sr-users October 2007

sr-users@lists.kamailio.org

130 participants
285 discussions

[OpenSER-Users] Problem with OpenXCAP, Please Help
by Kirti Dhingra 26 Oct '07

26 Oct '07

Hi, I am having problems using OpenXCAP and somehow need to make it work. I set it up on a RHEL 4 machine, and followed all the steps listed on the openxcap installation page. Now when I run the openxcap process, It shows that the process has started and the twisted framework is listening on port 8000, but whenever I add a contact on Eyebeam where remote storage is enabled to XCAP, I get a message that Eyebeam could not add the contact due to failed authentication. I have enabled Use SIP credentials in the storage settings on XCAP. My XCAP Root URi in the config file for OpenXCAP is http://10.203.144.172/xcap-root/ while in Eyebeam it is http://10.203.144.172:8000/xcap-root/. There are no traces shown in syslog for OpenXCAP when it receives a message. Is there anyway to get detailed traces for openXCAP. Also it may be possible that Eyebeam supports only https, but I do not wish to use https. Any help would be greatly appreciated. Thanks & Regards, Kirti Dhingra *********************** Aricent-Unclassified *********************** "DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of the individual to whom it is addressed. It may contain privileged or confidential information and should not be circulated or used for any purpose other than for what it is intended. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for loss or damage arising from the use of the information transmitted by this email including damage from virus."

1 0

[OpenSER-Users] openser.org site migration
by Daniel-Constantin Mierla 25 Oct '07

25 Oct '07

Hello, in the following days will start the migration of openser.org site to a new server. That might bring some outages of the web site and mailing list -- I hope won't happen, but in case will do, please wait for a while and try again. SVN and the rest hosted on sourceforge won't be affected. This is a preliminary notification to propagate the info better, beginning and ending of the transition will be marked on the mailing list and web site. Cheers, Daniel

1 1

Re: [OpenSER-Users] Sinatx error in config file in line 1 !!!!!
by Ovidiu Sas 25 Oct '07

25 Oct '07

Do you have a " character on your first line? Or is just your posting format? Also, start openser with debug=9 and check the log output. Regards, Ovidiu Sas On 10/25/07, Gregorio <goyo.villalba(a)dialcom.com> wrote: > > > > > Hi all. > > > > I am installing svn HEAD version of openSer (at 10:24 am). I am finding > strange errors. > > As I wrote before I could not create the data base (mysql) with the command > create and the log was quite weird. > > Now, when I try to start openser I get this in the log: > > > > 'Oct 25 16:53:47 localhost openser: core:main: initialize the pseudo random > generator from /dev/urandom > > Oct 25 16:53:47 localhost openser: core:yyerror: parse error (1,1-2): syntax > error > > Oct 25 16:53:48 localhost openser: core:main: bad config file (1 errors)' > > > > 'openser.cfg' is in /usr/local/etc/openser/openser.cfg and > I don't find anything wrong with it, apparently the line 1 is not wrong. > > > > Can somebody tell me what is wrong? > > Thanks in advance. > > Gregorio. > > > > Here is the file content: > > > > " > > # > > # $Id: openser.cfg 2825 2007-09-27 09:05:52Z henningw $ > > # > > # simple quick-start config script > > # Please refer to the Core CookBook at > http://www.openser.org/dokuwiki/doku.php > > # for a explanation of possible statements, functions and parameters. > > # > > > > # ----------- global configuration parameters ------------------------ > > > > debug=3 # debug level (cmd line: -dddddddddd) > > fork=yes > > log_stderror=no # (cmd line: -E) > > children=4 > > > > port=5060 > > > > # Uncomment these lines to enter debugging mode > > #fork=no > > #log_stderror=yes > > > > # Uncomment this to prevent the blacklisting of temporary not available > destinations > > #disable_dns_blacklist=yes > > > > # # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures > > #dns_try_ipv6=no > > > > # uncomment the following lines for TLS support > > #disable_tls = 0 > > #listen = tls:your_IP:5061 > > #tls_verify_server = 1 > > #tls_verify_client = 1 > > #tls_require_client_certificate = 0 > > #tls_method = TLSv1 > > #tls_certificate = > "/usr/local/etc/openser/tls/user/user-cert.pem" > > #tls_private_key = > "/usr/local/etc/openser/tls/user/user-privkey.pem" > > #tls_ca_list = > "/usr/local/etc/openser/tls/user/user-calist.pem" > > > > # ------------------ module loading > ---------------------------------- > > > > #set module path > > mpath="/usr/local/lib/openser/modules/" > > > > # Uncomment this if you want to use SQL database > > #loadmodule "mysql.so" > > > > loadmodule "sl.so" > > loadmodule "tm.so" > > loadmodule "rr.so" > > loadmodule "maxfwd.so" > > … > > … > > … > > …" > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[OpenSER-Users] Sinatx error in config file in line 1 !!!!!
by Gregorio 25 Oct '07

