sr-users July 2006

sr-users@lists.kamailio.org

206 participants
414 discussions

[Serusers] forwarding PSTN calls
by luke.2.pilgrim＠bt.com 26 Jul '06

26 Jul '06

Hi, I am new to ser and have recently set my server although I have no PSTN breakout on the server. I have a separate server running Asterisk which has an ISDN card with breakout to the PSTN network. I would like to set SER up to forward all PSTN calls to my Asterisk server. Has anyone got an idea as to how I do this? Regards, Luke.

1 0

[Fwd: Re: [Users] newbie - have openser handle 302s]
by Klaus Darilion 26 Jul '06

26 Jul '06

forwarded to list -------- Original Message -------- Subject: Re: [Users] newbie - have openser handle 302s Date: Tue, 25 Jul 2006 08:48:38 -0700 (PDT) From: Eliezer Ramm <lazerramm(a)yahoo.com> To: Klaus Darilion <klaus.mailinglists(a)pernau.at> Hi, thanx for taking the time to answer. the scenerio i have is like this openser sends all numbers that are not registerd to it to a special GW. the special GW then responds w/ a 302 redirect providing the correct route info for that number. i need openser to take the info from the 302 and resend the invite to the address in the 302 (contatct field). i am using a cfg from the uac_redirect sample to make it as simple as possible. w/ openser debug=7 i see the following : 6(22001) SIP Request: 6(22001) method: <INVITE> 6(22001) uri: <sip:2127896543@212.25.92.160> 6(22001) version: <SIP/2.0> 6(22001) parse_headers: flags=2 6(22001) Found param type 235, <rport> = <n/a>; state=6 6(22001) Found param type 232, <branch> = <z9hG4bK743485B539502E0CEF68B9C9AD6C2DFD>; state=16 6(22001) end of header reached, state=5 6(22001) parse_headers: Via found, flags=2 6(22001) parse_headers: this is the first via 6(22001) After parse_msg... 6(22001) preparing to run routing scripts... 6(22001) grep_sock_info - checking if host==us: 13==9 && [212.25.92.160] == [127.0.0.1] 6(22001) grep_sock_info - checking if port 6666 matches port 5060 6(22001) grep_sock_info - checking if host==us: 13==13 && [212.25.92.160] == [212.25.92.160] 6(22001) grep_sock_info - checking if port 6666 matches port 5060 6(22001) grep_sock_info - checking if host==us: 13==9 && [212.25.92.160] == [127.0.0.1] 6(22001) grep_sock_info - checking if port 6666 matches port 5060 6(22001) grep_sock_info - checking if host==us: 13==13 && [212.25.92.160] == [212.25.92.160] 6(22001) grep_sock_info - checking if port 6666 matches port 5060 6(22001) lookup(): '2127896543' Not found in usrloc 6(22001) DEBUG: t_newtran: msg id=1 , global msg id=0 , T on entrance=0xffffffff 6(22001) parse_headers: flags=ffffffffffffffff 6(22001) DEBUG:parse_to:end of header reached, state=9 6(22001) DEBUG: get_hdr_field: <To> [32]; uri=[sip:2127896543@212.25.92.160] 6(22001) DEBUG: to body [<sip:2127896543@212.25.92.160> ] 6(22001) get_hdr_field: cseq <CSeq>: <39892> <INVITE> 6(22001) DEBUG: get_hdr_body : content_length=293 6(22001) found end of header 6(22001) parse_headers: flags=78 6(22001) t_lookup_request: start searching: hash=12315, isACK=0 6(22001) DEBUG: RFC3261 transaction matching failed 6(22001) DEBUG: t_lookup_request: no transaction found 6(22001) DEBUG: add_param: tag=1071031469 6(22001) DEBUG:parse_to:end of header reached, state=29 6(22001) DEBUG:tm:t_relay: new INVITE 6(22001) parse_headers: flags=ffffffffffffffff 6(22001) check_via_address(172.16.100.101, 172.16.100.101, 0) 6(22001) WARNING:vqm_resize: resize(0) called 6(22001) DEBUG:tm:_reply_light: reply sent out. buf=0x8109f18: SIP/2.0 1..., shmem=0xb57725e0: SIP/2.0 1 6(22001) DEBUG:tm:_reply_light: finished 6(22001) DEBUG: mk_proxy: doing DNS lookup... 6(22001) check_via_address(172.16.100.101, 172.16.100.101, 0) 6(22001) DEBUG: add_to_tail_of_timer[4]: 0xb577133c 6(22001) DEBUG: add_to_tail_of_timer[0]: 0xb577134c 6(22001) SER: new transaction fwd'ed 6(22001) DEBUG:destroy_avp_list: destroying list (nil) 6(22001) receive_msg: cleaning up 7(22002) SIP Reply (status): 7(22002) version: <SIP/2.0> 7(22002) status: <302> 7(22002) reason: <redirect> 7(22002) parse_headers: flags=2 7(22002) get_hdr_field: cseq <CSeq>: <39892> <INVITE> 7(22002) DEBUG: add_param: tag=1 7(22002) DEBUG:parse_to:end of header reached, state=29 7(22002) DEBUG: get_hdr_field: <To> [38]; uri=[sip:2127896543@212.25.92.160] 7(22002) DEBUG: to body [<sip:2127896543@212.25.92.160>] 7(22002) Found param type 235, <rport> = <5060>; state=6 7(22002) Found param type 232, <branch> = <z9hG4bK743485B539502E0CEF68B9C9AD6C2DFD>; state=6 7(22002) Found param type 235, <rport> = <6666>; state=6 7(22002) Found param type 234, <received> = <212.25.92.160>; state=16 7(22002) end of header reached, state=5 7(22002) parse_headers: Via found, flags=2 7(22002) parse_headers: this is the first via 7(22002) After parse_msg... 7(22002) forward_reply: found module tm, passing reply to it 7(22002) DEBUG: t_check: msg id=1 global id=0 T start=0xffffffff 7(22002) parse_headers: flags=22 7(22002) parse_headers: flags=8 7(22002) DEBUG: t_reply_matching: failure to match a transaction 