sr-users August 2006

sr-users@lists.kamailio.org

184 participants
360 discussions

by ram

Hi all What is the best OS to install SER on. and its very stable for Prepaid and Post paid Iam trying to install on FC5 or RHEL 4.0 Expert coments will be apprciated Ram

18 years, 1 month

Re: [Users] Can not register to OPENSER

by Kristian Kielhofner

Bill Zhang wrote: > Bogdan, > > Thanks for the reminder, this is a question that I don't know the answer, as > I'm struggling to understand the whole configuration. I will try to find > out why it is called:). > > BTW, I always want to see if I can make SER a powerful server with following > configuration: > > 1. Check if SIP end point(base on the SIP message, like Register, Invite) > is behind the NAT, if it is with private IP, then use SER NAThelper for SIP > Message and RTP Proxy for RTP. > 2. If it is with public IP, check if its IP and Source port is as claimed > in the SIP Message(Invite, Register, etc), if yes, then proceed to treat > this SIP end point with public IP. > 3. If 2 is not true, then this end point may use STUN with wrong detection > result, then we treat it as in 1. > > I wonder if there is any sample configurations for reference? > > Best Regards, > Bill Zhang > Tel: 626-956-0260 ext 601 > Cell: 626-354-0967 > web: www.grandstream.com > email: wzhang(a)grandstream.com > > Bill, nathelper.so has all of that functionality: http://www.openser.org/docs/modules/1.1.x/nathelper.html 1) nat_uac_test & fix_nated_* can do everything you are looking for. Make sure to look at the flags for nat_uac_test. They should probably be >= 19. 2) nat_uac_test only returns true if it detects nat based on your flags. Therefore, you can use logic like this: #--------REGISTER section---------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("23")) { setflag(6); fix_nated_register(); force_rport(); }; #-----INVITE SECTION-------- #(in INVITE message handler) if (nat_uac_test("23")) { setflag(6); } #--------Extra Routes-------------- route[4] { # NAT Traversal Section if (isflagset(6)) { xlog("Fixing NAT in section 4\n"); force_rport(); fix_nated_contact(); force_rtp_proxy(); } } Now you can just call route(4) BEFORE you call your other route(s). 3) I'm not sure that I really follow you on this one... P.S. - You'll also want to run RTPProxy to proxy the media streams for clients that are behind nats. -- Kristian Kielhofner

18 years, 1 month

[Users] Open SER on Best OS

by ram

Hi all What is the best OS to install Open SER on. and its very stable for Prepaid and Post paid Iam trying to install on FC5 or RHEL 4.0 Expert coments will be apprciated Ram

18 years, 1 month

[Serusers] SER & RTPProxy

by Sebastian Gabris

Hello everybody, does anybody have a sample config - file for this scenario : (no authentication, mysql or whatever needed. SER should just relay the call) UA(privateIP) <-> (privateIP)SER(publicIP) <-> UA-(VoIP - Provider, pubicIP) I already tried the onsip configfiles and many other files :) but I still see no way to get this SER - Router working. I already tested this enviroment with siproxd and all worked well. So the problem must be with my config file. Any help would be very appreciated :-) ______________________________________________________________________ XXL-Speicher, PC-Virenschutz, Spartarife & mehr: Nur im WEB.DE Club! Jetzt gratis testen! http://freemail.web.de/home/landingpad/?mc=021130

