.0s] BYE ----------> 200 <---------- Nothing special here. The openser instance record routes the SIP requests and forwards them in transaction stateful mode (t_relay) to the sipp UAS instance. The routing script looks like: route{ if (!method=="REGISTER") record_route(); if (loose_route()) route(1); if (uri==myself) rewritehost("xx.xx.xx.xx"); route(1); } route[1] { if (!t_relay()) sl_reply_error(); exit; } ( xx.xx.xx.xx is the IP of sipp UAS) Running sipp with a call rate of 500 cps results in 45 MB of memory allocation per openser process after a few seconds. What could cause this behavior, message queuing maybe? But then again having a message queue of 40+ MB seems to be unrealistic. And the memory consumption goes up the longer the test runs until openser dies because of out-of-memory. I observed the same behavior with openser 1.1 and 1.2. Is this a memory leak or did I miss some settings? And what's the best method to debug memory issues with openser? thanks in advance, Christian

17 years, 3 months

[Users] No Audio when integrating openSER and Asterisk , in NAT

by raviprakash sunkara

Hello Users openSER is sip proxy and registrar , Asterisk is as PBX, Conference and Voicemail servers, openSER and Asterisk are in the Same N/w Where As the UAC are in Behind the NAT, When Astetrisk is not integrated , UAC are in Behind the NAT is working, openSER is 192.168.2.5 Asterisk is 192.168.2.6 I'm just use rewritehost to asterisk server, UAC ----> openSER - - - -> Asterisk (voicemail sserver ). Please help me -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 www.hyperion-tech.com Client and Parent company :- www.august-networks.com

17 years, 3 months

[Users] OpenSER crashes when attempting to use null avp variable

by Asterisk Expert

Hello, I'm using openser 1.2.0. I have following section in my openser.cfg. avp_db_query("SELECT active, accountcode FROM openser_ip_auth WHERE ip_addr='$src_ip'","$avp(s:active);$avp(s:accountcode)"); xlog("L_INFO", "\n$avp(s:active):::$avp(s:accountcode)\n"); if (!avp_check("$avp(s:active)","eq/1/I")) { xlog("L_ERR", "$si [$Tf]: $rm $fu -> $ru: REGISTER: bad credentials, ask for credentials\n"); #authentication failed www_challenge("", "0"); setflag(1); return; } Basically I'm doing IP based authentication. I have used the similar method in version 1.1 but openser 1.2.0 crashes if the query in avp_db_query returns no rows which keeps those two avp variables null. Is this a bug or I'm doing something wrong? I also tried "==" operator for comparison but it crashes whenever it is trying to access one of those two variables. -- Regards Ruchir Brahmbhatt Ecosmob Technologies

17 years, 3 months

← Newer
1
...
11
12
13
14
15
16
17
...
38
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2007