sr-users May 2006

sr-users@lists.kamailio.org

195 participants
502 discussions

[Users] CVS freez - testing for 1.1.0 release
by Bogdan-Andrei Iancu 22 May '06

22 May '06

Hi everybody, At midnight, Tuesday 00:00 GMT, the CVS will be frozen and the 1.1.0 branch will enter in a testing and fixing phase - no new stuff will be committed on the cvs, just bugs and conformity fixes. We encourage the users to intensively run and test this version and to report any bugs or misbehaviour. The target is to have the next release in about one month, when hopefully the cumulate fixes will provide a high level of the stability. So, please test and report any problem you found / think you found - this will help us to accelerate the process. Thanks and regards, Bogdan

1 0

[Users] rtpproxy issue
by krishnamurthy kandi 22 May '06

22 May '06

Hi, I am getting the problem with rtp proxy in the case of call forking from ser. After forking, one callee sends 183 session progress (early media),with this rtpsession is established in rtp proxy. Then other callee accept the call, starts sending media, in this case after calling recvfrom function ,raddr structure is not containing exact destination and port, it containts previous packet IP ,current packet port at comparing session IP and remote IPs, once IP is updated, canupdate flag is disabled, then for further invalid IP comparisons , it wont update the remote IP. Thats why rtp is not getting relayed to user agents. Why raddr variable is not containing correct IP and port, why it is showing corrupted information. For my convention I am not checking canupdate flag, now it is disabled, then it is working now.any suggitions. Thanks, kkmurthy --------------------------------- Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2¢/min with Yahoo! Messenger with Voice.

1 0

[Serusers] Question regarding PA snapshot
by Dave 22 May '06

22 May '06

Hi, I downloaded the Presence (PA) snapshot 4.1 and after hours trying to make it work with my OLD SER0.9.6 ser.cfg file, I realized the following: 1) The PA snapshot works with the example ser.cfg provided in the distribution 2) The PA snapshot is "different" from 0.9.6 in terms of DB schema, API's, etc. e.g. there is no "alias" table, subscriber has been renamed to "customer", etc. My questions: 1) Is the PA snapshot meant to run on a separate server handling only SUBSCRIBE, PUBLISH and MESSAGE which are to forwarded by the main SER PROXY? 2) Can I use my ser 0.9.6 proxy and forward all SUB, MESSAGE and PUBLISH to a different server running the PA snapshot? If yes, Do the two servers (SER 0.9.6 and PA 4.1) need to share the SER database or each will run it's own DB schema? 3) It seems that I cannot run my ser.cfg SER PROXY script on the PA 4.1 snapshot due to database and api issues. Does this mean that I need to modify my ser.cfg that does proxying to fit with the PA 4.1 api/database in order to use presence? Any pointers and help will be appreciated. Regards, Dave __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 3

[Users] Multiple aliases -> 404 Not Found
by mika.saari＠wipsl.com 22 May '06

22 May '06

Hi, I do have four domain aliases for my openser server (clip of config below). Each alias should be handled by same server. I register three clients to the server Client 1 = client1(a)isp1v.test.com Client 2 = client2(a)isp1.test.com Client 3 = client3(a)isp1.test.com When calling from Client1 to Client2 (INVITE From URI: client1(a)isp1v.test.com To URI: client2(a)isp1.test.com) I get error 404 not found. But if I call from Client 3 to Client 2 the call is working nicely. I am mainly using the basic OpenSER configuration with minor changes and it seems that the save("location") is saving the registration ok, but lookup("location") won't find what ever it is trying to find when calling from Client1 to Client2. Any ideas, pointers or propably example openser configuration to handle this kind of configuration properly ? Thank you many times, -Mika -- clip --- debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) listen=193.65.64.130 #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" alias="isp1.test.com" alias="isp1v.test.com" alias="isp1s.test.com" alias="sip.isp1.test.com"

2 5

[Users] new to tls
by olivier.taylor 22 May '06

22 May '06

hi all, just a Tls noob question : how to monitor the Tls traffic on the server? using Ngrep or another tool? thanks, Olivier

2 1

[Users] port setting
by unplug 22 May '06

22 May '06

Hi, Can I add some more ports for openser other than 5060? Is there any port range using in openser? I have set one more port 6060 in my configuration file as below. listen=IP:5060 listen=IP:6060 port=5060 children=4 Users using port 5060 is working fine. However, those users using 6060 will experience call drop around 1 minute after connection. In the log from ngrep, I find message 408. SIP/2.0 408 Request Timeout It may the cause to drop the call. However, I have no idea why 6060 will get a call drop problem. Does it any other reason for it? Thanks for help.