25 Oct '07

Hi all. I am installing svn HEAD version of openSer (at 10:24 am). I am finding strange errors. As I wrote before I could not create the data base (mysql) with the command create and the log was quite weird. Now, when I try to start openser I get this in the log: 'Oct 25 16:53:47 localhost openser: core:main: initialize the pseudo random generator from /dev/urandom Oct 25 16:53:47 localhost openser: core:yyerror: parse error (1,1-2): syntax error Oct 25 16:53:48 localhost openser: core:main: bad config file (1 errors)' 'openser.cfg' is in /usr/local/etc/openser/openser.cfg and I don't find anything wrong with it, apparently the line 1 is not wrong. Can somebody tell me what is wrong? Thanks in advance. Gregorio. Here is the file content: " # # $Id: openser.cfg 2825 2007-09-27 09:05:52Z henningw $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 port=5060 # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # Uncomment this to prevent the blacklisting of temporary not available destinations #disable_dns_blacklist=yes # # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures #dns_try_ipv6=no # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" . . . ."

1 0

[OpenSER-Users] openser 1.3 HEAD and radius_extra parameter
by Helmut Kuper 25 Oct '07

25 Oct '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi I updated today to openser 1.3 (HEAD) and got a problem with radius_extra parameter of acc module. openser config line is: modparam("acc", "radius_extra", "Sip-Src-IP=$si; Sip-Src-Port=$sp; Sip-User-ID=$fU; Sip-User-Realm=$fd; Sip-Req-URI=$ru") console log delivered: Oct 25 13:49:11 [23936] ERROR:acc:parse_acc_extra: parse failed in <Sip-Src-IP=$si; Sip-Src-Port=$sp; Sip-User-ID=$fU; Sip-User-Realm=$fd; Sip-Req-URI=$ru> around position 88 any ideas what the reason could be? openser 1.2 works fine with same config. regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHIIUc4tZeNddg3dwRAj4RAJ98aOYYDsWA5pFPfc7yhoQ/Gswt/gCeI2ZG 317jg0jKh0cUWvfc5F0VVkU= =SG4V -----END PGP SIGNATURE-----

2 1

[OpenSER-Users] record_route_preset with dynamic external IP address
by Richard Bennett 25 Oct '07

25 Oct '07

Hi, In this scenario: User agents: UA1-192.168.1.1 UA2-192.168.1.2 UA3-192.168.1.3 All register with internal proxy: Openser-192.168.1.20 -> Nat-1.2.3.4 -> Termination server. Openser contacts the terminating server using the UAC module. On the internal Openser I record-route all calls to make sure the whole dialog passes over the proxy to be able to do accounting. However if I do: record_route_preset("1.2.3.4:5060"); and 1.2.3.4 is a dynamic IP address it seems it will be tricky to keep the record route updated. Is the answer that I need not be doing a record-route at all, as all packets will pass over the proxy anyway due to the UAC module, or is there some way to use records-route-preset with dynamic ip addresses? Thanks, Richard

