sr-users June 2006

sr-users@lists.kamailio.org

203 participants
496 discussions

[Users] mysql re-install??
by Mark Kent 13 Jun '06

13 Jun '06

Hello, Using openser 1.0.1, I'm trying to add multi-domain support using the module "domain".... so I created a database in mysql, stuffed a few entries in it, pointed at it in openser.cfg, and started openser. I get this: 0(0) ERROR: domain:mod_init(): invalid table version (use ser_mysql.sh reinstall) 0(0) init_mod(): Error while initializing module domain Now, I looked into openser_mysql.h and it has a table "version" that lists versions for various databases: INSERT INTO version VALUES ( 'subscriber', '5'); ... INSERT INTO version VALUES ( 'location', '1001'); INSERT INTO version VALUES ( 'aliases', '1001'); ... INSERT INTO version VALUES ( 'gw_grp', '1'); INSERT INTO version VALUES ( 'lcr', '1'); So, what exactly are these "versions"?? How is it possible that a new database that I create/name/point-at should match something in this static list? Thanks, -mark

2 4

[Users] bad avp flags error
by Raymond Chen 13 Jun '06

13 Jun '06

Dear all, trying to upgrade the 1.0.1 configuration to cvs head to test the path module. I keep getting this error no matter what I do. avp_db_load("$from","s:areacode/areacodes") 0(0) ERROR:avops:parse_avp_db:: error - bad avp flags 0(0) ERROR:avpops:fixup_db_avp: parse failed 0(0) ERROR: fix_actions: fixing failed (code=-1) at cfg line 251 0(0) ERROR: fix_expr : fix_actions error ERROR: error -1 while trying to fix configuration thanks Ray

2 1

[Users] Openser+serweb
by ram 13 Jun '06

13 Jun '06

Hi i have download servweb 0.9.4 and installed in FC5, configured as per the installtion documented when i try to access from web, i get error to install classkit when i install classkit, its not available on that site at all how can i rectify this problem Another problem, how can i make accounting system for the user I dont see rate table in my openser databases,when can i export my rate table and integrate with user for billing ram

1 0

[Users] More debugging info?
by Bret Schuhmacher 13 Jun '06

13 Jun '06

Hello all, I'm trying to debug my OpenSER installation. I've edited the config file, told it not to fork and set debug to various numbers (10,30,100,300). All the debugging is to stdout. The problem is that it seems to stop after initialization - I was hoping to see messages for everything - REGISTRATION, INVITE, etc. How can I get a LOT of debug info? Thanks, Bret

2 1

[Users] Jabber & PA modules
by Rodney G. McDuff 13 Jun '06

13 Jun '06

Hi All What is the current state of play with the openser jabber and pa modules? -- Dr. Rodney G. McDuff |Ex ignorantia ad sapientiam Manager, Strategic Technologies Group| Ex luce ad tenebras Information Technology Services | The University of Queensland | EMAIL: mcduff(a)its.uq.edu.au | TELEPHONE: +61 7 3365 8220 |