7(22002) DEBUG: t_check: msg id=1 global id=1 T end=(nil) 7(22002) parse_headers: flags=4 7(22002) DEBUG: get_hdr_body : content_length=0 7(22002) found end of header 7(22002) ERROR: forward_reply: no 2nd via found in reply 7(22002) DEBUG:destroy_avp_list: destroying list (nil) 7(22002) receive_msg: cleaning up 10(22005) DEBUG: timer routine:4,tl=0xb577133c next=(nil) 10(22005) DEBUG: retransmission_handler : request resending (t=0xb5771220, INVITE si ... ) 10(22005) DEBUG: add_to_tail_of_timer[5]: 0xb577133c 10(22005) DEBUG: retransmission_handler : done 8(22003) SIP Reply (status): the cfg is as follows: route{ if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; if (!lookup("location")) { # sl_send_reply("404", "Not Found"); # forward( 212.25.94.16, 7777); rewritehostport ("212.25.94.16:7777"); t_relay(); exit; }; } else { # just do redirect t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; } failure_route[1] { get_redirects("*"); t_relay(); } thanx again for your time. eliezer --- Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote: > Take a look at the README of the uac_redirect module > > http://openser.org/docs/ > > regards > klaus > > Eliezer Ramm wrote: > > Hi, > > > > i have a proxy that sends a 302 to my openser. > > > > what do i need to do to have the openser ack the > 302 > > and send a new invite to the address recieved in > the > > 302 ? where would i insert it in my cfg file ? > > > > thanx !! > > > > # ------------------ module loading > > ---------------------------------- > > > > # Uncomment this if you want to use SQL database > > #loadmodule "/usr/lib/openser/modules/mysql.so" > > > > loadmodule > "/usr/local/openser-1.0.1/modules/sl/sl.so" > > loadmodule > "/usr/local/openser-1.0.1/modules/tm/tm.so" > > loadmodule > "/usr/local/openser-1.0.1/modules/rr/rr.so" > > loadmodule > > > "/usr/local/openser-1.0.1/modules/maxfwd/maxfwd.so" > > loadmodule > > > "/usr/local/openser-1.0.1/modules/usrloc/usrloc.so" > > loadmodule > > > "/usr/local/openser-1.0.1/modules/registrar/registrar.so" > > loadmodule > > > "/usr/local/openser-1.0.1/modules/textops/textops.so" > > loadmodule > > "/usr/local/openser-1.0.1/modules/enum/enum.so" > > loadmodule > > "/usr/local/openser-1.0.1/modules/xlog/xlog.so" > > loadmodule > > > "/usr/local/openser-1.0.1/modules/uac_redirect/uac_redirect.so" > > > > # Uncomment this if you want digest authentication > > # mysql.so must be loaded ! > > #loadmodule "/usr/lib/openser/modules/auth.so" > > #loadmodule "/usr/lib/openser/modules/auth_db.so" > > > > # ----------------- setting module-specific > parameters > > --------------- > > modparam("usrloc", "db_mode", 0) > > modparam("rr", "enable_full_lr", 1) > > > > route { > > > > > > # > > > ------------------------------------------------------------------------ > > # Sanity Check Section > > # > > > ------------------------------------------------------------------------ > > > > > > > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483", "Too Many Hops"); > > exit; > > }; > > > > > > > > if (msg:len > max_len) { > > sl_send_reply("513", "Message Overflow"); > > exit; > > }; > > > > # > > > ------------------------------------------------------------------------ > > > > # > > > ------------------------------------------------------------------------ > > if (method!="REGISTER") { > > record_route(); > > }; > > > > # > > > ------------------------------------------------------------------------ > > # Loose Route Section > > # > > > ------------------------------------------------------------------------ > > if (loose_route()) { > > route(1); > > exit; > > }; > > > > # > > > ------------------------------------------------------------------------ > > # Call Type Processing Section > > # > > > ------------------------------------------------------------------------ > > > > > > if (uri!=myself) { > > route(1); > > exit; > > }; > > > > # > > > > if (method=="ACK") { > > route(1); > > exit; > > } > > > > if (method=="REGISTER") { > > route(2); > > exit; > > }; > > > > > > > > lookup("aliases"); > > if (uri!=myself) { > > route(1); > > exit; > > }; > > > > > > if (!lookup("location")) { > > #sl_send_reply("404", "User Not Found"); > > forward( 10.10.10.10, 5060); > > > > exit; > > }; > > > > route(1); > > } > > > > route[1] { > > # > > > ------------------------------------------------------------------------ > > # Default Message Handler > > # > > > ------------------------------------------------------------------------ > > if (!t_relay()) { > > sl_reply_error(); > > }; > > } > > > > route[2] { > > # > > > ------------------------------------------------------------------------ > > > > # > > > ------------------------------------------------------------------------ > > # simple no-auth registration > > > > if (save("location")) { > > sl_send_reply("200","OK"); > > }; > > > > if (!save("location")) { > > sl_reply_error(); > > }; > > } > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Users] red hat EL3 packages do not support TLS
by Klaus Darilion 26 Jul '06