2 1

[Users] tls
by Olivier Taylor 22 May '06

22 May '06

hi all, just a Tls noob question : how to monitor the Tls traffic on the server? using Ngrep or another tool? thanks, Olivier

1 0

[Users] Re: Users Digest, Vol 12, Issue 54
by Padmaja RV 22 May '06

22 May '06

Hi! I am a novice at openser. I have problems running the openser init script. I have done everything as mentioned in the below document. http://openser.org/dokuwiki/doku.php?id=make_openser.init_script_work I have downloaded and installed the monit s/w mentioned in the above page and did everythig that it suggested. However, when i run the /etc/init.d/openser start, it gives the following error: /etc/init.d/openser : line 64: /usr/local/bin/monit no such file or directory....... Please tell me what to do,,,,,,,, also, as I dont know anything about the monit configuration and the monitrc files, I have just copied the whole code below the line: vi /local/etc/monitrc file into that file which was otherwise empty. The URL is http://www.openser.org/dokuwiki/doku.php?id=make_openser.init_script_work I think the whole thing has to do something with the code there. Please tell me what is the correct way to do all this....................... Thanks and Regards ----- Original Message ----- From: <users-request(a)openser.org> To: <users(a)openser.org> Sent: Sunday, May 21, 2006 3:31 PM Subject: Users Digest, Vol 12, Issue 54 > Send Users mailing list submissions to > users(a)openser.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://openser.org/cgi-bin/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)openser.org > > You can reach the person managing the list at > users-owner(a)openser.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > > Today's Topics: > > 1. Empty proto in trusted table causes segfault (Script Head) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 20 May 2006 19:04:50 -0400 > From: "Script Head" <scripthead(a)gmail.com> > Subject: [Users] Empty proto in trusted table causes segfault > To: OpenSER-users <users(a)openser.org> > Message-ID: > <451eb55c0605201604w3c7e4ca3tb550ee843b23ed(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Just stumbled on this. Obviously there shouldn't be an empty field but > also > OpenSER should handle this gracefully. >

2 1

RE: [Serusers] Warining messages
by luke.2.pilgrim＠bt.com 22 May '06

22 May '06

Thanks for the info! Very helpful. Cheers, Luke. -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov Sent: 19 May 2006 15:40 To: serusers(a)lists.iptel.org Subject: Re: [Serusers] Warining messages Inline. >WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx You probably dont have a resverse lookup entry in your DNS server. > Also I am able to connect to ser internally but not via it's external address. > I have rtpproxy installed and I'm using the nathelper module. Not sure if they are > configured correctly but they seem to be running. > > Does anyone have any ideas or could you tell me the best way to debug? for > example can I moniter registration requests coming in? If you work in command line # ngrep -W byline -O output.pcap INVITE port 5060 5060 - change to whatever port your SER's listening on and you can also view output.pcap in Ethereal later If you have GUI, then use Ethereal (latest is 0.99.0) Good luck :) On 5/19/06, luke.2.pilgrim(a)bt.com <luke.2.pilgrim(a)bt.com> wrote: > Hi all, > > I recieve the following warning messages when loadinf up ser: > > WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx > > Is this something to worry about? > > Also I am able to connect to ser internally but not via it's external address. I have rtpproxy installed and I'm using the nathelper module. Not sure if they are configured correctly but they seem to be running. > > My client is behing NAT but my server is publically available. Does anyone have any ideas or could you tell me the best way to debug? for example can I moniter registration requests coming in? > > Regards, > > Luke. > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Users] router with qos and compatible with stun
by Laurent Schweizer 22 May '06

22 May '06

Hello, I have a client that needs 20-26 simultaneous voip connections and I don't want to relay all this traffic. So I m looking for a router with non symmetric NAT for SDSL. (to use STUN) If someone know and can recommend me a good router. Thanks Laurent

3 2

← Newer
1
...
17
18
19
20
21
22
23
...
51
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2006