2 1

[OpenSER-Users] Problem in stopping wesip
by Saurabh Agarwal 25 Oct '07

25 Oct '07

Hi All, I am having problems in stopping the wesip server , I am not able restart it again and it also gives problem when i try to stop it : Log Message while trying to start ./startup.sh Starting WESIP Application Server VozTelecom... [root@localhost bin]# HttpConnector [main] - The [all:7080] has been created Exception during startup processing java.lang.reflect.InvocationTargetException at java.lang.reflect.Method.invoke(libgcj.so.7rh) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156) Caused by: java.lang.NoClassDefFoundError: java.util.concurrent.ConcurrentHashMap at com.voztele.sipservlet.connector.SipConnector.start(SipConnector.java :202) at org.apache.catalina.core.StandardService.start(StandardService.java :454) at org.apache.catalina.core.StandardServer.start(StandardServer.java :2144) at org.apache.catalina.startup.Catalina.start(Catalina.java:471) at org.apache.catalina.startup.Catalina.execute(Catalina.java:358) at org.apache.catalina.startup.Catalina.process(Catalina.java:129) at java.lang.reflect.Method.invoke(libgcj.so.7rh) ...1 more Starting WESIP Application Server VozTelecom... [root@localhost bin]# HttpConnector [main] - The [all:7080] has been created Exception during startup processing java.lang.reflect.InvocationTargetException at java.lang.reflect.Method.invoke(libgcj.so.7rh) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156) Caused by: java.lang.NoClassDefFoundError: java.util.concurrent.ConcurrentHashMap at com.voztele.sipservlet.connector.SipConnector.start(SipConnector.java :202) at org.apache.catalina.core.StandardService.start(StandardService.java :454) at org.apache.catalina.core.StandardServer.start(StandardServer.java :2144) at org.apache.catalina.startup.Catalina.start(Catalina.java:471) at org.apache.catalina.startup.Catalina.execute(Catalina.java:358) at org.apache.catalina.startup.Catalina.process(Catalina.java:129) at java.lang.reflect.Method.invoke(libgcj.so.7rh) ...1 more Error log while stopping : [root@localhost bin]# ./shutdown.sh Stoping WESIP Application Server VozTelecom... [root@localhost bin]# Catalina.stop: java.net.ConnectException: Connection refused java.net.ConnectException: Connection refused at gnu.java.net.PlainSocketImpl.connect(libgcj.so.7rh) at java.net.Socket.connect(libgcj.so.7rh) at java.net.Socket.connect(libgcj.so.7rh) at java.net.Socket.<init>(libgcj.so.7rh) at java.net.Socket.<init>(libgcj.so.7rh) at org.apache.catalina.startup.Catalina.stop(Catalina.java:540) at org.apache.catalina.startup.Catalina.execute(Catalina.java:360) at org.apache.catalina.startup.Catalina.process(Catalina.java:129) at java.lang.reflect.Method.invoke(libgcj.so.7rh) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:156) Please Help -- Thanks Saurabh Agarwal

1 0

[OpenSER-Users] openser 1.3 HEAD: xlog
by Helmut Kuper 25 Oct '07

25 Oct '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I got a further problem with openser 1.3 update. Config line is (got it from README file in xlog module dir): xdbg("time $Cbx[$Tf]$Cxx method <$rm> r-uri <$ru>\n"); Console output is: Oct 25 14:13:48 [24777] ERROR:core:pv_parse_spec: error searching pvar "Cbx" Oct 25 14:13:48 [24777] ERROR:core:pv_parse_spec: wrong char [x/120] in [$Cbx[$Tf]$Cxx method <$rm> r-uri <$ru> ] at [3 (0)] Oct 25 14:13:48 [24777] ERROR:xlog:xdbg_fixup: ERROR: wrong format[time $Cbx[$Tf]$Cxx method <$rm> r-uri <$ru> ] Oct 25 14:13:48 [24777] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 1486 Oct 25 14:13:48 [24777] ERROR:core:main: failed to fix configuration with err code -1 again: openser 1.2 works with it. regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHIIjK4tZeNddg3dwRAm5WAKCrmtisBUTpGg3OiCg/+Tp+CFiUpgCggb/a bu3YGYctF8GaeooWncLK1IA= =iwD6 -----END PGP SIGNATURE-----

