Hi,
Anyone has experienced an one way audio problem after a call is made?
Here is my case.
openser1.0.1 + mediarproxy 1.4.2
User behind NAT can make a call without problem.
When user with no NAT (direct connect to the internet), one way audio
will happen. Anyone can suggest a way to trace the problem.
Thanks,
unplug
Hi,
Is there any functionality implemented in SER/Openser which allows to detect
dead endpoints ?
Gnugk implements this with tcpkeepalive timeouts. Is there any equivalent or
something similar in SER which would prevent non-active calls to hang - and
incurr possibly large costs ?
TIA for your help in the matter
Gerry
___________________________________________________________
NEW Yahoo! Cars - sell your car and browse thousands of new and used cars online! http://uk.cars.yahoo.com/
Hello list.
If i need to get several AVPs from the Radius answer message, how is
the format for ATTRIBUTE SIP-AVP in the Radius message?.
I need 3 AVP's from a User :
state1:off
state2:on
state3:sip:12345@mydomain.com
When i need just one AVP to load is easy to add the Radius parameter
SIP-AVP like this
SIP-AVP=state1:off
But to add the other two AVP's how is the format ?
SIP-AVP=state1:off;state2:on;state3:sip:12345@mydomain.com ????
Can someone help me here ?
Thanks in advance
Regards,
Ricardo Martinez.-
Hi everyone,
I have some problems with serctl script . I can't run some functions. I
can add subscribes, run serctl ps, but for eg. serctl moni gives me
this error:
root@sip:ttyp1~-09:08-#serctl moni
[: unexpected operator
[: -ne: unexpected operator
root@sip:ttyp1~-09:08-#
Looks like shell lexical mistake but I dont't see it in a code. Maybe
anyone had this problem before?
I'm trying ser-0.9.6 on FreeBSD5.5 .
Thanks in advance,
Mindaugas
Hi Juha I recently installed SER 0.9.6 from the Debian Distro and I'm
looking for the lcr module for this version.
Where could I get it?
Regards
Alberto Cruz
Hi All,
I have built an ser server and offering postpaid voip right now. It's just a
basic ser setup, authenticate then make calls then i bill them.
But one client that offers Wi-Fi pepaid card would like to offer VoIP
service using their card and he's going to use my system. My main problem is
how to integrate it to their billing system.
how can i do it in such a way that his customer can use my voip service and
deduct the amount of usage on their Wi-Fi credit? And then I'll just bill my
client for the usage of all his customers.
hope my question was clear, thank you in advance.
Regards
Nhadie
________________________________________________
Message sent using UebiMiau 2.7
PEAR is extension repository for php. See http://pear.php.net/
Yes you have to install it. I don't know the how-to bellow, but it seems
very obsoleted. Why you do not follow oficial installing instructions
included in serweb in INSTALL file?
And please use mailing list for next questions.
Karel
fay butt napsal(a):
> hi,
> sorry, I don't know exectly what is peer?...I have to install it
> seperatly?...i just followed these instructions..... you can check what
> paths i am using...thanx again
>
>
> Step by Step Installation of WEBSER on RedHad Fedora Core 1
>
> When the original distribution is installed the directory locations do
> not match up with the typical apache file locations. These notes
> document all the changes needed. SUGGESTION: For the Tutorial we should
> develop a new install TAR so delegates do not spend 30 minutes editing
> all the files.
>
>
> * Get the TAR, un-tar and place the files in the right directory
> o
> from SER <http://www.iptel.org/> or from this server
> <http://www.aarnet.edu.au/events/conferences/2004/apan-questnet/sipworkshop/…>
> o
> untar
> *tar -xvzf serweb_2004-01-04.tar.gz*
> o change directory to where the files were untared to
> *cd serweb_2004-01-04*
> o
> Create the directory and move the files there
> *mkdir /var/www/phplib
> chown root /var/www/phplib
> chgrp root /var/www/phplib
> chmod 755 /var/www/phplib
> cp ./phplib/* /var/www/phplib/ -R *
> o
> # Move the html files to the DocumentRoot directory
> *mkdir /var/www/html/serweb/
> chown apache /var/www/html/serweb/
> chgrp root /var/www/html/serweb/
> chmod 755 /var/www/html/serweb/
> cp ./html/* /var/www/html/serweb -R*
> * edit these lines in */etc/php.ini*
> and change short_open_tag = Off" to "On"
> and change register_globals = Off" to "On"
> *
> Create these files as part of the serweb module.
> vi /var/www/html/serweb/prolog.html
> <body><H1>AARNet SER SIP Server</H1>
>
> vi /var/www/html/serweb/separator.html
> <HR>
>
> vi /var/www/html/serweb/epilog.html
> <H1>End of page text</H1></BODY>
> * ALL the files that follw are with respect to /var/www/html/serweb
> cd /var/www/html/serweb
>
> * edit these lines in ./config.php
>
> In general replace all 192.168.2.16 with 192.94.63.28
>
> #If you have changed the mysql username, dbname or password you
> need to change these:
> $this->db_name="ser"; //database name
> $this->db_user="ser"; //database conection user
> $this->db_pass="heslo"; //database conection password
> # NOTE: The above relate to the mysql database, see
> /usr/sbin/ser_mysql.sh.
