sr-users November 2007

sr-users@lists.kamailio.org

138 participants
249 discussions

[OpenSER-Users] lack of notify, subscribe problem
by Stanisław Pitucha 09 Nov '07

09 Nov '07

Hey I've got 2 issues with pub/sub: 1. Openser does correct subscription on grandstream 2020 phone. But then anything happens: register, invite, whatever from monitored phone, openser doesn't generate any notifications for subscribers. Any pointers on it? Is there some variable, that I should set to enable those? 2. Phone issue. Trying to start subscribe on snom 190 - messages sent are: ----- SUBSCRIBE ... ... Event: dialog Accept: application/dialog-info+xml ----- 202 OK ----- NOTIFY ... Event: dialog;sla Subscription-State: active;expires=3600\r\n ----- 489 Bad Event ----- Anything I can do about it? I've tried it with svn version with the same effect. Couldn't really find anything in docs that I could change in config. pub/sub is handled with simple handle_publish/handle_subscribe - nothing fancy in config - just location storing on register and message passing. Thanks for all info.

2 1

[OpenSER-Users] UAC_REPLACE_FROM function
by Allan Chao ( 趙廷睿 ) 09 Nov '07

09 Nov '07

Dear All: I want to use uac_replace_from function to change from header username, it will be successed in the first time , but when i use in the second time , the from header username become <username1 username2> . but i want it become <username2> , how can i solve it , thanks. allan

2 1

[OpenSER-Users] cdrtool radus openser.cfg configuration
by ayeddjalil 09 Nov '07

09 Nov '07

Hi every one It's my first time there, I am trying to install cdrtool, I installed openser with radius and mysql accounting, I follow the install file with cdrtool, but it seam it's not very clear I added these line in my openser.cfg as they said in the install file 268 loadmodule "acc.so" 269 270 modparam("acc", "failed_transaction_flag", 1) 271 modparam("acc", "report_cancels", 0) 272 modparam("acc", "report_ack", 0) 273 modparam("acc", "early_media", 0) 274 275 modparam("acc", "log_level", 1) 276 modparam("acc", "log_flag", 1) 277 modparam("acc", "log_missed_flag", 1) 278 279 modparam("acc", "radius_config", "/etc/openser/radius/client.conf") 280 modparam("acc", "radius_flag", 1) 281 modparam("acc", "radius_missed_flag", 1) 282 modparam("acc", "radius_extra", "Sip-RPid=$avp(s:rpid); \ 283 Source-IP=$si; \ 284 Source-Port=$sp; \ 285 Canonical-URI=$avp(can_uri); \ 286 Billing-Party=$avp(billing_party); \ 287 Divert-Reason=$avp(s:divert_reason); \ 288 X-RTP-Stat=$avp(s:rtp_statistics); \ 289 From-Header=$hdr(from); \ 290 User-Agent=$hdr(user-agent); \ 291 Contact=$hdr(contact); \ 292 Event=$hdr(event); \ 293 SIP-Proxy-IP=$avp(s:sip_proxy_ip)") alone opense do not start intill I added this loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" modparam("acc", "service_type", 15) modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") the next problem is when adding setflag(ACCOUNTING_FLAG); avp_write("SER_IP","$avp(s:sip-proxy)"); avp_write("$ru", "$avp(can_uri)"); errors comes, here what I get from the command /sbin/openser -c 0(22857) parse error (123,9-24): syntax error 0(22857) parse error (123,9-24): missing '(' or ')'? 0(22857) parse error (123,9-24): bad command: missing ';'? 0(22857) parse error (123,24-25): bad command!) 0(22857) parse error (124,24-25): unknown command, missing loadmodule? 0(22857) parse error (125,25-26): unknown command, missing loadmodule? ERROR: bad config file (6 errors) 0(22857) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not allocated -> nothing to destroy is thier any one has a sample of openser.cfg file for cdrtool Please help -- View this message in context: http://www.nabble.com/cdrtool-radus-openser.cfg-configuration-tf4776366.htm… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

Re: [Serusers] Spam Re: Voicemail setup on SER v0.9.6
by roayu 09 Nov '07

09 Nov '07

Hi Mashudi, Thanks for your reply. From the documentation, it seems that I need to install both SER and SEMS under the same directory. 1) I've already installed the SER under /usr/src, can I also install SEMS under /usr/src instead of /usr/local/src ? 2) By the way, I would like to know that does this voicemail able to trigger the voicemail on the IP hard phone? For instance, if there's a new voicemail, can the IP hard phone got the signal of the new voicemail? Thanks. Regards, Roa Yu -----Original Message----- From: mashudi [mailto:mashudiflexi@telkom.co.id] Sent: Saturday, November 10, 2007 2:04 AM To: roayu Subject: Spam Re: [Serusers] Voicemail setup on SER v0.9.6 dear roayu, you can read on http://www.iptel.org/sems/sems_application_development_tutorial just follow the document, you will able run simple voice mail. roayu wrote: > ********************** > Your mail has been scanned by > Telkom Anti Virus System > *********************** > > Hi there! > > > > Could anyone let me know how to setup Voicemail on SER v.0.9.6 ? Do I > need to install SEMS as well? > > > > Thanks > > > > > > Regards, > > Roa Yu > > ------------------------------------------------------------------------ > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] Voicemail setup on SER v0.9.6
by roayu 09 Nov '07

09 Nov '07

Hi there! Could anyone let me know how to setup Voicemail on SER v.0.9.6 ? Do I need to install SEMS as well? Thanks Regards, Roa Yu

