sr-users July 2006

sr-users@lists.kamailio.org

206 participants
414 discussions

[Users] Double Invites
by Dimo 10 Jul '06

10 Jul '06

Hello, I have put my openser box between two sipp generator/server scripts again and I noticed something that might be a problem. Every 200-300 messages i get relayed double invites from the openser. The two invites comming out of openser are only microseconds apart and are for the same message - they have only one invite corresponding from sipp generator. I then noticed that this is happening with other messages too. I am using t_relay and as far as I can see there is no way that two consecutive t_relays are called, since i exit after each relay in my script. Any suggestions? Could this be a config problem. Maybe a bug in the retransmit timers t_relay is using? How can i check if this is the case? Thanks, Dimitar

2 2

[Serusers] TRUSTED Table
by Alberto Cruz 09 Jul '06

09 Jul '06

Hi everybody. Does anybody know which module is using the TRUSTED table? I was digging all the the README documentation from the modules but I couldn't find any mention about this table or functions related to it. Regards Alberto Cruz

2 4

[Users] CDR how to's HELP
by ravi reddy 08 Jul '06

08 Jul '06

Hi users i managed to install openser with mysql database for authenticating and authorizing and iam using freeradius-1.1.1 for accounting ususally i can see the account start -stop mesages in /usr/local/var/log/radius/radacct/127.0.0.1/detail-xxxxxxxxxx (for every day account messages ) so, here is my problem is what i have to do with this data to convert in to a viewable CDR's :-( i have downloaded CDRTool .tar.gz and i found some docs regarding INSTALL,RATING,etc...but its very difficult to understand because its using Apache and phplib which i dont know at all All I need is to export the call details in some other place and doing some makeup and to prepare a billing CDR Can any body please help me in this matter or can you suggest any docs related to this matter Thankyou very much Regards Ravi.

1 0

[Users] Secondary Group Association
by Tavis P 08 Jul '06

08 Jul '06

I'd like to be able to have OpenSER run with a secondary group association other than its primary group (set in openser config as group=groupname, or if group= is left out then uses the primary group in /etc/passwd) I've tried setting group= twice however then it only takes the last assignment. I've tried leaving out any group= definition in openser.cf however it then only uses the primary group in /etc/passwd Is it not possible? If so then what changes would be required to make it work?

2 3

[Users] CDR tool
by Kenny Chua 08 Jul '06

08 Jul '06

Hello all, I'm currently trying to install CDRtool to work with openser. Did anyone able to do this succesfully? I came to the part where I want to execute Edit setup/setup_mysql.sh, change the default password from file setup/creat_users.mysql and run /var/www/CDRtool/setup/mysql/setup_mysql.sh password hostname But I got this error: error: 'Unknown MySQL server host 'drop' (1)' Check that mysqld is running on drop and that the port is 3306. You can check this by doing 'telnet drop 3306' I think something is wrong with the setup_mysql.sh script. Anybody fixed this? --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail Beta.

