sr-users June 2006

sr-users@lists.kamailio.org

203 participants
496 discussions

Re: [Serusers] replicate problems with openser.
by Andrey Kouprianov 16 Jun '06

16 Jun '06

1. Specify "listen=x.x.x.x" and add "children=N" directive as well (e.g. children=5) 2. Could not resolve blah-blah comes from the fact that you do not have a DNS reverse entry for this IP address. Try specifying the following directives. They might help. dns=no rev_dns=no Regards, Andrey. P.S. - This is just a warning, so dont worry too much. Nevertheless, seeing warnings is not that pleasant anyway. I understand your concern. ;-)

1 0

[Users] Not Hearing voice..problem with audio
by raviprakash sunkara 16 Jun '06

16 Jun '06

Hi User, I just to say Hello ! to all.... I using openser ....When I making the call from one A place to other B place.. THe place B having the openser server When making the calls from A to B calls are invited but,,,Not hearing the voices. But Local network its working.. I'm used the Nathelper mdules and installed the rtpproxy. And below my openser file.. plz check it.. solve the issues. modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc", "log_fmt", "cdfimorstup") #modparam("acc", "failed_transaction_flag",3) modparam("acc", "report_cancels", 1) modparam("acc","report_ack",0) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc","radius_flag",1) #modparam("acc","radius_level",1) #modparam("acc","radius_missed_flag",2) modparam("acc","service_type",15) #modparam("acc", "detect_direction", 1) modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("auth_radius","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") ##########33 modparam("nathelper","natping_interval",30) modparam("nathelper","ping_nated_only",1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") #################33 modparam("rr", "enable_full_lr", 1) ############################################### route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("13")) { sl_send_reply("483","Too Many Hops........................!"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if(!method== "REGISTER") { record_route(); }; # loose-route processing if (loose_route()) { # add now 0n 9 setflag(1); acc_rad_request("200 ok "); t_relay(); exit; }; # account completed transactions via syslog #setflag(1); # setflag(2); if(uri==myself) { if(method=="REGISTER") { if(!radius_www_authorize("192.168.2.55")) { www_challenge("192.168.2.55","0"); exit; }; #consume_credentials(); save("location"); if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; if(method=="INVITE" && method=="ACK") { record_route(); acc_rad_request("200"); force_rtp_proxy(); #setflag(1); t_on_reply("1"); }; /* if (method=="BYE") { record_route(); }; */ if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { #log (1, "BYE or CANCEL\n"); #setflag(1); acc_rad_request("200 "); #acc_rad_request("Stop"); #unforce_rtp_proxy(); #setflag(1); }; if(!lookup("location")) { sl_send_reply("404","Woo......... NOt found"); }; }; if(!t_relay()) { sl_reply_error(); }; lookup("aliases"); #setflag(2); exit; } onreply_route[1] { if(status=~"[0-9][0-9][0-9]") { force_rtp_proxy(); }; } -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Serusers] Still Not able to connect softphone on 5065
by sumit dengri 16 Jun '06

16 Jun '06

sir, I am using XLite softphone and also make necessary changes in its settings but its not working. Is it sufficient to change port number only in global parameters section of ser.cfg? plz help once again. regards. --------------------------------- Yahoo! India Answers: Share what you know. Learn something new Click here Send free SMS to your Friends on Mobile from your Yahoo! Messenger Download now

3 2

[Serusers] Problem in changing port of SER
by sumit dengri 16 Jun '06

16 Jun '06

sir I have changed default port 5060 to 5065 in ser.cfg in Global configuration parameters section. Server started beautifully. But I am not able to connect soft phones to the server. Softphone showed 'Login Failed' So PLZ tell me if I have to make any other changes in configuration file or any other file. regards --------------------------------- Yahoo! India Answers: Share what you know. Learn something new Click here Send free SMS to your Friends on Mobile from your Yahoo! Messenger Download now

2 1

[Serusers] openser IP listen: but only itself or all IPs...
by Shenen Shenen 16 Jun '06

16 Jun '06

Hi I've a question; I've added some SIP softphones in openser and they're ok in the database;(I've seen that they're registered) I've this softphone(x-lite and phoner) in a Xp pc with IP 192.16.25.10, so I've registered in my openser on an asterisk at home box in the following way; openserctl add 650 1234 650(a)192.16.25.10 openserctl add 651 1234 651(a)192.16.25.10 My openser in on an asterisk at home with 192.16.25.12 like IP; If I run the openser command, I've this; Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.16.25.12 [192.16.25.12]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.16.25.12 [192.168.251.12]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 Is it right or I've to put in openser.cfg the following lines? listen=192.16.25.12 listen=192.16.25.10 but If I put this 2 lines, I've the following when I run openser; Listening on udp: 192.168.251.200 [192.168.251.200]:5060 udp: 192.168.251.12 [192.168.251.12]:5060 udp: 192.168.251.11 [192.168.251.11]:5060 tcp: 192.168.251.200 [192.168.251.200]:5060 tcp: 192.168.251.12 [192.168.251.12]:5060 tcp: 192.168.251.11 [192.168.251.11]:5060 Aliases: I think isn't right...... My question is: In the first case,without editing the openser.cfg, openser listen also on the Xp pc?Or only on 192.16.25.12 and 127.0.0.1? How can I make that openser can listen on all the IP?(I want that it listens on my Xp and then on others...)