26 Jul '06

would nice if TLS would be supported. regards klaus

2 1

[Users] Serial Forking and MediaProxy
by Glenn Dalgliesh 26 Jul '06

26 Jul '06

I have been working on adding some serial forking applications to openser with media proxy and it seems to run into issues with media proxy when one of the steps in the serial fork includes a GW with early media and the call hits the timer doesn't complete and moves to the next branch the new media ip doesn't get assigned to mediaproxy but rather stays with the previous calls early media ip. I have seen some mention of this being a problem but nothing recent or conclusive. Is it is possible to make this work and if so what is general concept behind it. Thanks

2 1

FW: [Serusers] SER/MediaProxy Audio issues - NEED HELP
by Marc Rys 26 Jul '06

26 Jul '06

Andrey, Thanks for the reply. I just enabled the dispatcher in the mediaproxy.ini and yes, mediaproxy and the dispatcher are running together when I do the "ps ax". The bad news is I still have one way audio? Does anybody have any ideas what's incorrect in my ser.cfg? I feel so close!! Network Diagram: http://marc.ivalve.net/ser/gif_1.gif NGREP Capture: http://marc.ivalve.net/ser/ngrep1.txt SER.cfg: http://marc.ivalve.net/ser/ser-cfg.txt mediaproxy.ini: http://marc.ivalve.net/ser/mediaproxy-ini.txt Thanks for the help guys. Marc -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: Tuesday, July 25, 2006 10:59 PM To: serusers(a)iptel.org Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Hi, NOTE: Also specify start=yes directive in Dispatcher. Check if both dispatcher and mediaproxy are running *together* with "ps ax" command from console. I also beleive that your NAT handling is broken somewhere (see ur ser.cfg), because private IP even after being treated by SER is still a private IP in both Contact header fields and message body: you can see it in 200 OK response from remote NATed Cisco phone going through SER and coming out after. I hope someone else might address on this issue, plz, for an independent confirmation. Andrey. On 7/25/06, Marc Rys <m.rys(a)rystec.com> wrote: > I've changed allow & listen directives from none & none to what's specified > below. The one way audio problem still exists. > > Network Diagram: http://marc.ivalve.net/ser/gif_1.gif > NGREP Capture: http://marc.ivalve.net/ser/ngrep1.txt > SER.cfg http://marc.ivalve.net/ser/ser-cfg.txt > Orig. mediaproxy.ini http://marc.ivalve.net/ser/mediaproxy-ini.txt > > > I really appreciate the help guys. I'm dying to get this working. > > Marc > > > Mediaproxy.ini > --------------------------------------- > > [Dispatcher] > ;start = yes > socket = /var/run/proxydispatcher.sock > ;group = ser > defaultProxy = /var/run/mediaproxy.sock > > [MediaProxy] > start = yes > socket = /var/run/mediaproxy.sock > group = ser > listen = 12.178.142.235:25060 > allow = Any > proxyIP = 12.178.142.235 > portRange = 10000:10100 > TOS = 0xb8 > idleTimeout = 60 > holdTimeout = 180 > forceClose = 0 > accounting = off > > [Accounting] > user = root > password = > host = localhost > database = ser > table = acc > > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov > Sent: Monday, July 24, 2006 10:48 PM > To: serusers(a)iptel.org > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > Hi, > > What about allow and listen directives in mediaproxy.ini? I remember I > had to specify all the directives, before my mediaproxy started > functioning properly. > > Andrey. > > On 7/25/06, Marc Rys <m.rys(a)rystec.com> wrote: > > > > > > > > Hi Ali, > > > > > > > > Yes the ATA can register with no problems. Still one way audio. I also > > setup a cisco 7960 phone behind NAT as well, and it's having the same one > > way audio problem. > > > > > > Thanks again. > > > > marc > > > > > > ________________________________ > > > > > > From: Ali Zaidi [mailto:aligzaidi@gmail.com] > > Sent: Monday, July 24, 2006 7:50 PM > > > > To: Marc Rys > > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > > > > > To: Marc Rys > > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > > > > > > > > > > > > > Marc, > > > > > > > > > > > > you don't have to configure rtp on ATA since everything handled by > > mediaproxy. You just have to makesure that your ATA can register, using > > correct proxy server, port 5060, credentials, everything else set to > > factory default. > > > > > > > > > > > > let meknow. > > > > > > > > > > > > Note: Set your ATA to factory default, try to register with SER using > > username, password, domain and port 5060. EVERYTHING SHOULD BE FACTORY > > DEFAULT. > > > > > > > > > > > > LET ME KNOW, > > > > > > > > > > > > ALI.... > > > > > > > > > > > > > > > > > > On 7/24/06, Marc Rys <m.rys(a)rystec.com> wrote: > > > > > > > > I just tried all of that.. Still no luck. I even made sure the UA's were > > using ports 10000 and higher. > > > > > > > > Any other suggestions? > > > > > > marc > > > > > > > > > > > > > > > > ________________________________ > > > > > > From: Ali Zaidi [mailto: aligzaidi(a)gmail.com] > > Sent: Monday, July 24, 2006 4:56 PM > > > > > > > > To: Marc Rys > > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > > > > > > > > > Marc, > > > > > > > > > > > > Ok, try