>
> $this->root_path="/serweb/";
> #The above must match where the serweb html directory is put
>
> this->user_pages_path = this->root_path."user*_interface*/";
>
> $this->prolog="/serweb/prolog.html";
> $this->separator="/serweb/separator.html";
> $this->epilog="/serweb/epilog.html";
> # /* email address for questions concerning registration */
>
> $this->root_uri.$this->root_path."user*_interface*/my_account.php?#session#\n\n".
> $this->root_uri.$this->root_path."user_*interface*/reg/confirmation.php?nr=#confirm#\n\n".
>
>
> # There is heaps more to customise in this file which we will
> leave to the user. These include more email references
> # and text used in emails to users who register. Here are some
> example which do not need to be changed for this tutorial:
> $this->mail_header_from="Stephen.Kingham(a)aarnet.edu.au";
> $this->web_contact="sip:Stephen.Kingham@aarnet.edu.au";
> $this->title="The AARNet IP Telephony Site";
> $this->infomail = "Stephen.Kingham(a)aarnet.edu.au";
> $this->regmail = "Stephen.Kingham(a)aarnet.edu.au";
>
>
> * Edit /var/www/phplib/db_mysql.inc
> # You need to add the following to /* public: connection parameters */
> var $Host = "192.94.63.28";
> var $Database = "ser";
> var $User = "ser";
> var $Password = "heslo";
>
> The follwoing changes can be applied two ways:
> 1. Get and extract this tar file
> get the file fixupserwebphp.tar
> <http://www.aarnet.edu.au/events/conferences/2004/apan-questnet/sipworkshop/…>
> from this server
> put it in the directory /usr/local/src/ser
> issue these commands
> cd /var/www/html/serweb
> tar -xvf fixupserwebphp.tar
> *OR*
> 2. Manualy make all these changes
> Generaly you have to add "../" to all these files so that they point
> correctly to where the phplib is.
>
> *
> Edit ./admin/prepend.php
> # change $_PHPLIB["libdir"] = "*../*../../phplib/";
> * Edit ./user_interface/prepend.php
> # change $_PHPLIB["libdir"] = "*../*../../phplib/";
> * Edit ./user_interface/reg/prepend.php
> # change $_PHPLIB["libdir"] = "*../*../../../phplib/";
> * Edit ./admin/acl.php
> # change require "*../*../../phplib/oohforms.inc";
> * Edit ./admin/index.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./admin/users.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./user_interface/accounting.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./user_interface/find_user.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./user_interface/index.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/missed_calls.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/my_account.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/phonebook.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/send_im.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/notification_subscription.php
> # require "*../*../../phplib/oohforms.inc";
> * Edit ./user_interface/reg/finish.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./user_interface/reg/get_pass.php
> # require "*../*../../../phplib/oohforms.inc";
> * Edit ./user_interface/reg/index.php
> # require "*../*../../../phplib/oohforms.inc";
>
>
> LAST STEP: START APACHE
> /etc/rc.d/init.d/httpd start
>
> Plz, help me about that....
> Best regards
>
>
>
>
>
> */Karel Kozlik <karel(a)iptel.org>/* wrote:
>
> >
> > What kind of errors are you facing? Me, I am having trouble finding
> > DB.php (this file comes with PEAR).
>
> Hi,
> it seems PEAR is not installed correctly. Check the 'include_path'
> directive in your php.ini if contain path to dir where PEAR is
> installled.
>
> Karel
>
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
> ------------------------------------------------------------------------
> Yahoo! Messenger with Voice.
> <http://us.rd.yahoo.com/mail_us/taglines/postman3/*http://us.rd.yahoo.com/ev…>
> PC-to-Phone calls for ridiculously low rates.
Hi,
Before diving myself into the details: Does anyone know
what is the reason for (and how can we overcome) an
out-of-memory error that OpenSER throws when establishing
a database connection on parsing the config file (startup)?
An almost identical config file runs without troubles on
another system (SuSE linux 9.2 instead of 10.0, i.e.,
mysql version 4.0.x instead of 4.1.1). Openser is a
CVS snapshot dated 12.03.2006.
Please see the attached startup log - I find it strange
that OpenSER removes the mysql connections from the pool
after having created them and afterwards creates them
again. Any "linger"-issues?
Log attached; relevant script excerpt:
184> if(save("location"))
185> {
186> xlog("L_INFO","$rm: SUCCESS saving location info\n\n");
187>
188> }
189> else
190> {
191> xlog("L_INFO","$rm: ERROR while saving location info\n\n");
192> }
193> return;
In addition, when commenting out the save("location")
statement, OpenSER stops at the next avp op. Apparently
there is really a memory problem. Any idea what can be
the reason (1GB of RAM + 2 GB of swap should be
sufficient... ;)
tia,
best regards
--Joachim
Hi everyone,
I installed the serweb according to the instructions but it doesn't work when i type http://localhost/index.php in the browser. I followed these instructions...
