sr-users November 2007

sr-users@lists.kamailio.org

138 participants
248 discussions

[Serusers] ser-0.9.6: modules/postgres bugreport & patch
by Alexandre Snarskii 13 Oct '08

13 Oct '08

Hi! I'm running ser-0.9.6, on FreeBSD 6.1-stable, database backend is postgresql version 8.1.3. Today I got errors in logfiles, saying: messages.2.bz2:May 29 14:35:03 <XXX> /usr/local/sbin/ser[51448]: ERROR:avpops:dbrow2avp: dbrow contains NULL fields The similar problem reported in: http://lists.iptel.org/pipermail/serusers/2005-May/019681.html with much more detailed description of error, database contents and config samples. Patch is trivial, and looks more like a fix to copy'n'paste error: in mysql/val.c function str2val states: if (!_s) { memset(_v, 0, sizeof(db_val_t)); VAL_TYPE(_v) = _t; VAL_NULL(_v) = 1; return 0; } VAL_NULL(_v) = 0; and the last line mentions that 'well, that's value is not NULL'. In postgresql/db_val.c, line 182, function str2valp, the same statement is the: if (!_s) { DLOG("str2valp", "got a null value"); VAL_TYPE(_v) = _t; VAL_NULL(_v) = 1; return 0; } without explicit notification that this is not-NULL value. More than, nowhere else in this function VAL_NULL(_v) not set to 0. So, if a value _v.val contained anyting but 0 at the function start, resulting value will be threated as NULL despite the fact, that _s is NOT NULL. Patch is obvious, just add VAL_NULL(_v)=0; after cited block (line 188) and everyting will be ok. At least for me it's ok for some hours :)

2 3

[Serusers] SER Nokia CANCEL Problem
by Abdul Qadir 07 May '08

07 May '08

Hi , I tried to call from one nokia sip (E61 and other models )phone to another nokia sip phone. The call works fine. The problem comes only when I call from Phone A to Phone B and then immediately cancel the call(from Phone A). The Phone A will hangup the call as it sent CANCEL but the SER will ignore this CANCEL and still send INVITE to Phone B resulting in a ghost call situation. I tried to capture a log of message and found that Phone A "CANCEL" message is received on SER even before any provisional response from Phone B. Therefor SER doesnot relay this CANCEL request to Phone B. I even checked RFC which clearly says that UAC should not send CANCEL untill it receives any provisional response. I talked to Nokia expert and they said the 100 Trying message from your server is considered as provisional response, therefor behaviour of client is absolutely correct. Is there any way I can stop 100 Trying message and still run statefull SER, so that I can verify what nokia said. Any ideas suggestions are welcome. Thanking you all in advance. Best Regards, Abdul Qadir --------------------------------- Don't be flakey. Get Yahoo! Mail for Mobile and always stay connected to friends.

10 36

[OpenSER-Users] strange error logs in syslog
by Cseke Tamas 14 Jan '08

14 Jan '08

Hello, We have a lots of error log like this, what fills syslog ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction ERROR:tm:w_t_relay: t_forward_nonack failed ERROR: t_check_status: cannot check status for a reply which has no T-state established Could you tell me how could i avoid this? I think these are not errors. Shall i just change the debug level for this logs? Thanks any help, Tamas

2 2

[Serusers] SER 2_0_0 ERROR: slow timer too slow
by tzieleniewski 10 Jan '08

10 Jan '08

Hi, I encountered the following error: Jun 15 08:57:21 rd ser[12680]: ERROR: slow timer too slow: overflow (7997 - 6974 = 1023) Jun 15 08:57:24 rd last message repeated 46 times Could you please point me what could be the reason? Thanks in advance. Tomasz

2 1

[OpenSER-Users] Openser + Mediaproxy behind NAT
by Halomoan Chow 08 Jan '08

08 Jan '08

Hi Is it possible to put Openser + Mediaproxy behind NAT while serving internal phones and external phones ? Internal phone <-> Openser+MediaProxy <-> NAT <-> external phone (maybe behind nat also) Openser is act as a registrar in this case. If you have successful story with this setting, please share. Thank you so much Regards, Halomoan

2 2

Re: [OpenSER-Users] OpenXcap exception: TypeError in twisted.web2.stream.IByteStream
by Antoine Fressancourt 18 Dec '07