2 1

[OpenSER-Users] Error creating MySql database
by Gregorio 25 Oct '07

25 Oct '07

Hi. I am trying to install HEAD svn version of OpenSer. After 'make install' including some modules , I tried to create the Data Base with '/usr/local/sbin/openserdbctl create' But this is not working, that is the log: : command not foundser/openserctl/openserdbctl.mysql: line 33: 'usr/local/lib/openser/openserctl/openserdbctl.mysql: line 57: syntax error near unexpected token ` 'usr/local/lib/openser/openserctl/openserdbctl.mysql: line 57: `prompt_pw() /usr/local/sbin/openserdbctl: line 239: openser_create: command not found I have read the script and I don't see anything wrong, It is strange because I tried with former versions of OpenSer and I had no problem. Anybody can help me? Thanks.

1 0

[OpenSER-Users] bye from gateway going to local address
by Richard Bennett 25 Oct '07

25 Oct '07

Hi, I have Openser 1.1 with Mediaproxy terminating calls to a AS5350 Cisco gateway. Everything works fine, except when the PSTN party terminates the call. The cisco gateway then sends a bye message to the user-agents internal IP address instead of to the sip proxy's ip address. Here's an ngrep: 1.2.3.204=cisco gateway 1.2.3.201=openser proxy 62.1.2.122=useragent external ip 192.168.1.10 = useragent internal ip U 1.2.3.201:5060 -> 192.168.1.10:5060 BYE sip:test@62.1.2.122:5060 SIP/2.0. Record-Route: <sip:1.2.3.201;lr=on;ftag=E6EFE450-D54>. Via: SIP/2.0/UDP 1.2.3.201;branch=z9hG4bKebda.e0002794.0. Via: SIP/2.0/UDP 1.2.3.204:5060;branch=z9hG4bKCC881474. From: <sip:04766343@192.168.1.10>;tag=E6EFE450-D54. To: "3227842234" <sip:101002936@sip.server.com>;tag=6b26b6926603729o0. Date: Tue, 23 Oct 2007 20:36:05 GMT. Call-ID: 656e89a4-6b2eb629(a)192.168.1.24. User-Agent: Cisco-SIPGateway/IOS-12.x. Max-Forwards: 69. Route: <sip:192.168.1.10;lr=on;ftag=6b26b6926603729o0;vsf=AAAAAEVVQkRwAwABGHFFUV5SAFpCaWVuc2ludmVzdG1lbnQuY29t>. Timestamp: 1193171774. CSeq: 101 BYE. Reason: Q.850;cause=16. Content-Length: 0. So it looks to me like the Cisco is simply ignoring the record-route header. Is this a config error in the cisco, or in Openser? Pertinent bits of the openser config are: # Record Route Section if (method=="INVITE" && client_nat_test("3")) { record_route_preset("1.2.3.201:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # Call Tear Down Section if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # Loose Route Section if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); }; if (client_nat_test("3")||search("^Route:.*;nat=yes")){ setflag(6); use_media_proxy(); }; }; route(1); exit; }; # Call Type Processing Section if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(4); route(1); } else { sl_send_reply("403", "Forbidden"); }; exit; }; if (method=="ACK") { route(1); exit; } else if (method=="CANCEL") { route(1); exit; } else if (method=="INVITE") { route(3); exit; } else if (method=="REGISTER") { route(2); exit; }; route[1] { # Default Message Handler t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # REGISTER Message Handler # snipped } route[3] { # INVITE Message Handler if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); exit; }; route(4); route(5); exit; }; route[4] { # NAT Traversal Section if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } route[5] { # PSTN Handler Cisco rewritehost("1.2.3.204"); route(1); } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } Thanks for any help, Richard

4 5

← Newer
1
...
5
6
7
8
9
10
11
...
29
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2007