restarting ser + MySQL + MediaProxy then reregister your both ATA. > > > > > > > > > > > > let me know, > > > > > > > > > > > > Ali > > > > > > > > > > On 7/24/06, Marc Rys < m.rys(a)ivalve.net> wrote: > > > > Ali, > > > > Thank you for helping. I've changed my mediaproxy.ini file to the > > following. But the one way audio is still happening. > > > > Marc > > > > ----------------------------------------------------------- > > Mediaproxy.ini > > ----------------------------------------------------------- > > > > [Dispatcher] > > ;start = yes > > socket = /var/run/proxydispatcher.sock > > ;group = ser > > defaultProxy = /var/run/mediaproxy.sock > > > > [MediaProxy] > > start = yes > > socket = /var/run/mediaproxy.sock > > group = ser > > listen = None > > allow = None > > proxyIP = 12.178.142.235 # This is where OpenSER installed > > portRange = 10000:10100 > > TOS = 0xb8 > > idleTimeout = 60 > > holdTimeout = 180 > > forceClose = 0 > > accounting = off > > > > [Accounting] > > user = root > > password = > > host = localhost > > database = ser > > table = acc > > > > > > > > ________________________________________ > > From: Ali Zaidi [mailto: aligzaidi(a)gmail.com] > > Sent: Monday, July 24, 2006 4:40 PM > > To: Marc Rys > > Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP > > > > Marc, > > > > Mediaproxy.ini has not RTP ports declare. > > ;portRange = 2000:8000 # These values are set same in ATA's configs <- > > 2000:8000 range conflict with 5060. > > > > Try following, > > portRange = 10000:10100 > > then restart mediaproxy. > > Let me know if you still have problem, i can help further. > > Ali... > > > > > > > > > > > > On 7/24/06, Marc Rys < m.rys(a)rystec.com> wrote: > > Hello All, > > > > I'm fairly new to SER / Mediaproxy.I've been following the examples from > > onsip.org using the latest Getting started docs. > > > > At this point I'm testing with two Grandstream Handytone 486 UA' s.One > > NAT'd, one not. > > > > Please check out the following URL to see a diagram explaining my setup. > > http://marc.ivalve.net/ser/gif_1.gif > > > > "UA-2" cannot hear anything spoken from "UA-1", although I can hear what > is > > said from "UA-2" on "UA-1", but not vice versa.2-way voice is not > > happening. > > > > Both UA's do register to SER.The NAT'd UA couldn't register until I got > > Mediaproxy installed.Mediaproxy does appear to start with out errors. > > Below are my Ser.cfg and Mediaproxy.ini. > > > > Please Help. > > > > Marc > > > > > > > > Ser.cfg > > -------------------------------------------------------------- > > #5a-mysql-mediaproxy-ser.cfg > > debug=3 > > fork=yes > > log_stderror=no > > > > listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE > > port=5060 > > children=4 > > > > dns=no > > rev_dns=no > > fifo="/tmp/ser_fifo" > > fifo_db_url="mysql://ser:heslo@localhost/ser" > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > loadmodule "/usr/lib/ser/modules/sl.so" > > loadmodule "/usr/lib/ser/modules/tm.so" > > loadmodule "/usr/lib/ser/modules/rr.so" > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > loadmodule "/usr/lib/ser/modules/registrar.so" > > loadmodule "/usr/lib/ser/modules/auth.so" > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > loadmodule "/usr/lib/ser/modules/uri.so" > > loadmodule "/usr/lib/ser/modules/uri_db.so" > > loadmodule "/usr/lib/ser/modules/domain.so" > > loadmodule "/usr/lib/ser/modules/mediaproxy.so" > > loadmodule "/usr/lib/ser/modules/nathelper.so" > > loadmodule "/usr/lib/ser/modules/textops.so" > > > > modparam("auth_db|uri_db|usrloc", "db_url", > > "mysql://ser:heslo@localhost/ser") > > modparam("auth_db", "calculate_ha1", 1) > > modparam("auth_db", "password_column", "password") > > > > modparam("nathelper", "rtpproxy_disable", 1) > > modparam("nathelper", "natping_interval", 0) > > > > modparam("mediaproxy","natping_interval", 30) > > modparam("mediaproxy","mediaproxy_socket", > > "/var/run/mediaproxy.sock") > > modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") > > modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") > > > > modparam("usrloc", "db_mode", 2) > > > > modparam("registrar", "nat_flag", 6) > > > > modparam("rr", "enable_full_lr", 1) > > > > route { > > > > # > > ------------------------------------------------------------------------ > > # Sanity Check Section > > # > > ------------------------------------------------------------------------ > > > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483", "Too Many Hops"); > > break; > > }; > > > > if (msg:len > max_len) { > > sl_send_reply("513", "Message Overflow"); > > break; > > }; > > > > # > > ------------------------------------------------------------------------ > > # Record Route Section > > # > > ------------------------------------------------------------------------ > > > > if (method=="INVITE" && client_nat_test("3")) { > > # INSERT YOUR IP ADDRESS HERE > > record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); > > } else if (method!