sr-users June 2006

sr-users@lists.kamailio.org

203 participants
496 discussions

RE: [Serusers] Mediaproxy problem - accounting
by İlker Aktuna \(Koç.net\) 23 Jun '06

23 Jun '06

1 0

[Serusers] Mediaproxy problem - accounting
by Adrian Georgescu 23 Jun '06

23 Jun '06

hi Ilker, Pl check if you have the mysql python package installed. On Debian the name of the packet is python-mysqldb ii python-mysqldb 1.2.1c3-4 A Python interface to MySQL also make sure you have the extra fields in the radacct table. Adrian ============= Hi, I am trying to use dbaccounting with mediaproxy. Undfortunately it doesn't seem to send anything to mysql db. How can I trace where the problem is ? My mediaproxy accounting config is : [Accounting] dbaccounting = on [Database] user = ser password = heslo host = 127.0.0.1 database = radius table = radacct Thanks, ilker

1 0

[Serusers] problem to install the the ser
by vijay tiwari 23 Jun '06

23 Jun '06

i have to install SIP Express Router i had downlod the package ser-0.8.11-0.i386.rpm its show installed but show any thing please help me out Name and version of your operating system Linux aster 2.6.11-1.1369_FC4 #1 Thu Jun 2 22:55:56 EDT 2005 i686 i686 i386 GNU/Linux package ser-0.8.11-0.i386.rpm Vijay Tiwari Network Admin Sachitel Communications Noida(U.P.) M- 09871633711 --------------------------------- Do you Yahoo!? Everyone is raving about the all-new Yahoo! Mail Beta.

1 0

[Serusers] Beneficial Hardware For SER
by Nick Hoffman 23 Jun '06

23 Jun '06

Hi guys. Does SER receive greater benefit from CPU, RAM or harddrive upgrades? I have SER running on a P4 3GHz with 1GB of RAM and 7200RPM drives. I've searched through the serusers and serdev mailing lists for this information, but haven't been able to find a definitive answer. Cheers, -- Nick e: nick.hoffman(a)altcall.com p: +61 7 5591 3588 f: +61 7 5591 6588 If you receive this email by mistake, please notify us and do not make any use of the email. We do not waive any privilege, confidentiality or copyright associated with it.

2 1

[Serusers] Forward number to IP
by John Clements 23 Jun '06

23 Jun '06

Is there any way I can forward all calls to 555-1212 to server a.b.c.d? No phone actually connects to my SER server, they connect to other servers. I would just like to be able to have the SER server forward calls to these servers. I can do it by editing the ser.cfg, but would like to be able to do it using the database or radius. All I have found though is it using user accounts. Any ideas? -John

2 1

[Serusers] Stuck with libmysqlclient.so.10 and it is a problem.
by Chahn John Kim 23 Jun '06

23 Jun '06

Hi, all. I am looking for your expert help. I am building ser 0.8.12 on my fedora core 4, just because it is the highest version provided by iptel, while debian has all the newest goodies to .9+. In that, ser's mysql.so links to libmysqlclient.so.10 and this creates problems; *** After ser starts, it immediately shuts down when it loads auth_db.so. due to "authentication protocol" mismatch with mysql server 4.12 which is shipped with Fedora core. Is there 3rd party ser mysql module that uses libmysqlclient.so.14 somewhere? Or is it possible to compile newer verion source to work on fedora? Basically I am looking for ser mysql module that calls so.14 and can run on fedora. Thanks in advance. -- Chahn John Kim Koreanet.US Tel: 847-564-0698 email: johnk(a)koreanet.us johnk(a)netcomusa.us