18 years, 1 month

[Users] Proxy authentication message to wrong port

by M D

Hi I have an OpenSER 1.1 box on a public IP running a config taken more-or-less verbatim from the iptel.org getting started examples. I have a UA behind a PIX which is translating port 5060 on the phone to port 8907 on the firewall. OpenSER is ignoring this and sending replies to INVITEs to port 5060 on the firewall. If it's likely to make any difference, the PATed IP and the IP of the OpenSER box are on the same network. 31 61.574505 193.x.x.15 -> 193.x.x.5 SIP/SDP Request: INVITE sip:5551212@193.x.x.5;user=phone, with session description 32 61.575998 193.x.x.5 -> 193.x.x.15 SIP Status: 407 Proxy Authentication Required Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: SIP Request: Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: method: <INVITE> Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: uri: < sip:5551212@193.x.x.5;user=phone> Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: version: <SIP/2.0> Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: flags=2 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: Found param type 232, <branch> = <z9hG4bK4ae31c203ab6ceb>; state=16 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: end of header reached, state=5 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: Via found, flags=2 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: this is the first via Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: After parse_msg... Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: preparing to run routing scripts... Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: flags=100 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG:parse_to:end of header reached, state=10 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DBUG:parse_to: display={}, ruri={sip:5551212@193.x.x.5;user=phone} Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG: get_hdr_field: <To> [39]; uri=[ sip:5551212@193.x.x.5;user=phone] Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG: to body [< sip:5551212@193.x.x.5;user=phone>^M ] Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: get_hdr_field: cseq <CSeq>: <1> <INVITE> Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG: get_hdr_body : content_length=284 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: found end of header Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG: is_maxfwd_present: max_forwards header not found! Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG: add_param: tag=3783260355 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG:parse_to:end of header reached, state=29 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DBUG:parse_to: display={}, ruri={sip:84410001@193.x.x.5;user=phone} Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: flags=200 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: find_first_route: No Route headers found Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: loose_route: There is no Route HF Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: grep_sock_info - checking if host==us: 12==12 && [ 193.x.x.5] == [193.x.x.5] Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: grep_sock_info - checking if port 5060 matches port 5060 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: XXX INVITE handler: start Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: flags=10000 Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: pre_auth(): Credentials with given realm not found Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: XXX INVITE handler: proxy_authorize failed Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: build_auth_hf(): 'Proxy-Authenticate: Digest realm=" 193.x.x.5", nonce="44d3636e40c00e3f51456a587f994d0f285325af"^M ' Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: parse_headers: flags=ffffffffffffffff Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: check_via_address( 193.x.x.15, 10.200.100.46, 0) Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: DEBUG:destroy_avp_list: destroying list (nil) Aug 4 16:05:38 sip3 /usr/sbin/openser[22195]: receive_msg: cleaning up How can I force proxy_challenge() to send its challenge to port 8907? Cheers, Mark Config: debug=8 fork=yes log_stderror=no listen=193.82.139.5 port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://openserro:openserro@localhost/openser" loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/tm.so" loadmodule "/usr/lib/openser/modules/rr.so" loadmodule "/usr/lib/openser/modules/maxfwd.so" loadmodule "/usr/lib/openser/modules/usrloc.so" loadmodule "/usr/lib/openser/modules/registrar.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" loadmodule "/usr/lib/openser/modules/uri.so" loadmodule "/usr/lib/openser/modules/uri_db.so" loadmodule "/usr/lib/openser/modules/nathelper.so" loadmodule "/usr/lib/openser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", " mysql://openserro:openserro@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); return; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); return; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); } # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); return; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); force_rport(); fix_nated_contact(); }; force_rtp_proxy("l"); }; route(1); return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="CANCEL") { route(1); return; } else if (method=="INVITE") { route(3); return; } else if (method=="REGISTER") { route(2); return; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { log("XXX default handler: start"); # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" && isflagset(6)) { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { log("XXX REGISTER handler: start"); # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { log("XXX REGISTER handler: valid contact and nat_uac_test(19) true"); setflag(6); fix_nated_register(); force_rport(); }; log("XXX REGISTER handler: 100 trying"); sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { log("XXX REGISTER handler: www_authorize failed"); www_challenge("","0"); return; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); return; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; log("XXX REGISTER handler: location saved"); } route[3] { log("XXX INVITE handler: start"); # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { log("XXX INVITE handler: proxy_authorize failed"); proxy_challenge("","0"); return; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); return; }; consume_credentials(); if (nat_uac_test("19")) { setflag(6); } lookup("aliases"); if (uri!=myself) { route(4); route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(4); route(1); } route[4] { log("XXX NAT traversal: start"); # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); } } onreply_route[1] { log("XXX onreply_route: start"); if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); }; }; if (nat_uac_test("1")) { log("XXX onreply_route: nat_uac_test(1) true"); fix_nated_contact(); }; }

18 years, 1 month

[Users] auth_radius

by Pavel D. Kuzin

trying to setup radius and set to work together. sems have a strange problem.... ser recives " 0(5447) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed" but freeradius reply is "Sending Access-Accept of id 172 to 127.0.0.1 port 56137 Reply-Message = "Authenticated" Sip-RPId = "88123321139" Finished request 0 " Please tell me what is a problem? -- Pavel D.Kuzin System Administrator Nodex ISP St. Petersburg, Russia pk(a)nodex.ru http://nodex.ru

