sr-users May 2006

sr-users@lists.kamailio.org

195 participants
502 discussions

[Serusers] RE: IM + Presence help
by Suraj Kumar 15 May '06

15 May '06

Thanks Vaclav for the information as at one stage I thought my message was lost! Is that the user must need to be in the database? I though the user location in memory should work. Since my registration packet arrives fine and I can see the response to the REGISTER packets, I assume users are are in memory but I could not check from serctl command as I mentioned earlier. I will use the latest serctl but I would like to know if the database is absolutely must for the presence to work? Regards, Suraj ---------------------------------------------------------------------------------- Hi Suraj. Sorry for delayed reply. On Wed, May 03, 2006 at 11:10:32PM -0400, Suraj Kumar wrote: > Hi Vaclav, > > Thanks for the help! That helped!! > > However, when I registered two users from windows messanger, I can login but I cannot see them with the serctl ul show command which shows the following message : > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > 500 Command 'ul_dump' not found > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Might be, that this command is still not implemented (it worked in older SER versions, but it was rewritten then and may be, that it was not reimplemented yet). May be, that new serctl (in tools/serctl in source tree) has another command which is similar to this. Try to look there. > > If i add a contact in the IM client, SER displays the following message: > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > subscription to invalid user sip:201@xxx.xxx.248.115 > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > I have used the config sample from the example with DB in the presence hand book: > but my user location is set as follows : > modparam("usrloc", "db_mode", 0) > There are used functions lookup_user and lookup_domain from modules uri_db and domain (I think) which work with database. The subscription probably fails due to that these functions can not find the user in database. Have you added this user using serctl? Vaclav > > Thanks a lot! > Suraj >

2 1

[Serusers] How to make ser with routing media stream record CDR.
by hlzhangxt 15 May '06

15 May '06

I Setup SER with Mediaproxy. I want to know how to config SER, so that SER can Record the CDR, especially the duration talking time. How to make ser record mediat connectiing time, media disconnectiing time, and duration?

1 0

Re: [Serusers] I have problem with my SERWEB version 0.9.4 (Installed on FC4) , with SER version is 0.9.6
by Karel Kozlik 15 May '06

15 May '06

pear-log package is not probably installed. If it is, see php log or apache error log. Karel Phuong Nguyen Trong napsal(a): > When I enable logging in serweb, and then, I try to access to SERweb home > page( http://mydomain.com/serweb/admin/index.php ). > There is a white page (It means that on screen don't have anything!). > But, when I disable logging, the "log in" web page is display OK. > Could you find any problems on this? > > Phuong Nguyen > IP Clients Group > ESCS Dept > TMA company. > http://www.tma.com.vn/ > -----Original Message----- > From: Karel Kozlik [mailto:karel@iptel.org] > Sent: Wednesday, April 19, 2006 12:31 PM > To: Phuong Nguyen Trong > Cc: serusers(a)lists.iptel.org > Subject: Re: [Serusers] I have problem with my SERWEB version 0.9.4 > (Installed on FC4) , with SER version is 0.9.6 > > Hi, > enable logging in serweb, set log level to debug and see the log file. > > Karel > > Phuong Nguyen Trong napsal(a): >> I try to install SERweb 0.9.4 is running with SER 0.9.6 ( Is it OK?) >> SER is running OK but I don't have software to test the connection is >> managed by SER. Anyone have software to test its? >> >> My major problem is: SERWeb is running OK with user. I can create, update, >> delete user using account of normal user. >> But I cannot access to admin mode using default username ( admin ) and >> default password ( heslo ). The phenomenon of error is: (Only one line to >> describe this error). >> Bad username or password >> Only one line to describe this error. >> I try to solve this problem rely on previous resolved similar problems in >> our mailing lists. But it still have this problem. >> Thanks a lot for any solution of this, >> >> Phuong Nguyen >> >> IP Clients Group >> ESCS Dept >> TMA company. >> http://www.tma.com.vn/ >> >> >> _______________________________________________ >> Serusers mailing list >> serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >

3 2

[Users] LCR (Least Cost Routing) Module
by Andrew And 14 May '06

14 May '06

I would want to know if with the LCR module I could to send more then 1 Invite to IPs destination? I have 2 or more possible OpenSER that could receive Invite with prefix XYZ, than could send a lot of INVITEs at the same time (fork to more than one Openser destination). Is this possible with LCR? If not possible how could I do this?

