sr-users December 2007

sr-users@lists.kamailio.org

130 participants
234 discussions

[OpenSER-Users] Meeting at CCC in Berlin, OSMB in Nuremberg

by Henning Westerholt

Hello all, i'll do two presentations about OpenSER at the Chaos Communication Congress [1], December 27th-30th, 2007 in Berlin and the Open Source Meets Business congress [2], January 22th–24th, 2008 in Nuremberg. If some people there are interested in a meeting for discussions around OpenSER and other related (or unrelated..) topics, please drop me a private email. Regards, Henning [1] http://events.ccc.de/congress/2007/Main_Page [2] http://www.heise.de/events/2008/open_source_meets_business/en/

16 years, 3 months

[Serusers] Using SER with Microsoft OCS 2007

by Nolan Garrett

Hello! I am interested in using SER to convert TCP SIP traffic from OCS to UDP SIP traffic that I can use with an external PSTN gateway provider. Has anyone successfully managed this? Basically, the configuration would look like OCS -> Mediation Server -> SER -> External Provider Would the Mediation Server still need an external (non-NAT'd) IP? It seems like it would, unless I use mediaproxy or RTPproxy, which would add an additional layer of complexity. I guess I am looking for some validation that what I am trying to do will work. My next question, which I can't seem to find an answer to, is how I take the TCP SIP traffic from OCS, convert it to UDP SIP, and also authenticate with that external provider. Any ideas on how to use t_relay_to_udp with authentication? Thank you! Nolan

16 years, 3 months

[OpenSER-Users] Some issues with Session-Timer module

by Franz Edler

Hi, I have just made some tests with sst-module (OpenSER v1.3) and I found the following two issues: I case the min-se value of sst-module is higher than the Session-Expires header field of a received INVITE OpenSER rejects the INVITE request with 422 response (that's as expected). But: 1. the Min-SE header field in 422 response (packet 18 in attached trace) does not end with CR/LF so that it is concatenated with the next header field (Server header) syslog prints in this case: ERROR:sst:sst_dialog_terminate_CB: DID 0xb5582d80 failed (canceled). Terminating session. 2. OpenSER in addition continues to forward the already rejected INVITE transaction with "100 Giving a try"(packet 19) and forwards the INVITE to the UAS (packet 20). The next issue I discovered is with the UAC (Xlite): The repeated INVITE (caused by the 422 Response) does not increment the CSeq header field so that it is regarded as same request leading to a "482 Merged request" rejection at the UAS (Eyebeam). I have attached the tcpdump-trace and the according SIP-scenario trace. Any comments appreciated. Regards Franz

16 years, 3 months

[OpenSER-Users] (no subject)

by VoIP Forums www.Go4Calls.com

Hi Friends, How we can authorize Clients with their static IP Address in MySQL subscriber table? We don't want to provide them username or PWS and they also don't need to register. Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

16 years, 3 months

[OpenSER-Users] dialog module: dialog data remain in DB after "dlg_end_dlg"

by Franz Edler

Hi, I just found that after forced end of a dialog (MI command "dlg_end_dlg") the dialog data remain in the database. The dialog list in memory (MI command "dlg_list") is cleared after forced end of a dialog as expected. Shouldn't the dialog data in the DB also be deleted? Regards Franz