2 1

[Users] Openser and MediaProxy
by Victoria Cortez 07 Jul '06

07 Jul '06

Hello all: I suppose this is not the first time that someone make this question, you may be tired of this, but believe me, I've not found much information about this. Here we go: Can you help me to make my Openser work with Mediaproxy. Below is my openser.cfg and my mediaproxy.ini A call from a Nated Calling Party results on "Message to big" error. Thanks in advance, guys. Victoria Cortez --------------------------------------------------------------------------------------------------------------------------------------------------------- File: openser.cfg # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ module loading ---------------------------------- mpath="/usr/local/lib/openser/modules/" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mysql.so" loadmodule "domain.so" loadmodule "mediaproxy.so" # mediaproxy modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock") modparam("mediaproxy", "natping_interval", 20) # registrar modparam("registrar", "nat_flag", 6) modparam("registrar", "default_expires", 60) modparam("registrar", "min_expires", 30) modparam("registrar", "use_domain", 1) modparam("usrloc", "use_domain", 1) modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Demasiados Saltos"); }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); return; }; if (method==INVITE) { if (client_nat_test("3")) { setflag(6); use_media_proxy(); route(1); return; } }; if (method==BYE || method==CANCEL) { end_media_session(); }; if (method==REGISTER) { route(2); return; }; if (method==INVITE) { route(3); return; } if (!t_relay()) { sl_reply_error(); }; } # TODOS route[1] { t_on_reply("1"); if (!t_relay()) { if (method==INVITE || method==ACK) { end_media_session(); }; sl_reply_error(); }; } # REGISTER route[2] { if (client_nat_test("3")) { log(1, "Se registro un cliente NAT"); setflag(6); fix_contact(); force_rport(); }; sl_send_reply("100", "Trying"); if (!save("location")) { sl_reply_error(); }; } # INVITE route[3] { if (client_nat_test("3")) { setflag(7); force_rport(); fix_contact(); } if (!lookup("location")) { sl_send_reply("404", "No se encuentra el destino."); return; } if (isflagset(6) ||isflagset(7)) { use_media_proxy(); } route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { use_media_proxy(); } if (client_nat_test("1")) { fix_contact(); } } ---------------------------------------------------------------------------------------------------------------------- File: mediaproxy.ini ; ; Configuration file for MediaProxy ; [Dispatcher] ; ; Section for configuring the proxy dispatcher ; ; The following options are available here: ; ; start Boolean value that specifies if to start the dispatcher. ; Default value: Yes ; ; socket Path to the UNIX socket where the dispatcher receives commands ; from SER. This should match the value for mediaproxy_socket in ; openser.cfg. Use the keyword None to disable listening on a ; local socket. ; Default value: /var/run/proxydispatcher.sock ; ; listen Network address where the dispatcher receives commands from ; a remote Mediaproxy to close sessions for which media did ; timeout. ; Valid values for this are: ; ; - Default ; when using this keyword it will listen on 0.0.0.0:25061 ; - address[:port] ; listen on the specified address and port ; address can be an IP a hostname or the keyword Any ; (in which case it will listen on 0.0.0.0). If address is ; a hostname, that should map in DNS to an IP address ; present on the machine, through an A record. ; If port is missing assume 25061. ; ; Default value: Default ; ; group Put the socket in this group and make it group writable. ; Default value: openser ; ; defaultProxy Default mediaproxy to use in case the From/To domains ; involved in the call don't define any. ; Valid values for this are: ; ; - None ; don't use any default proxies. domains without ; mediaproxy SRV records won't work ; - /path/to/unix/socket ; use a single MediaProxy server identified by the given ; UNIX socket path ; - IP_or_hostname[:port] ; use a single MediaProxy server identified by its network ; address. The network address consists of an IP address ; or a hostname and an optional port number separated by ; a double colon. If port is missing 25060 will be assumed. ; Examples: ; 10.0.0.1 (connect to 10.0.0.1 on port 25060) ; 10.0.0.1:90 (connect to 10.0.0.1 on port 90) ; mp1.mydomain.com ; mp1.mydomain.com:7000 ; - domain://domain_name ; Use all MediaProxies defined by domain_name, honoring ; their priority and weight to create a cluster of proxies ; with fallback and load balancing capabilities. ; ; Default value: /var/run/mediaproxy.sock ; start = yes socket = /var/run/proxydispatcher.sock group = openser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] ; ; Section for configuring the MediaProxy server ; ; The following options are available here: ; ; start Boolean value that specifies if to start the RTP proxy server. ; Default value: Yes ; ; socket Path to the UNIX socket where MediaProxy receives commands ; from the dispatcher or SER. Use the keyword None to disable ; listening on a local socket. ; Default value: /var/run/mediaproxy.sock ; ; group Put the socket in this group and make it group writable. ; Default value: openser ; ; listen Network address where MediaProxy receives commands from ; a remote dispatcher. ; Valid values for this are: ; ; - None ; don't listen for network connections at all ; - address[:port] ; listen on the specified address and port ; address can be an IP a hostname or the keyword Any ; (in which case it will listen on 0.0.0.0). If address is ; a hostname, that should map in DNS to an IP address ; present on the machine, through an A record. ; If port is missing assume 25060. ; ; Default value: None ; ; allow List of addresses that are allowed to connect to this ; MediaProxy server and send commands. ; They are specified as a comma separated list of entries, with ; each entry being specified in the CIDR network/mask notation ; (ex. 10.0.0.0/8) ; ; In addition simple IP addresses or hostnames are allowed, in ; which case the mask is considered to be 32. ; ; In addition to network ranges/addresses 2 keywords can be used ; for this option: ; None to specify that none is allowed to connect (not very ; useful but this is the default for security reasons) ; Any to specify that anyone is allowed to connect ; (dangerous!) ; ; Example: allow = 10.0.0.0/24, home-pc.mydomain.com, 1.2.3.4 ; ; Default value: None ; ; proxyIP IP address to use to talk to the phones. If not specified, the ; first found will be used. However first found usually means ; first defined in /etc/hosts which may not be what you want. ; If you find that the address that's automatically selected is ; not the one you want, you can specify the right one using this ; option. The address must be one that's present on one of the ; host's interfaces. ; ; portRange The range of ports to use for proxying the rtp streams. ; This option is specified as minport:maxport with minport and ; maxport being even numbers in the range 1024-65536 ; Default value: 60000:65000 ; ; TOS Mark all forwarded RTP packets with this specific TOS value. ; Unless you know what TOS means, leave this option alone. ; The TOS value can be specified either as a decimal number or ; as a hex number in the 0xnn format. ; Default value: 0xb8 ; ; idleTimeout Expire idle sessions after this much time. ; Default 60 seconds ; ; holdTimeout Expire calls on hold after this much time. ; Default value is 3600 seconds ; ; forceClose Forcibly close a RTP session after this many seconds even if ; it's still active. If forceClose is 0, then a session is never ; closed no matter how long it lasts. ; Default value: 0 ; start = yes socket = /var/run/mediaproxy.sock group = openser listen = None allow = None proxyIP = 216.55.240.84 portRange = 60000:65000 TOS = 0xb8 idleTimeout = 60 holdTimeout = 3600 forceClose = 0 accounting = off [Accounting] dbaccounting = off [Database] user = dbuser password = dbpass host = dbhost database = radius table = radacct