2 1

[Users] called failed 408 Request timeout
by raviprakash sunkara 13 Jun '06

13 Jun '06

hi users, I need to say just "hello to all" I'm working on openser + radius.. Actually in LAN network its working fine... When I deploy the openser + radius in My main server which is in some other place . its successfully login and When I trying to make call its show the log messages as " Called Failed :- 408 Request TimeOut.... " ========================================================================= modparam('registrar","nat_flag',6) modparam("nathelper","natping_interval",30) modparam("nathelper","ping_nated_only",1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") #################33 modparam("rr", "enable_full_lr", 1) ############################################### route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("13")) { sl_send_reply("483","Too Many Hops........................!"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if(!method== "REGISTER") { record_route(); }; # loose-route processing if (loose_route()) { # add now 0n 9 setflag(1); acc_rad_request("200 ok "); t_relay(); exit; }; # account completed transactions via syslog if(uri==myself) { if(method=="REGISTER") { if(!radius_www_authorize("192.168.2.55")) { www_challenge("192.168.2.55","0"); exit; }; #consume_credentials(); save("location"); if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; if(method=="INVITE"|| method=="ACK") { record_route(); acc_rad_request("200"); if(isflagset(6)) { force_rtp_proxy("e"); }; #setflag(1); t_on_reply("1"); }; /* if (method=="BYE") { record_route(); }; */ if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; fix_nat_contact(); if (method=="BYE" || method=="CANCEL") { #log (1, "BYE or CANCEL\n"); #setflag(1); acc_rad_request("200"); #acc_rad_request("Stop"); unforce_rtp_proxy("e"); #setflag(1); }; if(!lookup("location")) { sl_send_reply("404","Woo......... NOt found"); }; }; if(!t_relay()) { sl_reply_error(); }; lookup("aliases"); #setflag(2); exit; } onreply_route[1] { if( isflagset96) && status=~"[0-9][0-9][0-9]") { fix_nat_contact(); force_rtp_proxy("e"); }; } ========================================================================= -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

2 1

[Users] Usrloc failure on startup
by Johannes Lehninger 13 Jun '06

13 Jun '06

Hi, I use openser 1.0.1 and I get the following error on starting it up 0(0) AUTH module - initializing 0(0) AUTH_DB module - initializing vm10:~ # 0(0) usrloc:preload_udomain: Wrong version v136427728 for table <location>, expected v1001 0(0) register_udomain(): Error while preloading domain 'location' 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration My config file is the default one except of the additional modules: mysql,mediaproxy, domain. loadmodule "/usr/local/openser10/lib/openser/modules/mysql.so" loadmodule "/usr/local/openser10/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/openser10/lib/openser/modules/domain.so" loadmodule "/usr/local/openser10/lib/openser/modules/xlog.so" .. # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/openser10/lib/openser/modules/auth.so" loadmodule "/usr/local/openser10/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("auth_db|usrloc|domain", "db_url", "mysql://openser:openserrw@localhost/openser10") modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) Regards Hannes

3 2

[Users] kphone and xlite with TLS
by D'Addelfio Davide 13 Jun '06

13 Jun '06

Hi to all, does anyone know if user agent Kphone and X-lite supports TLS in Openser? Thanks in advance for reply. Davide

2 1

[Users] Authentication using auth_diameter
by Dave Waiting 13 Jun '06

13 Jun '06

I am able to authenticate users using Radius without problem, but I am struggling to do the same using Diameter. I have installed the Diameter Server Client (DISC) that is mentioned in the auth_diameter readme, and have it listening on port 3000. When I start openSER there are no errors (i.e. the auth_diameter module loads), but the DISC client complains that the peer is unknown. Both SER and the DISC client are running on the same machine, so I added aaa://localhost as a peer, but that does not seem to help. Looking at a tcpdump output it shows that SER is trying to contact the DISC client from a range of ports but is never successful. Are there any further installation manuals, sample configurations or tutorials on this topic? Regards Dave

2 1

Re: [Users] DID Origination
by Bogdan-Andrei Iancu 13 Jun '06

13 Jun '06

Hi Kevin, the proper mailing list for this kind of topics is business(a)openser.org. regards, bogdan Kelvin Williams wrote: > This post is definitely going to be off-topic and I ask for your > forgiveness in advance. > > However, we are a cable ISP and are looking to provide voice services > to our cable modem subscribers. We’ve been in talks with several > companies which provide DID Origination and Termination but want to > make sure we’ve covered them all before making a decision on which to > pick, or would like to get suggestions from anyone in our same (or > like) position of companies to look at or stay away from. > > You can reply to me directly to prevent the list from being populated > with off-topic subjects. > > Thanks, > > Kw > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

← Newer
1
...
30
31
32
33
34
35
36
...
50
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2006