3 3

[Users] radius accounting problem
by tele 23 Jun '06

23 Jun '06

hi all, reading acc modules README: * There is no session accounting -- OpenSER maintains no sessions. If one needs to correlate INVITEs with BYEs for example for purpose of billing, then it is better done in the entity which collects accounting information. Otherwise, SIP server would have to become sessions-stateful, which would very badly impact its scalability. so it's impossible to do radius accounting for billing purpose? i need a B2BUA for that? any hints? anyway i'm trying radius acct this is my problem: 0(25586) ACC: transaction answered: call_id=d3cd352603256e75@ua1, totag=360701152, from="222" <sip:222@mysip>;tag=d288f8fc7ea68a04, i-uri=sip:111@ss:5060, method=BYE, o-uri=sip:111@ss:5060, fromtag=d288f8fc7ea68a04, code=200, to=<sip:111@mysip>;tag=360701152, uid=n/a, userpart=111 0(25586) ERROR: acc_rad_request: radius-ing failed i've activated all possible debug but i received only this message about radius. i'm trying to activate debug for radiusclient this is my setup: FreeBSD 6.1 OpenSER 1.0.1 radiusclient-0.5.2 thank you

6 12

[Serusers] WINFO
by Alois Schafferhofer 23 Jun '06

23 Jun '06

Hi. If I send a Subscribe with event=presence.winfo, SER answers with "Unsupported document format". In my config file, I have the line "watcherinfo_notify", 1. Where is the problem? I can't find an error in my Subscribe message. Regards, Alois SUBSCRIBE sip:pda_user@fh-joanneum.at SIP/2.0..Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK7288678..Max-Forwards: 70..From: <pda_user(a)fh-joanneum.at> ;tag=1085963678..To: <pda_user(a)fh-joanneum.at>..Call-ID: 1239455995-305180140- 863656382..CSeq: 2 SUBSCRIBE..Contact: <pda_user(a)10.0.0.3>..Content-Leng th: 0..Accept: application/pidf+xml..Allow-Events: application/watcherinfo+xml..Expires: 3600..Event: presence.winfo..User-Agent: ... SIP/2.0 415 Unsupported document format for given package..Via: SIP/2.0/UDP 10.0.0.3:5060;branch=z9hG4bK7288678..From: <pda_user(a)fh-joanneum.at>;tag=1 085963678..To: <pda_user(a)fh-joanneum.at>;tag=589230a54cd08b3768529724501fae28- c331..Call-ID: 1239455995-305180140-863656382..CSeq: 2 SUBSCRIBE..Server : Sip EXpress router (0.10.99-dev35-pa-4.1 (i386/linux))..Content-Length: 0..Warning: 392 10.0.0.11:5060 "Noisy feedback tells: pid=10832 req_src_ip= 10.0.0.3 req_src_port=5060 in_uri=sip:pda_user@fh-joanneum.at out_uri=sip:pda_user@fhjoanneum. at via_cnt==1".

3 2

[Users] Re: could not rev. resolve IP......
by Daniel-Constantin Mierla 22 Jun '06