1 0

[OpenSER-Users] Forking Madness
by Chris Heiser 09 Nov '07

09 Nov '07

So I've been all over the place looking at various examples, threads, issues, and solutions to all sorts of forking scenarios. What I haven't been able to find is a solution to my odd corner case. Let me explain the forking scenario: Call comes in for user A: - Use avp_db_load to find that user A wants to parallel fork to 123 and 456 - Call to 123 fails because there's no registration - Call to 456 times out == At this point we serial fork to the next step which might hbe - Just call my cell What's unclear to me is how to actually achieve this logic. I mean, getting the initial parallel fork is quite simple using avp_pushto. What's unclear is how to setup the failure route to know that you can ignore a failure in any of the forks until the last fork as failed, and then it's time to move on. Something like, "are there other branches pending?" would be a nice check to determine if the failure route should just drop or if it should append a branch (or two) for the next serial fork. Comments? Ideas? Thoughts? Am I totally insane? Should I be using a specific module for this? --Chris Heiser

4 9

[OpenSER-Users] openser + cdrtool and multiple cdrs
by Morten Isaksen 08 Nov '07

08 Nov '07

Hi! I few times a day I have 2 cdrs for one call but with reverse direction. I have looked at the radius server detail records and as far as I can see this happens: A Acct-Status-Type = Start with Acct-Session-Id = X1 and Sip-To-Tag = X2 and Sip-From-Tag = X3 is logged. I few seconds later Acct-Status-Type = Start with Acct-Session-Id = X1 and Sip-To-Tag = X3 and Sip-From-Tag = X2 is logged. (To and From tag is reversed) When the call is over a Update and a Stop is logged. The Acct-Status-Type is not a unique key in the raddact table and there for I get a CDR for each direction. My theory is that this happens when the server recieves a re-INVITE. Can I prevent this in openser.cfg? Is it safe to add Acct-Session-Id as a unique key to the raddact table? Or is the Session id not globaly unique? -- Morten Isaksen http://www.misak.dk/blog/

1 0

Re: [OpenSER-Users] Storing SIP Response Codes with avpops?
by Douglas Garstang 08 Nov '07

08 Nov '07

Thanks, but when I try that, I get the following error from openser: Nov 7 23:17:32 localhost openser[7035]: ERROR:xl_parse_spec: bad pvar name "rr{s.escape.common})') " Nov 7 23:17:32 localhost openser[7035]: ERROR:avpops:fixup_db_query_avp: wrong format[insert into sip_responses (response_code, response_reason) values ('$rs', '$(rr{s.escape.common})') ] Nov 7 23:17:32 localhost openser[7035]: ERROR: fix_actions: fixing failed (code=-1) at cfg line 139 OpenSER also complains that i need to specify an avp table, but since I am specifying the table in the query, I don't understand why that's required. Douglas. ----- Original Message ---- From: Daniel-Constantin Mierla <daniel(a)voice-system.ro> To: Douglas Garstang <dougmig33(a)yahoo.com> Cc: users(a)lists.openser.org Sent: Thursday, November 8, 2007 11:57:35 AM Subject: Re: [OpenSER-Users] Storing SIP Response Codes with avpops? Hello, On 11/08/07 21:40, Douglas Garstang wrote: > All, > > I'd like to store SIP response codes in mysql using avpops. Is this > possible? > > I tried to do this a few years ago and couldn't find any > documentation. Unfortunately, I still can't find any. > > Can someone post an example? All I can find online is reference > documentation for avpops. > > I'd really like to see a full example with the modparams defining the > table structure, and how I would use avp_write and avp_db_store to > write the $rr response code. the easiest way is to use avp_db_query(), you can give as parameter any sql query. In your case, you can use in onreply_route: avp_db_query("insert into sip_responses (response_code, response_reason) values ('$rs', '$(rr{s.escape.common})') "); You need to create the table sip_responses, with the two string columns. Daniel > > Thanks. > Douglas. > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[OpenSER-Users] Storing SIP Response Codes with avpops?
by Douglas Garstang 08 Nov '07

08 Nov '07

All, I'd like to store SIP response codes in mysql using avpops. Is this possible? I tried to do this a few years ago and couldn't find any documentation. Unfortunately, I still can't find any. Can someone post an example? All I can find online is reference documentation for avpops. I'd really like to see a full example with the modparams defining the table structure, and how I would use avp_write and avp_db_store to write the $rr response code. Thanks. Douglas. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Re: [OpenSER-Users] OpenSER SIP registrar - third party registration
by Klaus Darilion 08 Nov '07

08 Nov '07

Pascal Maugeri wrote: > Thanks for your prompt answer. > > On 10/19/07, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote: >> It depends on what kind of information should be stored in the other >> server. If you "your server" needs to see the same contact information >> as openser received you could use t_replicate to replicate the REGISTER >> to "your server". In this case "your server" must not challenge the >> REGISTER. > > My server does not need to store any information but the information > that a user has been registered. > > I believe the solution I need is to use this t_replicate but I need to > replicate the register once the registration is achieved successfully. > So how can I do this replicate to my server once the complete dialog > REGISTER-401-REGISTER-OK has been achieved between the UAC and OpenSER > ? Just use t_replicate after save(), e.g: http://lists.iptel.org/pipermail/serdev/2006-June/007518.html regards klaus ps: please Cc: the mailing-list

3 2

← Newer
1
...
17
18
19
20
21
22
23
24
25
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2007