18 years, 1 month

[Users] Need help on PHP and Radius

by raviprakash sunkara

Hi Guys... I need to integrate php and raadius... Actually i want to create the own user interface on OPENSER..... That on PHP 5 is having the radis integration . So i need it... Now , I'm using the Radius in openser for " AAA " purpose only... Now I need to develop web interface for my application with radius... plz help me.... on this............. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology Kondapur, Hi-tech city, Hyderabad. www.hyperion-tech.com +91-9985077535

18 years, 1 month

Re: [Users] Can not register to OPENSER

by Bogdan-Andrei Iancu

Hi Bill, you should you call force_rtp_proxy() for a REGISTER? regards, bogdan Bill Zhang wrote: >The issue is, this is a SIP Registration message, it certainly does NOT >contain SDP, in fact there are other SIP messages that does NOT contain SDP >message but still need nathelper to recognize it behind a NAT so that >OPENSER can send response back to the client correctly. > >In summary, nathelper should be able to base on the SIP message to handle it >correctly. > >Best Regards, >Bill Zhang >-----Original Message----- >From: Marc Haisenko [mailto:haisenko@comdasys.com] >Sent: Thursday, August 03, 2006 12:09 AM >To: users(a)openser.org >Cc: Bill Zhang >Subject: Re: [Users] Can not register to OPENSER > >On Thursday 03 August 2006 00:46, Bill Zhang wrote: > > >>Anyone knows why I keep getting following error message? >> >> >> >>Aug 2 13:10:26 localhost openser[30695]: ERROR: extract_body: message >> >> >body > > >>has length zero >> >>Aug 2 13:10:26 localhost openser[30695]: ERROR: force_rtp_proxy2: can't >>extract body from the message >> >> > >The message says it, and your SIP message proves it: the SIP message has no >body. > >nathelper operates on the SDP body, it mangles them (together with rtpproxy) > >so that the SDP body sent to the receiver contains the address of your >machine running OpenSER instead of the real phone. This is so that the >machine can act as RTP proxy on network edges. > >Since your SIP message has no SDP body there is nothing nathelper can do :-) >C'ya, > Marc > > > >

18 years, 1 month

[Users] record route

by abhishek kaushik

Hi all, This is abhishek Kaushik from delhi , i am not using record route in my proxy , but still the ACk/Bye passes through my proxy ,can somebody please explain, thanks and regards abhishek kaushik ____________________________________________________________ FREE ONLINE PHOTOSHARING - Share your photos online with your friends and family! Visit http://www.inbox.com/photosharing to find out more!

18 years, 1 month

[Users] The lcr module has incorrect syntax for the current mysql release

by Brandon Price

Of coarse I found this out after upgrading my test box from mysql 5.0.19 to 5.0.22. The lcr module runs the following query... SELECT gw.ip_addr, gw.port, gw.uri_scheme, gw.transport, gw.strip, gw.prefix FROM gw, lcr WHERE ''<sip:12345678910@eastern.mynoc.net>'' LIKE lcr.from_uri AND '15184782222' LIKE CONCAT(lcr.prefix, '%') AND lcr.grp_id = gw.grp_id ORDER BY CHAR_LENGTH(lcr.prefix), lcr.priority DESC, RAND() which returns ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ':12345678910@eastern.mynoc.net>'' LIKE lcr.from_uri AND '15184782222' LIKE CONCA' at line 1 the correct query would be ... SELECT gw.ip_addr, gw.port, gw.uri_scheme, gw.transport, gw.strip, gw.prefix FROM gw, lcr WHERE '<sip:12345678910@eastern.mynoc.net>' LIKE lcr.from_uri AND '15184782222' LIKE CONCAT(lcr.prefix, '%') AND lcr.grp_id = gw.grp_id ORDER BY CHAR_LENGTH(lcr.prefix), lcr.priority DESC, RAND(); Notice that I removed the double single quotes around <sip: 12345678910(a)eastern.mynoc.net> which is the from uri. This appears to be broken in current cvs as well.

18 years, 1 month

← Newer
1
...
26
27
28
29
30
31
32
...
36
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2006