18 Dec '07

Hello, I have the same error as Gregorio on my installation, I am running OpenSER 1.3 and my XCAP client is eyeBeam². Thanks in advance for your help, Antoine 2007/10/30, Gregorio <goyo.villalba(a)dialcom.com>: > > Hi all. > > > > I get an exception in openXcap when I send a GET to retrieve the resources > file. > > I explain the process I followed: > > > > ----->Send GET to openXcap. > > <----Receive 404, because there is not file. > > > > -----> Send PUT to openXcap. The body contains a resource-list.xmldocument 'with no data': > > Body; > > <?xml version='1.0' encoding='UTF-8'?> > > <resource-lists xmlns='urn:ietf:params:xml:ns:resource-lists' > xmlns:cp='urn:ietf:params:xml:ns:copycontrol'> > > <list></list> > > </resource-lists> > > > > <----Receive 200 OK. So openXcap likes my document. > > > > -----> Send GET to openXcap. > > <---- Receive 500 "An error occurred rendering the requested page. More > information is available in the server log". So the same document that was > accepted in the PUT throws an exception. > > > > The server log says: > > > > Oct 30 15:01:55 localhost openxcap[2791]: [-] Exception rendering: > > Oct 30 15:01:55 localhost openxcap[2791]: [-] Traceback (most recent call > last): > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/posixbase.py", line 228, > in mainLoop > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.runUntilCurrent > () > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/base.py", line 533, in > runUntilCurrent > > Oct 30 15:01:55 localhost openxcap[2791]: [-] f(*a, **kw) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 239, in > callback > > Oct 30 15:01:55 localhost openxcap[2791]: [-] > self._startRunCallbacks(result) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 304, in > _startRunCallbacks > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self._runCallbacks() > > Oct 30 15:01:55 localhost openxcap[2791]: [-] --- <exception caught > here> --- > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/internet/defer.py", line 317, in > _runCallbacks > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.result = > callback(self.result, *args, **kw) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/xcap/resource.py", line 51, in > sendResponse > > Oct 30 15:01:55 localhost openxcap[2791]: [-] response = > http.Response(response.code, stream=response.data) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] File > "/usr/lib/python2.4/site-packages/twisted/web2/http.py", line 109, in > __init__ > > Oct 30 15:01:55 localhost openxcap[2791]: [-] self.stream = > IByteStream(stream) > > Oct 30 15:01:55 localhost openxcap[2791]: [-] exceptions.TypeError: > ('Could not adapt', array('c', "<?xml version='1.0' > encoding='UTF-8'?><resource-lists > xmlns='urn:ietf:params:xml:ns:resource-lists' > xmlns:cp='urn:ietf:params:xml:ns:copycontrol'><list></list></resource-lists>"), > <InterfaceClass twisted.web2.stream.IByteStream>) > > > > > > Anyone know what is wrong? > > Thanks and best regards. > > Gregorio > > > > > > > > > > > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

2 1

[OpenSER-Users] Question about avp_aliases and script_flags
by Helmut Kuper 12 Dec '07

12 Dec '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, avpops doc say that avp spec for integer values is $avp(i[script_flags]:<ID>) Is it possible to set avp aliases to that values, e.g. avp_aliases="x=i1:10" avp_aliases="y=i2:10" ? When I do that, I got this error message in openser 1.3: Nov 14 16:00:42 [28355] ERROR:core:add_avp_galias: duplicate alias/avp entry Nov 14 16:00:42 [28355] ERROR:core:add_avp_galias_str: add global alias failed Nov 14 16:00:42 [28355] CRITICAL:core:yyerror: parse error (54,3-4): invalid AVP aliases regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHOxLU4tZeNddg3dwRArlWAKCd7mGq6K3yODf/8bvZRa9F/vcpugCfWsb7 Ale6eO7Xz8C0fnvyg5m4/n0= =tPWq -----END PGP SIGNATURE-----

2 9

[OpenSER-Users] openxcap Problem
by Schumann Sebastian 10 Dec '07

10 Dec '07

Dear all I have a big problem with openxcap. I don't get it work :( As I saw on their webpage, this mailing list can be posted for this concern as well. I am using version 0.9.3 and acc. the installation file on http://www.openxcap.org all current dependencies from the Debian unstable distribution. When I start /usr/bin/openxcap, the following error occurs in the syslog: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema As I wrote, I followed all instructions from the openxcap webpage but didn't find any hints how to make it work. Any help on that would be appreciated. Best regards Sebastian -- Sebastian Schumann Diploma Student Architecture and Design Department Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Address: Namestie Slobody 6, 817 62 Bratislava, Slovakia Office: Room 449, Jarabinkova 1, 821 09 Bratislava, Slovakia +421 2 588 13332 (tel) +421 910 643010 (mobile) +49 175 1925928 (mobile) sebastian.schumann(a)t-com.sk http://www.t-com.sk <http://www.t-com.sk/>

4 3

[OpenSER-Users] uac_restore_from problem
by Zoltán Kovács 05 Dec '07

05 Dec '07

Dear Colleagues, first of all, thank you for the great software which is a very nice and convenient way to build up a stable VoIP telephone system! We already have a working system based on OpenSER and Asterisk. After many experiments I finally raise this question to you because I cannot figure out the solution. The problem described on http://www.openser.org/pipermail/users/2006-January/002747.html seems to be very similar to mine. I am using openser-1.1.0-9etch1. I tried to replace the FROM variable as follows: loadmodule "uac.so" modparam("uac","from_restore_mode","auto") ... route { ... avp_write("$fU", "$avp(s:display)"); avp_write("$fU", "$avp(s:dispuri)"); avp_subst("$avp(s:display)", "/^36(.*)/06\1/"); avp_subst("$avp(s:dispuri)", "/^36(.*)/sip:06\1@datanet.hu/"); uac_replace_from("$avp(s:display)", "$avp(s:dispuri)"); ... } Unfortunately nothing seems to happen: no change is made on several VoIP telephones, including X-Lite as well. loose_route() and record_route() were also used in my configuration. Could you please help me what I am missing here? If needed, I can also send a full config file. Thank you in advance, Zoltan Kovacs sysadmin

2 4

[Serusers] tm module problem
by Szasz Szabolcs 05 Dec '07

05 Dec '07

Hi I have a problem with tm module, I can't set the module parameter pass_provisional_replies . The module tm is loaded succesfully, I insert in to the configuration this line: modparam("tm", "pass_provisional_replies", 1) When I start ser I got this error message : 0(9618) set_mod_param_regex: parameter <pass_provisional_replies> not found in module <tm> 0(9618) parse error (33,19-20): Can't set module parameter ser version used 0.9.6 , I couldn't found any solution on the google. I have to recompile the tm module with some modifications ? or I have other mistake in the configuration? Please help! Thank you Szasz Szabolcs

4 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2007