1 0

[Serusers] VM with SER and Asterisk
by ram 14 May '06

14 May '06

Hi all Does any one integrated Voice mail with Asterisk with SER I have SER running with some options of basic on the stage level to develop my application I would like to add Voice Services to SER So how can i integrate Voice mail option with SER ( not sending mail) Direct dialing some number and hear voices ram

1 0

[Serusers] serweb on Linux Suse 10 not responding !
by Americania .it 13 May '06

13 May '06

I've extract serweb directorys under /srv/www/htdocs (default dir for apache 2). I've created an alias for the path serweb/html . When I call the url on the browser as localhost/serweb localhost/serweb/html localhost/serweb/html/user/index.php localhost/serweb/user/index.php or instead of localhost The IP of the pc or the name of the pc I always get Access denied error Waht can I do ??

1 0

R: [Users] failure_route
by D'Addelfio Davide 13 May '06

13 May '06

Thanks for reply. When I have a 404 Not Found, openser doesn't enter in failure root block and so it doesn't store anything into db. In attach my cfg file. Had a REFER message, why and what does it means? Thanks, Davide -----Messaggio originale----- Da: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Inviato: mercoledì 10 maggio 2006 23.56 A: D'Addelfio Davide Cc: users(a)openser.org Oggetto: Re: [Users] failure_route Hi, D'Addelfio Davide wrote: > Hi all, > > i have 2 questions for the forum: > > 1) What can I do to simulate a failure message to understand if > openser store it into database, through acc_db_request? > just send it back to your proxy with a username that does not exists in RURI -> 404 Not Found. > 2) Have I any chance to get information from reply messages, like > storing some in db or something else? I know I can't use acc and avp > module in on_reply route block, so any suggestion? > not from on_reply but from the failure_route you can. regards, bogdan

2 1

Re: [Users] SDP Invite message modification.
by Bogdan-Andrei Iancu 13 May '06

13 May '06

Hi Shane, these functions works over the message body (SDP in your case). the functions without the "_body" suffix works over the the headers. I guess you find all you need here: http://openser.org/docs/modules/1.1.x/textops.html regards, bogdan Shane Burrell wrote: >Does it also work with SIP headers? And the SDP section? > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Friday, May 12, 2006 4:43 AM >To: Shane Burrell >Cc: users(a)openser.org >Subject: Re: [Users] SDP Invite message modification. > >Hi Shane, > >you have the script functions (from textops) like >(search|replace|subst)_body > http://openser.org/docs/modules/1.1.x/textops.html > >regards, >bogdan > >Shane Burrell wrote: > > > >>I need to proxy and modify the Invite SDP. Can I do this from the cfg >>or do I need to look at a module like nathelper to modify the SDP? >>Below is an example >> >> >> >>Inbound to openser >> >>---Non-Working SDP--- >> >>v=0 >> >>o=nt01-1w-lax 1234 1146761158 IN IP4 152.92.17.27 s=sip call t=0 0 >>m=audio 38936 RTP/AVP 0 18 101 c=IN IP4 152.92.17.27 >> >>a=rtpmap:101 telephone-event/8000 >> >>a=fmtp:101 0-15 >> >> >> >> >> >> >> >>converted to - > >> >> >> >>Outbound to my gateway >> >>v=0 >> >>o=ast12345sg 1220177409 1220177409 IN IP4 152.92.17.27 >> >>s=- >> >>c=IN IP4 152.92.17.27 >> >>t=0 0 >> >>a=sendrecv >> >>m=audio 18006 RTP/AVP 0 18 18 >> >>a=fmtp:18 annexb=no >> >>a=fmtp:18 annexb=yes >> >> >> >>TIA, >> >> >> >>Shane >> >> >> >>------------------------------------------------------------------------ >> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> >> >> > > >

1 0

[Users] Re: [Devel] IMPORTANT: Repository migration
by Bogdan-Andrei Iancu 13 May '06

13 May '06

right! my typing error :(. thanks and regards, bogdan Juha Heinanen wrote: >Bogdan-Andrei Iancu writes: > > > cvs -d:pserver:anonymous@cvs.sourceforge.net:/cvsroot/openser co sip_server > > > > would be changed to > > > > cvs -d:pserver:anonymous@openser.cvs.sourceforge.net:/cvsroot/openser co sip_server > >should be "co sip-server". > >-- juha > >

1 0

[Users] IMPORTANT: Repository migration
by Bogdan-Andrei Iancu 13 May '06

13 May '06

Hi everybody, as SF seams to have problems with CVS access, problems that cannot be reasonable (as time) solved, the board of the project decided to migrate the project repository from CVS to SVN (still being hosted on SF). Starting from now, all CVS access will be blocked as the migration process will start. The complete process may take couple of days (migration and SVN configuration), so please be patience - I will let you know as soon as public and developer access to SVN is available. thanks for understanding, Bogdan

1 1

← Newer
1
...
28
29
30
31
32
33
34
...
51
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2006