16 years, 3 months

Re: [OpenSER-Users] ERROR:avpops:check_avp: value types don't match

by Jayesh Nambiar

Thanks a lot. Its working now. It had to be like: if(avp_check("$avp(i:103)", "eq/i:0/g")) { do certain things } else { do certain things } w/regards, Jayesh ----- Original Message ---- From: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> To: Jayesh Nambiar <voip_freak(a)yahoo.co.in> Cc: openser <users(a)openser.org> Sent: Friday, 28 December, 2007 2:54:17 PM Subject: Re: [OpenSER-Users] ERROR:avpops:check_avp: value types don't match Hi Jayesh, try to use the avp_print() debug function to see what avps you have loaded after the avp_db_query() and check the type. Note you need to use debug=6 . http://www.openser.org/docs/modules/1.3.x/avpops.html#AEN611 regards, bogdan Jayesh Nambiar wrote: > Hi All, > I am using the function avp_db_query to query a table and fetch few > values. The query is as follows: > "select subscriptionid, ip, media_status from domestic where > prefix=$rU", "$avp(i:101), $avp(i:102), $avp(i:103)". > > Now the media_status column is a column with datatype as integer which > will contain either 0 or 1. I need to check the value in this column > so I use the following: > > if(avp_check("$avp(i:103)", "eq/0/i")) { > do certain things; > } else { > do certain things; > }; > > Even when the value at media_status column is 0 it does not get into > that condition, it always executes the else condition and I see the > following in the logs: > ERROR:avpops:check_avp: value types don't match > > Can someone please help me to overcome this error. When I keep the > datatype of media_status column as varchar it works fine, but I dont > want to do that as that column is going to conatin only integer values. > > Thanks in advance. > > w/regards, > Jayesh > > > ------------------------------------------------------------------------ > Forgot the famous last words? Access your message archive online. > Click here. > <http://in.rd.yahoo.com/tagline_webmessenger_4/*http://in.messenger.yahoo.co…> > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > Get the freedom to save as many mails as you wish. To know how, go to http://help.yahoo.com/l/in/yahoo/mail/yahoomail/tools/tools-08.html

16 years, 3 months

[Serusers] establishment call failure

by dimitris(yahoo)

hi, i am experiencing on little problem establishishing calls with my SER. First of all , i am running ser under linux opensuse, (ser version: 0.9.6 ) , i also installed rtpproxy and made the needed changes to my ser.cfg. When i "connetct" 2 different users with my SER locally , using softphone, everything looks fine. Gennerally the registration procedure using MySQL works fine(locally or not). When i am connected locally, a remote user can call me with no problems... The problem is the following, and i would appreciate if you could help me... When i try to call a remote user, the call cannot be established from my side. At the other side, the establishment of the call is ok. The message is the following: No ACK recieved... PS: I am only working now, till the level of the establishment of the calls... When i solve this problem , i will continue to the voice and video transmition, where i will need your help for sure... PS2: In order rtpproxy to run on the same computer with SER, i type rtpproxy with no parameters ?? can you help me with that too ??? Thank you in advance I send you also my ser.cfg

16 years, 3 months

[OpenSER-Users] A Happy New Year

by Bogdan-Andrei Iancu

Hi everybody, I hope you found under the tree something that made you smile and happy, something that made you think about 2007 as a fulfilled year. I and the Voice System team wish you A Happy New Year, a good party and rest over the years and see you in 2008 ;) Best regards, Bogdan

16 years, 3 months

[OpenSER-Users] xlog: color PV moved in xlog module ?

by Iñaki Baz Castillo

Hi, a change in 1.3 is: xlog: color PV moved in xlog module Could somebody explain what does it mean? Thanks a lot. -- Iñaki Baz Castillo

16 years, 3 months

[OpenSER-Users] ERROR:avpops:check_avp: value types don't match

by Jayesh Nambiar

Hi All, I am using the function avp_db_query to query a table and fetch few values. The query is as follows: "select subscriptionid, ip, media_status from domestic where prefix=$rU", "$avp(i:101), $avp(i:102), $avp(i:103)". Now the media_status column is a column with datatype as integer which will contain either 0 or 1. I need to check the value in this column so I use the following: if(avp_check("$avp(i:103)", "eq/0/i")) { do certain things; } else { do certain things; }; Even when the value at media_status column is 0 it does not get into that condition, it always executes the else condition and I see the following in the logs: ERROR:avpops:check_avp: value types don't match Can someone please help me to overcome this error. When I keep the datatype of media_status column as varchar it works fine, but I dont want to do that as that column is going to conatin only integer values. Thanks in advance. w/regards, Jayesh Now you can chat without downloading messenger. Go to http://in.messenger.yahoo.com/webmessengerpromo.php

16 years, 3 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2007