Step by Step Installation of WEBSER on RedHad Fedora Core 1 When the original distribution is installed the directory locations do not match up with the typical apache file locations. These notes document all the changes needed. SUGGESTION: For the Tutorial we should develop a new install TAR so delegates do not spend 30 minutes editing all the files.
Get the TAR, un-tar and place the files in the right directory
from SER or from this server
untar
tar -xvzf serweb_2004-01-04.tar.gz
change directory to where the files were untared to
cd serweb_2004-01-04
Create the directory and move the files there
mkdir /var/www/phplib
chown root /var/www/phplib
chgrp root /var/www/phplib
chmod 755 /var/www/phplib
cp ./phplib/* /var/www/phplib/ -R
# Move the html files to the DocumentRoot directory
mkdir /var/www/html/serweb/
chown apache /var/www/html/serweb/
chgrp root /var/www/html/serweb/
chmod 755 /var/www/html/serweb/
cp ./html/* /var/www/html/serweb -R
edit these lines in /etc/php.ini
and change short_open_tag = Off" to "On"
and change register_globals = Off" to "On"
Create these files as part of the serweb module.
vi /var/www/html/serweb/prolog.html
<body><H1>AARNet SER SIP Server</H1>
vi /var/www/html/serweb/separator.html
<HR>
vi /var/www/html/serweb/epilog.html
<H1>End of page text</H1></BODY>
ALL the files that follw are with respect to /var/www/html/serweb
cd /var/www/html/serweb
edit these lines in ./config.php
In general replace all 192.168.2.16 with 192.94.63.28
#If you have changed the mysql username, dbname or password you need to change these:
$this->db_name="ser"; //database name
$this->db_user="ser"; //database conection user
$this->db_pass="heslo"; //database conection password
# NOTE: The above relate to the mysql database, see /usr/sbin/ser_mysql.sh.
$this->root_path="/serweb/";
#The above must match where the serweb html directory is put
this->user_pages_path = this->root_path."user_interface/";
$this->prolog="/serweb/prolog.html";
$this->separator="/serweb/separator.html";
$this->epilog="/serweb/epilog.html";
# /* email address for questions concerning registration */
$this->root_uri.$this->root_path."user_interface/my_account.php?#session#\n\n".
$this->root_uri.$this->root_path."user_interface/reg/confirmation.php?nr=#confirm#\n\n".
# There is heaps more to customise in this file which we will leave to the user. These include more email references
# and text used in emails to users who register. Here are some example which do not need to be changed for this tutorial:
$this->mail_header_from="Stephen.Kingham(a)aarnet.edu.au";
$this->web_contact="sip:Stephen.Kingham@aarnet.edu.au";
$this->title="The AARNet IP Telephony Site";
$this->infomail = "Stephen.Kingham(a)aarnet.edu.au";
$this->regmail = "Stephen.Kingham(a)aarnet.edu.au";
Edit /var/www/phplib/db_mysql.inc
# You need to add the following to /* public: connection parameters */
var $Host = "192.94.63.28";
var $Database = "ser";
var $User = "ser";
var $Password = "heslo";
The follwoing changes can be applied two ways:
1. Get and extract this tar file get the file fixupserwebphp.tar from this server
put it in the directory /usr/local/src/ser
issue these commands
cd /var/www/html/serweb
tar -xvf fixupserwebphp.tar
OR 2. Manualy make all these changes Generaly you have to add "../" to all these files so that they point correctly to where the phplib is.
Edit ./admin/prepend.php
# change $_PHPLIB["libdir"] = "../../../phplib/";
Edit ./user_interface/prepend.php
# change $_PHPLIB["libdir"] = "../../../phplib/";
Edit ./user_interface/reg/prepend.php
# change $_PHPLIB["libdir"] = "../../../../phplib/";
Edit ./admin/acl.php
# change require "../../../phplib/oohforms.inc";
Edit ./admin/index.php
# require "../../../../phplib/oohforms.inc";
Edit ./admin/users.php
# require "../../../../phplib/oohforms.inc";
Edit ./user_interface/accounting.php
# require "../../../../phplib/oohforms.inc";
Edit ./user_interface/find_user.php
# require "../../../../phplib/oohforms.inc";
Edit ./user_interface/index.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/missed_calls.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/my_account.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/phonebook.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/send_im.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/notification_subscription.php
# require "../../../phplib/oohforms.inc";
Edit ./user_interface/reg/finish.php
# require "../../../../phplib/oohforms.inc";
Edit ./user_interface/reg/get_pass.php
# require "../../../../phplib/oohforms.inc";
Edit ./user_interface/reg/index.php
# require "../../../../phplib/oohforms.inc";
LAST STEP: START APACHE
/etc/rc.d/init.d/httpd start
Plz, help me how i can configure it to work....
waiting positive response...
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