="REGISTER") { > > record_route(); > > }; > > > > # > > ----------------------------------------------------------------- > > # Call Tear Down Section > > # > > ----------------------------------------------------------------- > > > > if (method=="BYE" || method=="CANCEL") { > > end_media_session(); > > }; > > > > # > > ------------------------------------------------------------------------ > > # Loose Route Section > > # > > ------------------------------------------------------------------------ > > > > if (loose_route()) { > > > > if ((method=="INVITE" || method=="REFER") && !has_totag()) { > > sl_send_reply("403", "Forbidden"); > > break; > > }; > > > > if (method=="INVITE") { > > > > if (!proxy_authorize("","subscriber")) { > > proxy_challenge("","0"); > > break; > > } else if (!check_from()) { > > sl_send_reply("403", "Use From=ID"); > > break; > > }; > > > > consume_credentials(); > > > > if (client_nat_test("3") || search("^Route:.*;nat=yes")) { > > setflag(6); > > use_media_proxy(); > > > > }; > > }; > > > > route(1); > > break; > > }; > > > > # > > ------------------------------------------------------------------------ > > # Call Type Processing Section > > # > > ------------------------------------------------------------------------ > > if (uri!=myself) { > > route(4); > > route(1); > > break; > > }; > > > > if (method=="ACK") { > > route(1); > > break; > > } else if (method=="CANCEL") { > > route(3); > > break; > > } else if (method=="INVITE") { > > route(3); > > break; > > } else if (method=="REGISTER") { > > route(2); > > break; > > }; > > > > lookup("aliases"); > > if (uri!=myself) { > > route(4); > > route(1); > > break; > > }; > > > > if (!lookup("location")) { > > sl_send_reply("404", "User Not Found"); > > break; > > }; > > > > route(1); > > } > > > > route[1] { > > # > > ------------------------------------------------------------------------ > > # Default Message Handler > > # > > ------------------------------------------------------------------------ > > > > t_on_reply("1"); > > > > if (!t_relay()) { > > > > if (method=="INVITE" || method=="ACK") { > > end_media_session(); > > }; > > > > sl_reply_error(); > > }; > > } > > > > route[2] { > > # > > ------------------------------------------------------------------------ > > # REGISTER Message Handler > > # > > ------------------------------------------------------------------------ > > > > sl_send_reply("100", "Trying"); > > > > if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { > > setflag(6); > > fix_nated_register(); > > force_rport(); > > > > }; > > > > if (!www_authorize("","subscriber")) { > > www_challenge("","0"); > > break; > > }; > > > > if (!check_to()) { > > sl_send_reply("401", "Unauthorized"); > > break; > > }; > > > > consume_credentials(); > > > > if (!save("location")) { > > sl_reply_error(); > > }; > > > > } > > > > route[3] { > > > > # > > ----------------------------------------------------------------- > > # INVITE Message Handler > > # > > ----------------------------------------------------------------- > > > > if (client_nat_test("3")) { > > setflag(7); > > force_rport(); > > fix_nated_contact(); > > }; > > > > if (!proxy_authorize("","subscriber")) { > > proxy_challenge("","0"); > > break; > > } else if (!check_from()) { > > sl_send_reply("403", "Use From=ID"); > > break; > > }; > > > > consume_credentials(); > > > > lookup("aliases"); > > if (uri!=myself) { > > route(4); > > route(1); > > break; > > }; > > > > if (!lookup("location")) { > > sl_send_reply("404", "User Not Found"); > > break; > > }; > > > > route(4); > > route(1); > > } > > > > route[4] { > > > > #----------------------------------------------------------------- > > # NAT Traversal Section > > # > > ----------------------------------------------------------------- > > if (isflagset(6) || isflagset(7)) { > > if (isflagset(8)) { > > setflag(8); > > use_media_proxy(); > > }; > > }; > > } > > > > onreply_route[1] { > > > > if ((isflagset(6) || isflagset(7)) && > > (status=~"(180)|(183)|2[0-9][0-9]")) { > > > > if (!search("^Content-Length:[ ]*0")) { > > use_media_proxy(); > > }; > > }; > > > > if (client_nat_test("1")) { > > fix_nated_contact(); > > }; > > } > > > > > > ------------------------------------------------------------ > > > > mediaproxy.ini > > ------------------------------------------------------------ > > > > [Dispatcher] > > ;start = yes > > socket = /var/run/proxydispatcher.sock > > ;group = ser > > defaultProxy = /var/run/mediaproxy.sock > > > > [MediaProxy] > > start = yes > > socket = /var/run/mediaproxy.sock > > group = ser > > listen = None > > allow = None > > proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed > > ;portRange = 2000:8000# These values are set same in ATA's configs > > for RTP Range > > TOS = 0xb8 > > idleTimeout = 60 > > holdTimeout = 180 > > forceClose = 0 > > accounting = off > > > > [Accounting] > > user = root > > password = > > host = localhost > > database = ser > > table = acc > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > > -- > > No virus found in this incoming message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > > > > > -- > > No virus found in this outgoing message. > > Checked by AVG Free Edition. > > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