2 1

[Serusers] Call Forward Billing
by Rosa De Santis 07 Jul '06

07 Jul '06

Hello all. Please, can somebody help about changing the billing when making call forward ? I'm trying to change the billed user when A calls B, B forwards to C (C is PSTN). I want to charge the call to B. I'm using Ser+Asterisk B2BUA. Any idea, please? Thanks Rosa. _________________________________________________________________ Be one of the first to try Windows Live Mail. http://ideas.live.com/programpage.aspx?versionId=5d21c51a-b161-4314-9b0e-49…

2 1

[Serusers] Authentication prefix
by CM0002＠aol.com 07 Jul '06

07 Jul '06

Does not work. it seems that the flag 1 pointing to acc is the problem. My calls are rejected because the new prefix can not be found in a corresponding acc script I guess. Any idea how to solve? Thanks! CFM

1 0

[Serusers] SER Flat file Accounting
by Emerson Oatis 07 Jul '06

07 Jul '06

Hi list, What are the parameters should i pass on modparam acc to enable a flat file accounting say on /var/log/ser_acc.log modparam (acc, log_ftm, ?) and the setflag is set to 1? thanks and regards, emer

1 0

[Users] release 1.1.0 status
by Daniel-Constantin Mierla 07 Jul '06

07 Jul '06

Hello, just to give you an update about the status of the new release. It should be out in terms of days. Between developers, it was scheduled to happen at the beginning of this week, but the feedback we got in the last week made us to postpone it a bit. New issues were reported during mentioned period and we were hunting them, willing to have the release free of known bugs. Last week issues: - possible memory leak in TLS (lot of testing and debugging) - memory leak in tm (fixed) - crash in register when using path extension (fixed) - crash in pike (fixed) - crash in usrloc when user updated contact after migrating from non-NAT to NAT environment (fixed) - investigate "detached timer" warning (low priority) - is_avp_set() fails when to check AVPs with index (patch made, testing in progress) Cheers, Daniel

1 1

← Newer
1
...
31
32
33
34
35
36
37
...
42
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2006