1 0

RE: [Serusers] Presentity & Rls databases
by İlker Aktuna \(Koç.net\) 16 Jun '06

16 Jun '06

Hi, Anyone who has information about this ? thanks ilker ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) Sent: Thursday, June 15, 2006 9:33 AM To: serusers(a)lists.iptel.org Subject: [Serusers] Presentity & Rls databases Hi, In my Ser installation with mysql db, I see some tables for presentity and RLS such as; | presentity | | presentity_contact | | presentity_notes | | presentity_persons | | rls_subscription | | rls_vs | | rls_vs_names | But they are empty tables and seems that they are not used anyhow. How can I make use of these tables ? I wonder how to save presence info on db. Thanks for any information. Regards, ilker _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________ <http://387555.sigclick.mailinfo.com/sigclick/01090500/0C044F07/02040749/0B6…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Serusers] problem in adding exec module in ser.cfg
by Shashwat Gupta 16 Jun '06

16 Jun '06

I am trying to mail shashwat user for any message that passes through my ser and destined for shashwat. I found that it could be done through existing exec module... so I added following lines to ser.cfg loadmodule "/usr/local/lib/ser/modules/exec.so" along with other module of ser.cfg in route {} I added following lines if (uri=~"^sip:shashwat@") { exec_msg("echo 'body: call arrived'|mail -s 'call for you' shashwat"); } but when I restart server I found that even then shashwat is not getting any mail from ser server.... I am not able to find out the possible reason ..any idea how can make I makei it work.. It will be great help for me thanks in advance -- regards shashwat gupta

1 0

[Serusers] which version of eyebeam to work with presence server
by Yan Tian 16 Jun '06

16 Jun '06

I am wondering which version of eyebeam client works with the new presence server (ie, resource list support + xcap ). The one I have (v1.1.3014w) doesn't use the correct Accpet header for SUBSCRIBE to a resource list and hence is rejected by SER. thanks, - ming

2 1

[Serusers] SER+PostgreSQL module for Accouting
by Emerson Oatis 16 Jun '06

16 Jun '06

hi list! we tried to log accounting of ser on postgres, but it seems that logging was not successful. here are the simulations we did : - we convert all the schema of mysql to postgresql databse (ser schema), just minor revision on datatypes since we don't find any posgresql.sql for ser on the net - followed this steps http://www.voip-info.org/wiki/view/SER+module+postgres - recompiled ser to support postgresql database - tried to configure/run ser.cfg to log accounting but no luck - we did some search and tried it first on mysql database - edit the src of acc module and edit the Makefile to support SQL logging, recompile the acc.so - copy the new acc.so to /path/of/ser/modules/ - add db_flag on ser.cfg - now acc mysql was logging - tried to replace the connector from mysql to postgresql on ser.cfg with the same config - ngrep port 5432 on localhost but it seems no request came from ser - ser was running ok and we see logs on /var/log/messages that acc was working * do we missed something? or probably tweak some configuration? * below are snippet of my ser.cfg thanks and regards emer ------------------------------------------------------------ fifo="/tmp/ser_fifo" fifo_db_url="postgres://ser:heslo-757@localhost:5432/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/postgres.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 0) modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db","db_url", "postgres://ser:heslo-757@localhost:5432/ser") # -- acc params -- modparam("acc", "log_level", 1) # that is the flag for which we will account -- don't forget to # set the same one :-) modparam("acc", "log_flag", 1 ) modparam("acc", "db_flag", 1) /* ********* RR ********************************** */ /* grant Route routing if route headers present */ if (loose_route()) { # mark the BYEs -- they are requests within a dialog if(method=="BYE") setflag(1); t_relay(); break; }; /* record-route INVITEs -- all subsequent requests must visit us */ if (method=="INVITE") { setflag(1); record_route(); }; ---------------------------------------------------------------------------------------------------- # postges/ser process 10199 ? S 0:00 ser -f pstn.ser02 10201 ? S 0:00 ser -f pstn.ser02 10205 ? S 0:00 postgres: ser ser 127.0.0.1(56629) idle 10203 ? S 0:00 ser -f pstn.ser02 10209 ? S 0:00 postgres: ser ser 127.0.0.1(56630) idle 10211 ? S 0:00 postgres: ser ser 127.0.0.1(56631) idle 10206 ? S 0:00 ser -f pstn.ser02

1 0

[Serusers] Confusion about ser.cfg file
by sumit dengri 16 Jun '06

16 Jun '06

sir >I have put ser-0.9.6_src.tar.gz in /usr/local and compiled it from here. >Now there are two ser.cfg files created. Are two configuration files created for ser? >One in /usr/local/etc/ser and another one in /usr/local/ser-0.9.6/etc >The problem is when I make changes in /usr/local/etc/ser/ser.cfg according to the docs it shows an error in loading mysql.so module. >And similar changes made in /usr/local/ser-0.9.6/ser.cfg showed no error and server is running very well. >Could anyone tell me the reasons behind this. thanks. __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

← Newer
1
...
24
25
26
27
28
29
30
...
50
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2006