1 0

Re: [Serusers] Problem starting SER 0.9.6 with MYSQL on FreeBSD
by Josel Layno 26 Jul '06

26 Jul '06

Hi there again....I think i got fix some syntax error...typo errors...:) But not this new error...:( voip# ser start 0(1684) ERROR: load_module: could not open module </usr/local/lib/ser/modules/nathelpher.so>: Cannot open "/usr/local/lib/ser/modules/nathelpher.so" 0(1684) parse error (50,13-14): failed to load module 0(1684) set_mod_param_regex: No module matching nathelpher found | 0(1684) parse error (72,19-20): Can't set module parameter 0(1684) set_mod_param_regex: No module matching nathelpher found | 0(1684) parse error (73,19-20): Can't set module parameter 0(1684) parse error (124,48-49): unknown command, missing loadmodule? 0(1684) parse error (216,22-23): unknown command, missing loadmodule? 0(1684) parse error (242,21-22): unknown command, missing loadmodule? ERROR: bad config file (6 errors) I have here my module directory...seems the nathelpher.so is included...*thinking* voip# pwd /usr/local/lib/ser/modules voip# ls -al total 1388 drwxr-xr-x 2 root wheel 1024 Jul 24 13:30 . drwxr-xr-x 3 root wheel 512 Jul 24 13:30 .. -r-xr-xr-x 1 root wheel 14584 Jul 24 13:30 acc.so -r-xr-xr-x 1 root wheel 23708 Jul 24 13:30 auth.so -r-xr-xr-x 1 root wheel 22512 Jul 24 13:30 auth_db.so -r-xr-xr-x 1 root wheel 37176 Jul 24 13:30 auth_diameter.so -r-xr-xr-x 1 root wheel 18096 Jul 24 13:30 auth_radius.so -r-xr-xr-x 1 root wheel 9816 Jul 24 13:30 avp.so -r-xr-xr-x 1 root wheel 9860 Jul 24 13:30 avp_db.so -r-xr-xr-x 1 root wheel 11524 Jul 24 13:30 avp_radius.so -r-xr-xr-x 1 root wheel 51700 Jul 24 13:30 avpops.so -r-xr-xr-x 1 root wheel 8228 Jul 24 13:30 check_ua.so -r-xr-xr-x 1 root wheel 48316 Jul 24 13:30 dbtext.so -r-xr-xr-x 1 root wheel 14188 Jul 24 13:30 dispatcher.so -r-xr-xr-x 1 root wheel 5824 Jul 24 13:30 diversion.so -r-xr-xr-x 1 root wheel 15832 Jul 24 13:30 domain.so -r-xr-xr-x 1 root wheel 14348 Jul 24 13:30 enum.so -r-xr-xr-x 1 root wheel 22292 Jul 24 13:30 exec.so -r-xr-xr-x 1 root wheel 13960 Jul 24 13:30 ext.so -r-xr-xr-x 1 root wheel 14184 Jul 24 13:30 flatstore.so -r-xr-xr-x 1 root wheel 7224 Jul 24 13:30 gflags.so -r-xr-xr-x 1 root wheel 10248 Jul 24 13:30 group.so -r-xr-xr-x 1 root wheel 11080 Jul 24 13:30 group_radius.so -r-xr-xr-x 1 root wheel 28012 Jul 24 13:30 mangler.so -r-xr-xr-x 1 root wheel 9748 Jul 24 13:30 maxfwd.so -r-xr-xr-x 1 root wheel 39844 Jul 24 13:30 mediaproxy.so -r-xr-xr-x 1 root wheel 30736 Jul 24 13:30 msilo.so -r-xr-xr-x 1 root wheel 33180 Jul 24 13:30 mysql.so -r-xr-xr-x 1 root wheel 72724 Jul 24 13:30 nathelper.so -r-xr-xr-x 1 root wheel 7508 Jul 24 13:30 options.so -r-xr-xr-x 1 root wheel 114452 Jul 24 13:30 pa.so -r-xr-xr-x 1 root