22 Jun '06

On 06/21/06 13:14, Shenen Shenen wrote: > I've removed the listen parameters....fork was alway set like > fork=yes....with openser command I've this; > [root@asterisk12 ~]# openser > 0(3357) WARNING: fix_socket_list: could not rev. resolve > 192.168.251.12 <http://192.168.251.12> > 0(3357) WARNING: fix_socket_list: could not rev. resolve > 192.168.251.200 <http://192.168.251.200> > 0(3357) WARNING: fix_socket_list: could not rev. resolve > 192.168.251.12 <http://192.168.251.12> > 0(3357) WARNING: fix_socket_list: could not rev. resolve > 192.168.251.200 <http://192.168.251.200> > Listening on > udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 > <http://127.0.0.1>]:5070 > udp: 192.168.251.12 <http://192.168.251.12> [ > 192.168.251.12 <http://192.168.251.12>]:5070 > udp: 192.168.251.200 <http://192.168.251.200> > [192.168.251.200 <http://192.168.251.200>]:5070 > tcp: 127.0.0.1 <http://127.0.0.1> [ 127.0.0.1 > <http://127.0.0.1>]:5070 > tcp: 192.168.251.12 <http://192.168.251.12> > [192.168.251.12 <http://192.168.251.12>]:5070 > tcp: 192.168.251.200 <http://192.168.251.200> > [192.168.251.200 <http://192.168.251.200>]:5070 > Aliases: > tcp: localhost:5070 > udp: localhost:5070 > > stateless - initializing > 0(0) Maxfwd module- initializing > 0(0) AUTH module - initializing > 0(0) AUTH_DB module - initializing > [root@asterisk12 ~]# 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > 0(0) INFO: udp_init: SO_RCVBUF is finally 221184 > 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > 0(0) INFO: udp_init: SO_RCVBUF is finally 221184 > 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > 0(0) INFO: udp_init: SO_RCVBUF is finally 221184 > 0(0) ERROR: tcp_init: bind(7, 0x811b12c, 16) on 127.0.0.1:5070 > <http://127.0.0.1:5070> : Address already in use > > > > > ........so, where could be the problem now? as you can see from the list of ip addresses found by openser, you have no network interface configured with 192.168.251.11. It is why you got errors highlighted in the previous messages. Now, it seems that there is another process using port 5070. Check if it is openser already running. Do "netstat -alut" and see if some application is running on port 5070. Cheers, Daniel > > On 6/21/06, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro>> wrote: > > > > On 06/21/06 12:44, Shenen Shenen wrote: > > No,this isn't the problem;I've changed the port on my openser like > > 5070, and asterisk is set like 5060 in sip.conf, but I've always the > > same error; > > > > Jun 21 03:33:43 asterisk12 openser[19037]: ERROR: udp_init: bind(6, > > > > 0x8119a1c, 16) on 192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11/> < > > http://192.168.251.11/>: Cannot assign > > requested address > > > > .....what could be? > > > do you have a network interface configured with the IP > 192.168.251.11 <http://192.168.251.11>? > Do 'ifconfig' to check it out. > > You can remove the 'listen' parameters from your config file and > openser > will bind to available interfaces -- do not forget to set fork=yes, > otherwise openser will listen to the first interface it founds, > and that > is usually 127.0.0.1 <http://127.0.0.1>. > > Daniel > > > > > > > > > > > On 6/21/06, *Daniel-Constantin Mierla* <daniel(a)voice-system.ro > <mailto:daniel@voice-system.ro> > > <mailto:daniel@voice-system.ro <mailto:daniel@voice-system.ro>>> > wrote: > > > > You can safely ignore reverse resolve DNS messages, they are > warnings > > meaning no hostname was found set for those IP addresses - > openser > > tries > > to get them in the aliases list. The problem comes from line: > > > > Jun 21 03:33:43 asterisk12 openser[19037]: ERROR: udp_init: > bind(6, > > 0x8119a1c, 16) on 192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11 <http://192.168.251.11>> < > > http://192.168.251.11/>: Cannot assign > > requested address > > > > This means that you do not have the IP 192.168.251.11 > <http://192.168.251.11> > > <http://192.168.251.11> configured on the > > system. Do you have asterisk and openser listening on the > same port > > (5060)? You must use different ports. > > > > Cheers, > > Daniel > > > > > > On 06/21/06 10:55, Shenen Shenen wrote: > > > Hi!This my openser.cfg;I've 2 asteriskathome with openser > > installed;I > > > want to copy the authentificated sip registration from one > box to > > > another and have always the same Sip registered in all 2 > box, so if > > > one box falls down the other can run without reinitialized > all the > > > sips (like Phoner..cubix...and also IP phones...)