wheel 21384 Jul 24 13:30 pdt.so -r-xr-xr-x 1 root wheel 43268 Jul 24 13:30 permissions.so -r-xr-xr-x 1 root wheel 22776 Jul 24 13:30 pike.so -r-xr-xr-x 1 root wheel 32520 Jul 24 13:30 postgres.so -r-xr-xr-x 1 root wheel 3960 Jul 24 13:30 print.so -r-xr-xr-x 1 root wheel 27688 Jul 24 13:30 registrar.so -r-xr-xr-x 1 root wheel 22980 Jul 24 13:30 rr.so -r-xr-xr-x 1 root wheel 15344 Jul 24 13:30 sl.so -r-xr-xr-x 1 root wheel 72068 Jul 24 13:30 sms.so -r-xr-xr-x 1 root wheel 9928 Jul 24 13:30 speeddial.so -r-xr-xr-x 1 root wheel 14076 Jul 24 13:30 textops.so -r-xr-xr-x 1 root wheel 213548 Jul 24 13:30 tm.so -r-xr-xr-x 1 root wheel 10784 Jul 24 13:30 uri.so -r-xr-xr-x 1 root wheel 12968 Jul 24 13:30 uri_db.so -r-xr-xr-x 1 root wheel 8648 Jul 24 13:30 uri_radius.so -r-xr-xr-x 1 root wheel 69340 Jul 24 13:30 usrloc.so -r-xr-xr-x 1 root wheel 19976 Jul 24 13:30 xlog.so Is there something to do with ownership/permission..etc? Mediaproxy is runnig on boot. Btw, i did install SER 0.9.6 using FreeBSD ports. I hope u can help me with this. tia. cheers, josel On 7/24/06, openser(a)comcast.net <openser(a)comcast.net> wrote: > > Is mysqld started, if not the way to start it in Fedora 4 is /sbin/service > mysqld start > > -------------- Original message ---------------------- > From: "Josel Layno" <josel70ph(a)gmail.com> > > > > > > > > > > > > > I got to install SER 0.9.6 with Mysql on FreeBSD. But i got some parse > > error. > > How can i trace to find the error on my config file? > > > > voip# ser start > > 0(940) parse error (163,25-35): syntax error > > 0(940) parse error (163,101-102): bad arguments > > 0(940) parse error (174,10-11): syntax error > > 0(940) parse error (174,10-11): invalid operator, == , != or =~ > expected > > ERROR: bad config file (4 errors) > > > > Sorry for my ignorance...what's the relevance of (163,25-35) in ser.cfg? > > > > > > cheers, > > > > josel > > > > > > > ---------- Forwarded message ---------- > From: "Josel Layno" <josel70ph(a)gmail.com> > To: serusers(a)lists.iptel.org > Date: Mon, 24 Jul 2006 18:48:14 +0000 > Subject: [Serusers] Problem starting SER 0.9.6 with MYSQL on FreeBSD > > > > > > > I got to install SER 0.9.6 with Mysql on FreeBSD. But i got some parse > error. > How can i trace to find the error on my config file? > > voip# ser start > 0(940) parse error (163,25-35): syntax error > 0(940) parse error (163,101-102): bad arguments > 0(940) parse error (174,10-11): syntax error > 0(940) parse error (174,10-11): invalid operator, == , != or =~ expected > ERROR: bad config file (4 errors) > > Sorry for my ignorance...what's the relevance of (163,25-35) in ser.cfg? > > > cheers, > > josel > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > >

2 3

RE: [Serusers] SER/MediaProxy Audio issues - NEED HELP
by Marc Rys 26 Jul '06

26 Jul '06

Hi Ali, Yes the ATA can register with no problems. Still one way audio. I also setup a cisco 7960 phone behind NAT as well, and it’s having the same one way audio problem. Thanks again. marc _____ From: Ali Zaidi [mailto:aligzaidi@gmail.com] Sent: Monday, July 24, 2006 7:50 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, you don't have to configure rtp on ATA since everything handled by mediaproxy. You just have to makesure that your ATA can register, using correct proxy server, port 5060, credentials, everything else set to factory default. let meknow. Note: Set your ATA to factory default, try to register with SER using username, password, domain and port 5060. EVERYTHING SHOULD BE FACTORY DEFAULT. LET ME KNOW, ALI.... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com"m.rys(a)rystec.com> wrote: I just tried all of that.. Still no luck. I even made sure the UA's were using ports 10000 and higher. Any other suggestions? marc _____ From: Ali Zaidi [mailto: HYPERLINK "mailto:aligzaidi@gmail.com" \naligzaidi(a)gmail.com] Sent: Monday, July 24, 2006 4:56 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Ok, try restarting ser + MySQL + MediaProxy then reregister your both ATA. let me know, Ali On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@ivalve.net" \n m.rys(a)ivalve.net> wrote: Ali, Thank you for helping. I've changed my mediaproxy.ini file to the following. But the one way audio is still happening. Marc ----------------------------------------------------------- Mediaproxy.ini ----------------------------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = HYPERLINK "http://12.178.142.235/" \n12.178.142.235 # This is where OpenSER installed portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc ________________________________________ From: Ali Zaidi [mailto:HYPERLINK "mailto:aligzaidi@gmail.com" \n aligzaidi(a)gmail.com] Sent: Monday, July 24, 2006 4:40 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Mediaproxy.ini has not RTP ports declare. ;portRange = 2000:8000 # These values are set same in ATA's configs <- 2000:8000 range conflict with 5060. Try following, portRange = 10000:10100 then restart mediaproxy. Let me know if you still have problem, i can help further. Ali... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com" \n m.rys(a)rystec.com> wrote: Hello All, I'm fairly new to SER / Mediaproxy.I've been following the examples from HYPERLINK "http://onsip.org/" \nonsip.org using the latest Getting started docs. At this point I'm testing with two Grandstream Handytone 486 UA' s.One NAT'd, one not. Please check out the following URL to see a diagram explaining my setup. HYPERLINK "http://marc.ivalve.net/ser/gif_1.gif" \nhttp://marc.ivalve.net/ser/gif_1.gif "UA-2" cannot hear anything spoken from "UA-1", although I can hear what is said from "UA-2" on "UA-1", but not vice versa.2-way voice is not happening. Both UA's do register to SER.The NAT'd UA couldn't register until I got Mediaproxy installed.Mediaproxy does appear to start with out errors. Below are my Ser.cfg and Mediaproxy.ini. Please Help. Marc Ser.cfg -------------------------------------------------------------- #5a-mysql-mediaproxy-ser.cfg debug=3 fork=yes log_stderror=no listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { #----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------ mediaproxy.ini ------------------------------------------------------------ [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed ;portRange = 2000:8000# These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org" \nSerusers(a)lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers" \nhttp://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org"Serusers(a)lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers" \nhttp://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

2 3

[Serusers] serweb ul_replication?
by O'Shaughnessy Evans 25 Jul '06

25 Jul '06

Hello, all. I'm trying to find a good way to copy usrloc registrations entered into ser via the FIFO from 1 system to another. I came across the ul_replication setting in serweb's config.php, but it was taken out of CVS back in April. Was this a feature that was going to be added but never came to fruition? My best idea so far is to use sipsak to send a REGISTER message to each ser peer, but that also seems like a bit of a kludge to me so I'm still looking for a more "native" way to do it. From what I've read, the XML-RPC subsystem will give us that kind of ability in the future, but I gather that's still in development. The other option seems to be to hack usrloc with another db_mode that never uses the cache and always checks the db. If you're replicating your ser database between proxies, registration on 1 system will thus produce a registration on all the others. It looks like openser has that feature now but I couldn't find it in the CVS branches of ser, though I read in a report somewhere that it had been added. Does anyone have any experience with this situation that they'd like to share? Any elegant solutions out there? Thanks! I appreciate hearing anything you folks would be willing to share. -- = o'shaughnessy_evans -=- sys_admin @ (aloha|ilhawaii|myworld|turquoise).net = Pacific LightNet, Inc.

1 0

[Serusers] ping
by Marc Rys 25 Jul '06

25 Jul '06

ping -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

1 0

[Users] Locally generated single-hop ACKs with Route headers
by Augustin, Andrew (external) 25 Jul '06

25 Jul '06

Hello, I am using OpenSER v1.0.1 I am currently testing with proxies running OpenSER. I have a problem with ACK messages generated and routed for scenarios where an inititiated call session fails to establish between A and B parties e.g. Unsuccessful No Answer, Unsuccessful Busy. The ACK messages are single hop locally generated responses to the sip error message e.g. '487 Request Terminated', '486 Busy'. The behaviour I observe is that Route headers are 'remembered' from the initiating INVITE message and inserted into the ACK messages automatically generated by OpenSER. This extra Route header causes problems with routing and the generation unwanted messages (error message resends) in addition to expeceted scenario call-flow. It is also visible at the B-Party. I would like to either prevent the creation of, or remove this Route header. I have tried to remove this header using the OpenSER available methods, but this has failed. I have noticed that the known issue described in the document: SIP Express Router v0.8.8 - Developer's Guide under section: 9.6.4 Known Issues appears to describe this problem. "local ACK/CANCELs copy'n'pastes Route and ignores deleted Routes" Has this issue been resolved? If so, from what version of OpenSER? If it has not been resolved, is there a way to resolve or workaround this problem? Best regards, Andrew Augustin

2 1

← Newer
1
...
7
8
9
10
11
12
13
...
42
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2006