....I'm > using > > > vrrpd...12 is the master, 11 is the slave, 200 is the virtual > > IP(this > > > point to the master in the first case..and all Sip proxies > like the > > > phoner or cubix points to the master..(I can set only 1 > proxy.. > > > 192.168.251.200 <http://192.168.251.200> > <http://192.168.251.200> > > <http://192.168.251.200/> ..in x-lite I can set more > > > proxies and I'vent problems..)(for this I must use openser..) > > > > > > > > > This is the openser on the "slave" 192.168.251.11 > <http://192.168.251.11> > > <http://192.168.251.11> <http://192.168.251.11/> > > > > > > > > > # SCRIPT PER COPIARE LO STATO DELLE REGISTRAZIONI DEI SIP DAL > > .11 al .12 > > > > > > # ----------- global configuration parameters > > ------------------------ > > > > > > debug=3 # debug level (cmd line: -dddddddddd) > > > fork=no > > > log_stderror=no # (cmd line: -E) > > > listen= 192.168.251.12 <http://192.168.251.12> > <http://192.168.251.12> > > <http://192.168.251.12/> > > > listen=192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11> < > > http://192.168.251.11/> > > > listen=192.1668.251.200 > > > port=5060 > > > children=5 > > > dns=no > > > rev_dns=no > > > # ------------------ module loading > > ---------------------------------- > > > > > > loadmodule "modules/mysql/mysql.so" > > > loadmodule "modules/sl/sl.so" > > > loadmodule "modules/tm/tm.so" > > > loadmodule "modules/maxfwd/maxfwd.so" > > > loadmodule "modules/usrloc/usrloc.so" > > > loadmodule "modules/registrar/registrar.so" > > > loadmodule "modules/auth/auth.so" > > > loadmodule "modules/auth_db/auth_db.so" > > > > > > # ----------------- setting module-specific parameters > > --------------- > > > > > > # digest generation secret; use the same in backup server; > > > # also, make sure that the backup server has sync'ed time > > > modparam("auth", "secret", "alsdkhglaksdhfkloiwr") > > > > > > # ------------------------- request routing logic > > ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwars==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > return; > > > }; > > > if (len_gt( max_len )) { > > > sl_send_reply("513", "Message too big"); > > > return; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (uri==myself) { > > > > > > if (method=="REGISTER") { > > > > > > # verify credentials > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > return; > > > }; > > > > > > # if ok, update contacts and ... > > > save("location"); > > > # ... if this REGISTER is not a replica from our > > > # peer server, replicate to the peer server > > > if (!src_ip== 192.168.251.12 <http://192.168.251.12> > <http://192.168.251.12> > > < http://192.168.251.12/>) { > > > t_replicate("192.168.251.12 <http://192.168.251.12> > <http://192.168.251.12> > > <http://192.168.251.12/>", "5060"); > > > }; > > > return; > > > }; > > > # do whatever else appropriate for your domain > > > log("non-REGISTER\n"); > > > }; > > > } > > > > > > > > > > > > This is the openser on the "master" 192.168.251.12 > <http://192.168.251.12> > > <http://192.168.251.12> > > > <http://192.168.251.12/ > > > > > > > > > > > > > > > > > > > # SCRIPT PER COPIARE LO STATO DELLE REGISTRAZIONI DEI SIP DAL > > .12 al .11 > > > > > > # ----------- global configuration parameters > > ------------------------ > > > > > > debug=3 # debug level (cmd line: -dddddddddd) > > > fork=no > > > log_stderror=yes # (cmd line: -E) > > > listen= 192.168.251.12 <http://192.168.251.12> > <http://192.168.251.12> < > > http://192.168.251.12/> > > > listen= 192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11> > > <http://192.168.251.11/> > > > listen=192.1668.251.200 > > > port=5060 > > > children=5 > > > dns=no > > > rev_dns=no > > > > > > # ------------------ module loading > > ---------------------------------- > > > > > > loadmodule "modules/mysql/mysql.so" > > > loadmodule "modules/sl/sl.so" > > > loadmodule "modules/tm/tm.so" > > > loadmodule "modules/maxfwd/maxfwd.so" > > > loadmodule "modules/usrloc/usrloc.so" > > > loadmodule "modules/registrar/registrar.so" > > > loadmodule "modules/auth/auth.so" > > > loadmodule "modules/auth_db/auth_db.so" > > > > > > # ----------------- setting module-specific parameters > > --------------- > > > > > > # digest generation secret; use the same in backup server; > > > # also, make sure that the backup server has sync'ed time > > > modparam("auth", "secret", "alsdkhglaksdhfkloiwr") > > > > > > # ------------------------- request routing logic > > ------------------- > > > > > > # main routing logic > > > > > > route{ > > > > > > # initial sanity checks -- messages with > > > # max_forwars==0, or excessively long requests > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483","Too Many Hops"); > > > return; > > > }; > > > if (len_gt( max_len )) { > > > sl_send_reply("513", "Message too big"); > > > return; > > > }; > > > > > > # if the request is for other domain use UsrLoc > > > # (in case, it does not work, use the following command > > > # with proper names and addresses in it) > > > if (uri==myself) { > > > > > > if (method=="REGISTER") { > > > > > > # verify credentials > > > if (!www_authorize("", "subscriber")) { > > > www_challenge("", "0"); > > > return; > > > }; > > > > > > # if ok, update contacts and ... > > > save("location"); > > > # ... if this REGISTER is not a replica from our > > > # peer server, replicate to the peer server > > > if (!src_ip== 192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11> > > < http://192.168.251.11/>) { > > > t_replicate("192.168.251.11 <http://192.168.251.11> > <http://192.168.251.11> > > <http://192.168.251.11/>", "5060"); > > > }; > > > return; > > > }; > > > # do whatever else appropriate for your domain > > > log("non-REGISTER\n"); > > > }; > > > } > > > > > > If I run the following command... I've problems with > resolution > > of IP > > > addresses... how can I resolve this problem?????????? > > > > > > 100000000000000000000000000000000000000000000000000000 > > > thanks.....................help me please!!!!!I'm becoming > crazy... > > > > > > > > > [ root@asterisk12 ~]# tail -f /var/log/messages > > > Jun 21 03:33:43 asterisk12 openser: WARNING: > fix_socket_list: could > > > not rev. resolve 192.168.251.11 <http://192.168.251.11> < > http://192.168.251.11> > > <http://192.168.251.11/> > > > Jun 21 03:33:43 asterisk12 openser: WARNING: > fix_socket_list: could > > > not rev. resolve 192.168.251.200 <http://192.168.251.200> > <http://192.168.251.200> > > <http://192.168.251.200/> > > > Jun 21 03:33:43 asterisk12 openser[19037]: Maxfwd module- > > initializing > > > Jun 21 03:33:43 asterisk12 openser[19037]: AUTH module - > > initializing > > > Jun 21 03:33:43 asterisk12 openser[19037]: AUTH_DB module - > > initializing > > > Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init: > > SO_RCVBUF > > > is initially 110592 > > > Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init: > SO_RCVBUF > > > is finally 221184 > > > Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init: > SO_RCVBUF > > > is initially 110592 > > > Jun 21 03:33:43 asterisk12 openser[19037]: INFO: udp_init: > SO_RCVBUF > > > is finally 221184 > > > Jun 21 03:33:43 asterisk12 openser[19037]: ERROR: > udp_init: bind(6, > > > 0x8119a1c, 16) on 192.168.251.11 <http://192.168.251.11> < > http://192.168.251.11> > > <http://192.168.251.11/>: Cannot > > > assign requested address > > > Jun 21 03:34:01 asterisk12 crond(pam_unix)[19040]: session > > opened for > > > user root by (uid=0) > > > Jun 21 03:34:01 asterisk12 crond(pam_unix)[19040]: session > > closed for > > > user root > > > > > > > > >

1 0

[Users] mediaproxy.ini with 2 networks
by Andrew And 22 Jun '06

22 Jun '06

I have 2 alias IP (one IP to real network and another IP to network 10.0.0.0) in Proxy SIP, in ProxyIP (file mediaproxy.ini) I need to put the IP. How can I put this 2 IPs in ProxyIP (file mediaproxy.ini)?

1 0

← Newer
1
...
11
12
13
14
15
16
17
...
50
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users June 2006